Used Plastic Plate for sale (17,761)

Condition: used, The device is ready for use and was used in juice production as a cooler. Fedpfx Aezy Ac Ejk Ujpl Overall height: 1750 mm Overall width: 1700 mm Plate size: 370 x 1330 mm No nameplate with parameters. Please check my other listings.

Condition: used, Year of construction: 2004, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Fpjdpozxt Txsfx Ak Uol drive elektronisch zwei angetri

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: Fpedpfxszr Rqno Ak Ujl - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 equipped: Fedpfx Akszcuzys Uepl - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT Fpodpjtrkmnefx Ak Ujl SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: ready for operation (used), functionality: fully functional, actuation type: electric, number of rollers: 3, total length: 2,380 mm, total width: 620 mm, total height: 1,140 mm, input voltage: 400 V, For sale: a used, 100% functional three-roll sheet metal rolling machine with electric drive. The machine features a simple and very robust construction and is ready for use in a locksmith's workshop, production facility, or for sheet metal processing. The rolls are in good condition, with no significant grooves. Key technical data: - Machine type: 3-roll rolling machine - Power supply: 400 V (electric drive) - Maximum working width (sheet): 185 cm (1850 mm) - Overall dimensions (L x W x H): 238 cm x 62 cm x 114 cm - Technical condition: Used machine, fully functional, ready for connection. - Foot control: The machine is equipped with an external foot pedal (left/right), allowing the operator to work comfortably and freely manipulate the sheet with both hands. - Manual roll pressure: The roll position is adjusted smoothly using two upper pressure screws with convenient cranks. - Grooves on the rolls: One end of the working rolls has grooves, which enable the rolling (coiling) of rods or pipes. - Construction: Massive, welded steel frame providing high rigidity during bending and minimizing vibrations. Fpsdpfszzbv Tex Ak Usl Transportation is the buyer's responsibility.

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 116831, input voltage: 230 V, type of input current: AC, plate width: 850 mm, plate length: 1,050 mm, input frequency: 50 Hz, For sale is a Glunz & Jensen Unigraph Quartz Stacker Mk III 85/105 SP for the automatic transport and stacking of CTP/offset printing plates. Technical specifications: Manufacturer: Glunz & Jensen Model: Stacker Mk III 85/105 SP Machine type: PS 85/100 SP Year of manufacture: 01/2005 Power supply: 100/115/200/230 V Frequency: 50/60 Hz Single-phase Conveyor belts/round belts Tilting/stacking unit Sensor control Speed control for conveyor and tilting unit Fpsdpjzxf Dpsfx Ak Uel Condition: Used, well-maintained condition. Optical condition and scope of delivery can be seen in the original images.

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm Fpedpfx Akjzw Eyzs Uol T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Fedpfxsxtpwvo Ak Uopl Adjustable cutting angle

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. Fpodpozu N Ukjfx Ak Uel In good condition.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Fsdpfx Asznngxjk Ujpl Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Fpsdpfjxabvqex Ak Ujl Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Fjdpfx Akszcqy Sj Uopl Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop Fpedpfx Aoxaa I Sjk Ujl - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: excellent (used), Electro-permanent magnetic clamping plate 500 × 300 mm EPEFINE2 incl. control unit – sinker EDM / EDM Electro-permanent magnetic clamping plate, type EPEFINE2, including the corresponding control unit. Technical data: Magnetic clamping plate approx. 500 × 300 mm Fine transverse pole spacing 5 mm Fpsdpozyq Upefx Ak Uol Voltage 360 V DC Design for sinker EDM / EDM with special seal, special cable and special cable gland Polarity reversing control unit, type BUR-20 for EP system Magnetization/demagnetization Machine interlocking System installed in 2017; the original new price of all items at the time was €6,327 net / €7,529.13 gross, including transport. Inspection and collection possible by arrangement. Shipping/freight forwarding by agreement.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm Fedpfxjxab Tve Ak Uspl adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min Fpjdezkvx Uopfx Ak Uol back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, Year of construction: 1986, length 1000 mm Fpedpfx Aexab Dhsk Usl width 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003

Condition: new, functionality: fully functional, empty load weight: 300 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 25 h, Motor: 3kW. Lassú fordulat , fordulat: 200f/perc Bedobó: 400x400mm, Fedpfx Aozay A Rjk Uopl

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm Fodpfxeyyc A Ue Ak Uopl plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle Fedsy Rzklepfx Ak Uopl The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: Fjdpfx Asxab I Hsk Ujpl - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 2008, sheet width 4100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm no. of strokes 12 - 24 Hub/min cutting angle 1 ° 30 work height max. 865 mm back stop - adjustable 1.0 - 1000 mm down holder 20 Stück Control ENC 100 M column arm 50.0 mm oil volume 200 ltr total power requirement 15.0 kW range L-W-H 5230 x 2250 x 2150 mm weight 11460 kg New price ~ 50,000 euros (!!) Special price on request ----- NC electro-hydraulic swing cut shears * with DURMA "ENC 100 M" control * manual cutting gap adjustment (eccentric) * including pneumatic sheet holding device for thin sheet metal cuts ----- Equipment: - robust electro-hydraulic swing cut shears - including DURMA "ENC 100M" NC control unit * Back stop pre-selection - X axis * Quantity * Cutting length limitation * Pivoting operation, left front - Monoblock welded steel construction made of high-quality steel - CNC electro-motorized back stop * with ball screw and linear guides * Automatic retraction of the back stop during the cutting process Fpodpfx Asw U U T Tsk Usl - Light barrier protection for access to the rear of the machine - manual cutting gap adjustment via eccentric - high-performance hydraulic cylinder made of SAM 1040 material - high-quality chrome-plated and finely ground hydraulic piston - split, fold-up finger guard 1,000 mm - easy handling of the sheets via ball rollers in the table - 1x long side stop including mm scale and tilting cam - 3x front support arms - 1x freely movable foot switch - operating instructions Special accessories included: - pneumatic sheet holding device for cutting thin sheet metal - up to max. material thickness - ST .. 3.0 mm

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes 11 - 20 Hub/min oil volume 310 ltr. cutting angle 0.05 - 2.0 ° throat 350 mm Fpodpfxexaadao Ak Usl table height 900 mm total power requirement 22.0 kW weight of the machine ca. 13400 kg range L-W-H 5.110 x 2.570 x 2.400 mm Current new price approx. 80.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC sheet metal shear with slide guides * Includes CYBELEC "DNC 60 CUT" control system * Includes CNC electro-hydraulic cutting gap adjustment * Includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with slide guides - Includes CYBELEC CNC controller, model "DNC 60" - CNC electro-motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Automatically folds up at maximum travel, for longer cuts * Includes selectable retraction function ("swing-away function") * Positioning accuracy 0.1 mm * Approx. travel speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - 1x side stop with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Rear sheet chute (sheet inserts) - 1x freely movable foot switch - CE mark - Operating instructions

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs Fsdpfx Ajycxgmek Ujpl ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions