Used Plastic Molding for sale (6,886)

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Gbjdpfx Aksznll Seyeu

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Gbedpfx Akjzvgu Doyeu Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Gjdpfszrw Adjx Akyobu Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Gbodpszrgfhefx Akyju Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Gbjdpezxqycefx Akyju Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: used, Year of construction: 1998, operating hours: 129,241 h, functionality: unexamined, machine/vehicle number: 37064, clamping force: 800 kN, overall weight: 5,900 kg, Year of manufacture: 1998 Serial number: 37064 Weight: 5,900 kg Operating hours: 129,241 hours (as of 02/2025, continued operation until 12/2025) with ERC handling arm with Piovan material separator C10IX, SN: 3AL 9945 / Year of manufacture: 1998 with 2x Piovan temperature control units ETM09 with Engel ERC 23/3-CL, serial number 93996, year of manufacture 1998 Functionality and technical data have not been verified. without any further items/without any further accessories, unless explicitly stated as part of the item. If interested, please contact us via email! Gbodpfx Akjzv Rdijyeu

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm Gbedjzvwirjpfx Akyju • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine Gbjdpfx Akozypcfeysu

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Gedpfx Akjzvm Dljyobu Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Godpfxozvm T To Akyjbu Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Gjdpfsvxh Iujx Akyobu Immediately available from stock

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. NEW ! Gsdpfxsiyqile Akyobu We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice.

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 Injection Molding Machine Manufacturer: ARBURG Model: 320 C 400-170 Year of manufacture: 2006 Machine type: hydraulic injection molding machine for plastics Clamping force: 400 kN / 40 t Dimensions of mounting plates (H × V): 446 × 446 mm Distance between columns (H × V): 320 × 320 mm Minimum mold height: 200 mm Maximum opening / daylight: 550 mm Screw diameter: Ø30 mm – NEW screw Injection volume: 77 cm³ Maximum injection weight: 77 g Maximum injection pressure: 2,000 bar Rated power of the pump motor: 11 kW Heater power: 9.4 kW Net weight of the machine with control cabinet: approx. 2.3 t Gedpsxwu R Njfx Akyjbu Machine dimensions (L × W × H): 3.4 × 1.4 × 2.0 m Screw condition: The machine will be equipped with a brand new Ø30 mm screw before sale. Machine location: Poland

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Gedpfx Asr Dufbokysbu Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total width: 2,600 mm, total length: 18,000 mm, total height: 3,620 mm, input voltage: 400 V, input frequency: 50 Hz, The ADL 2500/6 INOX is a fully automatic production line for the manufacture of insulated glass. The line consists of a stainless steel washing machine and a panel press and is designed for efficient, precise, and reliable processing of insulated glass. Gbedpfx Akozzczdoysu The washing section is entirely made of stainless steel and equipped with six individually controlled brushes, suitable for processing Low-E glass. Thanks to the automatic glass thickness detection and the servo-controlled panel press, a constant and high-quality result is guaranteed. Year of construction: 02/2024 Maximum glass size: 2,500 × 3,210 mm Minimum glass size: 240 × 400 mm Insulated glass thickness: 10 – 60 mm Washing machine glass thickness: 3 – 12 mm (without adjustment) Maximum glass weight: 400 kg Power supply: 3 × 400 V + N + PE, 50 Hz Installed power: 43.5 kW Air pressure: 6 bar Air consumption: 70 l/min Transport speed: 0 – 6 m/min Dimensions (L × W × H): 21,000 × 3,300 × 3,530 mm Machine weight: 7,580 kg Direction of operation: left to right Complete stainless steel washing section Enclosed washing unit with sound insulation Six individually controlled brushes for Low-E glass Automatic detection of glass thickness Electric panel press with servo-controlled pressure regulation Touchscreen control (English or Italian) Industry 4.0 ready (OPC UA compatible) Output conveyor belts with dual speed for higher productivity Available from mid-September 2026. If interested, you can contact Carmen Ernest directly for a viewing or additional information. +31 6 14334647

