Used Plastic for sale (6,411)

Condition: used, tank capacity: 590 l, GENERAL Design: Container Remarks: Frame made of V2A; Internal dimensions approx. 1100 x 700 mm; Wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (presumably Teflon); Outlet design may vary on some containers (see last 3 photos) Total width: 810 mm Kedpfx Ahjyck Dws Nell Total height: 1,200 mm Total length: 1,230 mm Top: Open with loose cover Location: Bremen Volume: 590 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Pharmaceutical TANK Bottom: Conical bottom Supporting structure: Frame EQUIPMENT Note: Signs of use

Condition: used, tank capacity: 2,000 l, GENERAL Design: Container Notes: Internal basic dimensions approx. 1,500 x 1,500 mm; wall height approx. 500 mm; cone height approx. 700 mm; discharge with Matcon cone closure (emptying via Matcon discharge station, which is not included in the offer); manhole diameter approx. 630 mm; plastic rails (presumably Teflon) under the frame (see photos) Total width: 1,550 mm Total height: 1,600 mm Total length: 1,550 mm Location: Bremen Volume: 2,000 liters Product contact material: V4A 1.4401/04 (AISI 316) Condition: used last application: pharmaceutical industry TANK Bottom: conical bottom Support design: frame EQUIPMENT Manhole / access port: in the upper bottom Outlet: 430 mm Note: signs of wear Kedeyckxzepfx Ah Njll

Condition: used, tank capacity: 570 l, GENERAL INFORMATION Kedpfx Ajyckpyoh Njll Equipment: Butterfly valve Design: Container Remarks: Mobile frame made of V2A stainless steel with 4 plastic castors; manhole diameter 850 mm with loose lid; minor differences in container design possible Overall width: 1,040 mm Overall height: 1,150 mm Overall length: 1,350 mm Location: 5 x Bremen, 92 x external warehouse Technical documentation: Drawing Nameplate: Volume: 570 liters Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last application: food industry TANK Bottom: Conical bottom Support type: mobile frame EQUIPMENT Manhole / dome: on top Outlet: 250 mm Note: signs of use

Condition: used, tank capacity: 500 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Base frame, Fe (galvanised; each with a bolted plastic plate at the bottom; see photos); manhole cover without fastening screws; centrally with 1 connection DN 100 DIN 11851 (see photos); on one container, the nameplate is missing (on this container, two forklift pockets are also slightly bent) Total width: 1,030 mm Total height: 1,280 mm Total length: 850 mm Location: Bremen Nameplate: Volume: 500 litres Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last intended use: food TANK Footing type: Frame EQUIPMENT Kodpfoyckmxex Ah Noll Manhole / Dome: in top head (DN 400) Outlet: DN50 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 8,800 l, GENERAL Equipment: Level indicator (without guarantee), butterfly valve Design: rectangular Notes: One manhole approx. 325 x 420 mm in the front wall; tanks were professionally cleaned and overhauled by the manufacturer in 2024; factory-new residual drain valves (bolted to reduce outlet to DN 50 DIN 11851 with butterfly valve) and manhole gaskets installed; walls outwardly dished; minor dents possible in the front wall; overall height including end of the plastic tube level indicator approx. 3,850 mm Overall width: 1,580 mm Overall height: 3,700 mm Overall length: 2,600 mm Location: Bremen Volume: 8,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last purpose of use: wine storage TANK Support design: height-adjustable feet Number of feet: 4 pcs Kodpfjyckk Dsx Ah Noll EQUIPMENT Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 7,400 l, GENERAL Equipment: Level indicator (without guarantee), butterfly valve Design: Rectangular Remarks: 1 manhole approx. 325 x 420 mm in the front base; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (reducing the outlet to DN 50 DIN 11851 with butterfly valve when bolted on) and manhole gaskets have been installed; walls are outwardly dished; total height including end of plastic tube level indicator approx. 3,850 mm Overall width: 1,320 mm Overall height: 3,700 mm Overall length: 2,550 mm Location: Bremen Volume: 7,400 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: Adjustable feet Klsdpfoyckh Nsx Ah Nol Number of feet: 4 pieces EQUIPMENT Outlet: DN65 DIN 11851 MATERIAL CHARACTERISTICS Foot material: Stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: butterfly valve, crane lugs Construction: upright Remarks: Tanks are slightly out-of-round due to their construction; containers have minor (sometimes more pronounced) dents; some container feet are pressed into the lower base; tank lids are made of plastic (2 containers are missing their lids; one lid has drill holes; see photos) Internal diameter: 990 mm Overall height: 1,850 mm Top: open with loose lid Location: Bremen Kljdpfx Aheyckg Es Njl Volume: 1,000 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,260 mm Previous use: foodstuff TANK Base type: feet Number of feet: 4 pcs EQUIPMENT Outlet: DN100 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: ball valve Design: container Remarks: Frame, Fe (galvanised); manhole diameter approx. 390 mm; ball of the ball valve made of plastic (presumably Teflon) Total width: 840 mm Total height: 1,610 mm Total length: 1,240 mm Location: Bremen Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: protective coating TANK Base design: frame EQUIPMENT Manhole/dome: in the top head Kljdpfxoyci U Us Ah Nol Outlet: 22 mm Note: slight adhesions, signs of use

