Used Plasma Tubes for sale (2,405)

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers Bwjdpfexw A Icjx Abbsh :-Safety device for wheel housing (foot switch)

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI Bwsdpfxoxv Nk Uo Abbsh :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: ready for operation (used), AEG / AVITEQ Vibrating tube (only 2 left ) 1 x : length 3000 mm – diameter 500 mm Bwedpfx Abetznitjboh with two pieces vibration motors of each 1,3 kW 1 x : length 5900 mm – diameter 500 mm with two vibration motors of 2.3 kW each

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm Bjdpex E Rdwsfx Abbswh - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: new, Year of construction: 2024, Wieland, made in Germany 12.5m rings, 300m/palet 10mmx1mm x isolation 9mm Bsdpfx Asyapwqjbbjwh brandnew

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. Application Types Cutting Bwsdpfsx S Skfex Abbeh

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 23005, table length: 4,750 mm, table width: 2,000 mm, Equipment: documentation/manual, Offered is a SPIRO® Cutlass plasma cutting system combined with a Hypertherm Powermax unit. The system includes a PC with HVAC CamDuct software (the 2009 version is no longer supported). The Sideros filter unit is also included. Bsdpjwc Nm Eefx Abbswh

Condition: good (used), Year of construction: 2021, operating hours: 5,400 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, - Power source Hypertherm Powermax 65 - Piercing up to max. 16 mm - Needle marker - TEKA filter system Bjdpfstlq Riex Abbjwh Machine on: 5400 h Cutting times: 590 h Table size: 6000x2000 mm Permissible sheet thickness: up to 100 mm material thickness High-quality linear guides

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Anti-collision detector with inductive electromechanical impact control Bwodpowlruksfx Abboh Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Bwodpfx Absuxc Rhebeh

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC Plasma Cutting Machine for Flue Pipe and Ventilation Component Production Condition: Used, in good technical order, currently connected – available for on-site inspection and testing. This equipment is designed for manufacturing pipes, flue pipes, and ventilation elements from sheet metal and light metals. Technical Specifications Model: TTENGINEERING Made in: Italy Year of manufacture: 2007 Pipe cutting diameter: from Ø60 mm to Ø600 mm Maximum workpiece length: 1500 mm Sheet thickness (official): 0.5 – 1 mm Tested capability: cuts up to 3 mm wall thickness (depending on plasma source power and metal type) Plasma sources: 2 units – 60A and 80A Plasma power: 60 A / 80 A (depending on selected source) Features and Equipment: - Fully programmable CNC-controlled machine - Capability to generate cutting contours based on models or templates - Precise automatic positioning and rotation system Bsdpjxlp Sqefx Abbswh - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable power - Supplied with two plasma sources (60A and 80A) to suit product requirements Applications: - Suitable for the production of ventilation systems, flue pipes, air ducts, and various tubular structures. - Ideal for cutting thin sheet metal (0.5–1 mm) and processing thicker wall sections (up to 3 mm). - Utilizes CNC technology to ensure high cutting precision and repeatability while reducing manual labor needs. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Manufacturer: AXA Bjdpfx Ajt Tdp Tjbbewh Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Aventa PLUS 4 x 2, type of input current: DC, working range: 40,002,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, cutting current: 300 A, Equipment: documentation/manual, Macchina in operazione Bsdpfx Asw Al Rmsbbswh

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. Bwsdpfx Abex Srklsbsh The machine is currently disassembled.

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: Bwjdpfx Abjx Sqy Sebsh - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN - Condensate treatment system type: Aquamat CF 3

Year of construction: 2026, condition: new, Winder for spool´s up to 10kg gross weight with clamping conus and traverse guiding, adjustable speed and travelling width Bwodpedlpyuofx Abbeh

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Bwsdpou E H Tgofx Abbsh

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 500 h, control type: PLC-controlled, degree of automation: automatic, pipe length (max.): 3,000 mm, tube wall thickness (max.): 2 mm, Metalworking company sell megabender 030 In the equipment have mandrels for tube: 60,3mm x 2mm 50mm x 2mm 40mm x 2mm 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (3000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping Bjdpfxsv Di Dns Abbewh - mandrel feed / extract - 30 programs x 9 bending angle + correction angle Stainless steel 2mm steel 3mm cooper and aluminium up to 4mm

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Bwedpfx Asn Upglsbboh

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Bwjdpfx Aox R D Exjbboh Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: good (used), Year of construction: 2005, Static Garment Overhead System, Round Tube Overhead Conveyor, Meiko, approx. 5,000 m static crane rails, approx. 3,600 m trolley tracks, approx. 1,200 trolleys, 3 levels, incl. 2,852 m² mezzanine floor area, total area approx. 8,556 m² - used - : Net price ex-site: only €149,500 (net) including dismantling, packing, and loading Manufacturer: Meiko (SSI Schäfer) Technical support available from, e.g., BKLS Maschinenbau GmbH & Co. KG Type: Round Tube Overhead Conveyor Year of construction: 2005 Base area: approx. 2,852 m² (L = approx. 64.7 m x W = approx. 44.1 m) Total height: approx. 7.10 m Incl. incline conveyor Incl. 2 telescopic conveyors for easy loading and unloading of hanging textiles More detailed information available upon request! Pos. 1 LEVEL 0 (+0.000) 1,293 m horizontal running rail 52 m sloped running rail 52 m derailment protection for running rail 38 pcs. swing switches 2 pcs. spring switches Etc. Pos. 2 LEVEL 1 (height +3.790 top edge of floor) 472 m horizontal running rail 30 m sloped running rail 970 m running rail between storage areas 60 m derailment protection for running rail 48 pcs. swing switches 57 pcs. ball joint switches, complete, 2-way 2 pcs. ball joint switches, complete, 3-way 17 pcs. catch switches 3 pcs. HD manual stop 273 m fixed single-sided storage rail, double-deck 3,228 m fixed double storage rail, double-deck Etc. Pos. 3 LEVEL 2 (height +6.815 m top edge of floor), 1st construction phase 366 m horizontal running rail 22 m sloped running rail 398 m running rail between storage areas 38 m derailment protection for running rail 24 pcs. swing switches 31 pcs. ball joint switches, complete, 2-way 1 pc. ball joint switch, complete, 3-way 12 pcs. catch switches 3 pcs. HD manual stop 147 m fixed single-sided storage rail, double-deck 1,344 m fixed double storage rail, double-deck 1,170 m double pipe construction, galvanised (struct.), 2 x Ø 5/4", H = 150 mm 814 m² intermediate mezzanine Etc. Pos. 4 VERTICAL CONVEYING, LEVEL 0 TO LEVEL 2 1 pc. chain conveyor M 1, total length 112 m, consisting of: 1 pc. drive incl. maintenance switch, V = 12.5 m/min 1 pc. tensioning station 112 m conveyor chain incl. carrier, pitch 830 mm 1 pc. service station, L = 0.75 m 2 pcs. separable conveyor profile, L = 1.0 m 85 m straight conveyor profile 6 pcs. horizontal curve 180°, r = 600 mm 2 pcs. horizontal curve 90°, r = 600 mm 2 pcs. horizontal curve 45°, r = 600 mm 4 pcs. vertical curve UP 30°, r = 900 mm 4 pcs. vertical curve DOWN 30°, r = 900 mm 5 pcs. vertical curve UP 15°, r = 900 mm 5 pcs. vertical curve DOWN 15°, r = 900 mm 1 pc. cut-out for tensioning station 40 m derailment protection for running rail Pos. 5 TROLLEYS Approx. 1,200 double roller trolleys, type 53.083, with coding and coupling, loading capacity = 660 mm Pos. 6 TROLLEY CARS 10 pcs. empty trolley transport carts Pos. 7 CONTROL SYSTEM FOR CONVEYORS Etc. Pos. 8 2,852 m² STEEL MEZZANINE Steel mezzanine according to DIN 17100 and DIN 18800 Bwodpfsx R Dnasx Abboh - Column grid approx. 4,970 x 4,900 mm, L = approx. 64.7 m; W = approx. 44.1 m; H = 3.10 m - Surface treatment: sandblasted, primed, and painted Color shade according to RAL, e.g., Crenteyreiss RAL 9001 - Anchoring: Column with base plate anchored to the floor Technical specifications: Load capacity of walkable surface 100 or 250 kp/m² Running rail load 60 kp/m Storage rail load 75 kp/m Building services 15 kp/m² Inspection is expressly recommended! Condition: good to very good Available: approx. Q2 2026 Loca

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Bwjdox R A Nvepfx Abbsh Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: used, Manufacturer: Hanovia UV Bedpfx Aox R A Ilebbjwh Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: used, Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features Bjdpfx Absx R Aw Hjbowh S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Bwedex R Arkspfx Abbeh Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A