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 150 mm Gbedpfx Aezvwqcokysu No of Grippers: 9

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 Gbodoz Ap Imepfx Akysu RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 271/1, overall weight: 700 kg, Semi-automatic PET bottle blowing machine for producing 5-gallon PET bottles. Includes heating and blowing unit. Supplied with 2 sets of 5-gallon blowing molds. Capacity: 60 bottles/hour. Gbedpozd Tdusfx Akyju

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Gbjdpfxsz Ayhqj Akyju Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate locking

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, total length: 3,800 mm, total width: 1,850 mm, total height: 2,150 mm, overall weight: 5,000 kg, Equipment: documentation/manual, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Gedpfjz Azdtox Akyebu Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: excellent (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, plate length: 680 mm, plate height: 740 mm, total length: 4,500 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock No.: 503558 Manufacturer: ENGEL Type: Victory 330-120 Tech Control: CC100 Year of manufacture: 2007 Operating hours: 68651 h Technical data, clamping unit Clamping force: 1200 kN Platen size h x v: 740 x 680 mm Minimum mold thickness: 300 mm Maximum mold thickness: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Centering of moving platen D: 125 mm Centering of fixed platen D: 125 mm Tool weight: 825 kg Technical data, injection unit Screw diameter: 35 mm Displacement: 154 ccm Injection pressure: 1600 bar Screw length: 20 l/d Screw stroke: 160 mm Gbedpez A D Dtjfx Akyju Screw speed: 400 rpm Free injection flow rate: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions L x W x H: 4.5m x 2.1m x 2.1m Total weight: 7300 KG Equipment Screen text in German CEE socket 16A Hydraulic core pull 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Leveling elements Interface for ejector plate locking Schuko socket 10A Technical data, handling Machine type: Linear Manufacturer: ENGEL Control: ER-HLI41VC

Condition: excellent (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 220 cm³, plate length: 760 mm, plate height: 760 mm, total length: 67,500 mm, total width: 2,000 mm, total height: 2,420 mm, overall weight: 8,500 kg, Equipment: documentation/manual, ENGEL e-motion 440-160 Stock No.: 503676 Manufacturer: ENGEL Type: e-motion 440-160 T Control: CC300 Year of manufacture: 2018 Operating hours: 33526 h Technical data, clamping side Clamping force: 1600 kN Tie bar spacing h x v: 520 x 520 mm Platen size h x v: 760 x 760 mm Minimum installation height: 375 mm Maximum installation height: 600 mm Maximum platen spacing: 1060 mm Godpez A S I Tjfx Akyebu Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 160 mm Tool weight: 1250 kg Technical data, injection side Screw diameter: 40 mm Displacement: 220 ccm Injection pressure: 1940 bar Screw length: 24 l/d Screw stroke: 175 mm Screw speed: 420 min Screw torque: 605 N Plasticizing rate: 33 g/s PS Free injection rate: 224 g/s PS Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions L x W x H: 6.75m x 2m x 2.42m Total weight: 8500KG Equipment Screen text in German Screen text in English CEE socket 32A Hydraulic core pull, 2x Hydraulic core pull unit Air valve 1x Machine with water manifold Machine without material hopper Machine without suction conveying system Pneumatically operated needle shut-off nozzle Leveling elements EUROMAP 63 interface EUROMAP 67 Handling interface Interface for ejector plate locking Schuko socket 10A

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Gbsdpfx Asz A Tgkjkyou Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Demonstration model, still in the box, Gedpfjz Az D Isx Akyjbu

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 60 mm, clearance between the columns: 800 mm, displacement volume: 769 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Equipment: documentation/manual, KRAUSS MAFFEI KM 420-1900 C2 Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 cc Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s PS Free injection rate: 700 g/s PS Number of heating zones: 6 Dimensions & Weight Gsdoz Dgcbspfx Akysbu Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment Screen text in German Hydraulic core pull, 4x Machine without handling system Machine without material hopper Leveling elements Tool heating, 12x