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, steel (galvanized); container made of 1.4435 (V4A) with plastic inner lining Overall width: 830 mm Overall height: 1,450 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: Pharmaceutical industry TANK Max. permissible operating temperature: 80 °C Bottom: Conical bottom Mounting style: Mobile on castors EQUIPMENT Kledsyci Syjpfx Ah Njl Manway / Dome: in the top (DN 400) Outlet: 250 mm Note: Signs of wear

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); container made of 1.4435 (V4A) with plastic inner coating Overall width: 830 mm Overall height: 1,550 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Kodpsyci Sgofx Ah Nsll Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: pharmaceutical industry TANK Max. permissible operating temperature: 80 °C Bottom: conical bottom Support type: mobile frame EQUIPMENT Manhole/dome: on top head (DN 400) Outlet: 250 mm Note: signs of use

Condition: used, tank capacity: 350 l, GENERAL Fittings: Disk valve Design: upright Remarks: Mobile on 4 plastic casters; loose aluminium lid; tank slightly out of round Internal diameter: 790 mm Total height: 1,000 mm Top: open with loose lid Location: Bremen Volume: 350 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 750 mm Kjdpfx Ahjyci I Is Nsll Previous application: pharmaceutical TANK Bottom: flat bottom Stand type: mobile on casters FITTINGS Outlet: DN32 DIN 11851

Condition: used, tank capacity: 60 l, GENERAL Equipment: Drain cock Design: suspended Comments: Tanks hang loosely in a V2A chassis with 6 plastic rollers; outlet with drain valve (1 x DN 20, 1 x DN 25) Inner diameter: 430 mm Klodpfxjyci Ize Ah Nsl Total height: 900 mm Top: open with loose lid Location: Bremen Volume: 60 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: pharmaceutical VESSEL Lower bottom: flat bottom with slope Mounting type: mobile frame

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Features: Disc valve, crane lugs Kjdpfoyci H Rex Ah Noll Design: Container Remarks: Frame made of V2A stainless steel; manhole cover provided by a loose plastic lid (three containers are missing the lid); slight differences in container construction; some containers lack type plates; some containers have dents. Optional stainless steel manhole cover with tension ring available at extra cost. Overall width: 1,040 mm Overall height: 1,520 mm Overall length: 840 mm Location: Bremen Technical documentation: drawing Type plate: Volume: 650 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: ink production TANK Bottom: conical bottom Support: frame-mounted EQUIPMENT Manhole / Access: in top (DN 400) Outlet: 150 mm Note: minor residue and signs of wear

Condition: used, tank capacity: 200 l, GENERAL Klodpoyci Hdefx Ah Nel Design: rectangular Overall width: 835 mm Overall height: 410 mm Overall length: 1,235 mm Top: open Other: Material: HD-PE Manufacturer: asecos General Building Authority Approval Approval No.: Z-40.22-252 Load capacity: 500 kg with evenly distributed load Internal height: 280 mm Weight: 26 kg/each Type plate missing for 6 units Tubs can be nested when empty Individual tubs may have minor damage on the corners (see photos) Location: Bremen Type plate: Volume: 200 liters Product-contact material: plastic Condition: used FEATURES Outlet: not available

Condition: used, tank capacity: 220 l, GENERAL Design: upright Notes: Container is slightly out of round due to construction; mobile on 4 plastic castors; slight differences in the design of the two containers (e.g. outlets, plastic castors) Internal diameter: 610 mm Total height: 1,030 mm Top: open with loose lid Location: Bremen Volume: 220 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Kljdpjyci Dvjfx Ah Nel Cylindrical height: 720 mm Previous use: cosmetics CONTAINER Base design: mobile on castors EQUIPMENT Outlet: 25 mm

Condition: used, tank capacity: 300 l, GENERAL Design: upright Remarks: Container is slightly out of round due to design; mobile on 4 plastic castors; slight differences in execution between the two containers; 1 container with attached outlet fitting (disk valve), which reduces the outlet to DN 25 DIN 11851 Internal diameter: 790 mm Total height: 850 mm Top: open with loose lid Location: Bremen Volume: 300 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 590 mm Previous use: cosmetics TANK Bottom: flat bottom with slope Base type: mobile on castors FEATURES Ksdpfjyci Dpsx Ah Njll Outlet: DN50 DIN 11851

Condition: used, tank capacity: 400 l, GENERAL Equipment: Disc valve Design: upright Notes: Container is slightly out-of-round due to construction; mobile on 4 plastic castors; the outlet fitting is screwed onto an outlet DN 50 DIN 11851; lid material 1.4301 (V2A) Internal diameter: 790 mm Total height: 1,100 mm Top: open with loose lid Klsdpfx Ahoyci Dis Njl Location: Bremen Volume: 400 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 820 mm Last application: cosmetics CONTAINER Bottom: flat bottom with slope Type of support: mobile on castors EQUIPMENT Outlet: DN25 DIN 11851 MATERIAL SPECIFICATION Top material: AISI304 (V2A) 1.4301

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Klsdpfx Ahjxqdtao Njl Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, serial movement, holding pressure via check valve Hydraulic ejector Ejector quick-coupling Connector for ejector platen protection

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Kljdpfx Ajxqdxish Nel Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73

Condition: used, tank capacity: 550 l, GENERAL Equipment: Venting/inlet and outlet valve, disc valve Design: upright Speed: 190 RPM Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Top cover: agitator crossbeam with folding lid Agitator: paddle agitator Base type: PE base Location: Bremen Ksdpsxqbh Isfx Ah Nell Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Legs material: plastic AGITATOR 1 Voltage: 400 volts Agitator arrangement: centralized on top cover

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) Ksdpfx Aowrn Iyjh Njll The machine is CE-certified.

Condition: used, Year of construction: 2008, total height: 1,450 mm, total length: 1,750 mm, total width: 1,500 mm, Empty weight: 750 kg Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 Ksdpfx Aheych Elj Noll - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2008, operating hours: 26,580 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6, overall weight: 4,600 kg, screw diameter: 40 mm, This Battenfeld HM 100/525 was manufactured in 2008. A hydraulic injection moulding machine with a screw diameter of Ø40 mm and injection volume of 251 cm³. It features tie bar spacing of 470 x 420 mm and has been operating for approximately 26580 hours. Currently used with a Battenfeld UNIROB R10S robot for producing polypropylene containers. Net weight is 4600 kg. Contact us for more information about this machine. • Total operating hours: approx. 26,580 h • Current application: Producing PP (polypropylene) containers; currently running with a robot (see Additional equipment) • Injection unit: • Injection volume: 251 cm³ • Clamping unit: • Tie bar spacing: 470 x 420 mm • Number of core pulls: 1 Additional equipment • Robot: • Manufacturer: BATTENFELD • Model: UNIROB R10S • Year of manufacture: 2007 Klsdpfx Ahoychvqs Nsl • Type: Cartesian handling robot

Year of construction: 2014, operating hours: 36,714 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6P, overall weight: 6,500 kg, screw diameter: 50 mm, This Battenfeld HM 150/750 UNILOG B6P was manufactured in 2014. It features a screw diameter of Ø50 mm and an injection volume of 441 cm³. The tie bar spacing is 520 x 470 mm, and it has operated for approximately 36714 hours. Ideal for polystyrene processing, this hydraulic injection moulding machine weighs 6500 kg. If you are looking to get high-quality injection molding capabilities, consider the Battenfeld HM 150/750 UNILOG B6P machine we have for sale. Contact us for more information. • Injection volume: 441 cm³ • Clamping unit: • Tie bar spacing: 520 x 470 mm • Number of cores: 1 • Operating data: • Total operating hours: approx. 36,714 h Kodjychiqjpfx Ah Njll • Hydraulics & electrics: • Hydraulic system pressure: 277 bar • Type of current: 3-phase + N • Frequency: 50 Hz • Rated voltage: 400 V • Current application: • Material: Polystyrene (PS)

Condition: ready for operation (used), Year of construction: 1995, This LEONHARD KURZ Fürth KTF 70737L was manufactured in 1995. It features a Mikromat stretch control, a fixed stop side on the left, and an insertion table for angular insertion of long cross pieces. It includes two grinding units for straight edges and a KURZ embossing unit with unwinding and winding capabilities. Consider the opportunity to buy this LEONHARD KURZ Fürth KTF 70737L edgebander. Contact us for more information. Kjdpfx Ahsycg Ule Nsll • Control: Mikromat stretch control • Stop side: Fixed on the left • Grinding: 2 x straight-edge grinding units, overall oscillating • Chamfering: VZK chamfer grinding units for upper and lower chamfer • Note: Free space available Additional equipment • KURZ embossing unit with unwinding and winding unit, incl. 3 hot embossing rollers • Insertion table for angular insertion of long cross pieces • Manually adjustable feed guide with plastic roller strip