Mandrel tube bending machine

Cesurbend PBNC-65

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. Kwedpfx Asxvzt Ujhvew • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets Kjdpfx Ahsu Ibvujvjww -div. auxiliary and clamping devices *

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Kjdpjd N Rb Dsfx Ahvoww Drilling front heads on each side included Very good condition. Available immediately.

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Kjdpfsuf Nr Ajx Ahveww Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors Kwjdpfx Aettah Rshvow → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: ready for operation (used), Elgo CNC controlled machine, very easy and user-friendly Kedexpghqjpfx Ahvsww max tube cap: dia 76 mm x 4 mm thickness max square tube: 70 x 70 mm max radius: 600 bending angle: 180° Standard tooling 3D Special tooling on request Length: 1200 mm Width: 800 mm Height: 1300 mm

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Kwodpfxoxzubvs Ahvow Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.

Condition: new, Year of construction: 2022, messurements (LxWxH): 3660 x 1340 x 2500number of axes: 3pressure: 120 Tonnenweight approx.: 7000 kgoil filling: 200 Litermotor power: 11 Press Brake Control Unit : Esa S 630 Cnc 10 2d Graphical Screen - Touchscreen Control Unit Panel : Swivel Pendant Arm Hydraulic Press Brake Valve Option : With Ce Safety Signals Press Brake Safety Plc : Mcs Plc Safety Plc Press Brake Laser Safety System : Dsp-Ap Safety Block Laser Manual Height Adjustment) Press Brake Back Gauge : X Axis, 500 Mm Range, Including 2 Fingers, Manually Adjustable In Height And In Lateralposition. Press Brake Finger For Back Gauge : Standard Xf Arka Ve Yan Muhafazalar : Var (Ce'Li Model) Press Brake Top Tool Clamping : Manual European Type L:150 Mm (Promecam) Press Brake Top Tool : Eurostamp 1260 / Standard (835 Mm And 805 Mm Sectioned To 595 Mm And 210 Mm ) Press Brake Bottom Die Holder : Mechanical European Type Standard Width (Promecam) Press Brake Crowning : Cnc Adjustable Motorized Crowning (V-Axis) Press Brake Bottom Die : Eurostamp 2067 / Standard (835 Mm And 805 Mm Sectioned To 100 Mm Lh, 395mm, 210 Mm And 100 Mm Rh) Press Brake Front Support : Xf Ön Destek Press Brake Front Support Number : 2 Pcs Support, Manually Adjustable In Height And Inlateralposition. Electrical System : 380 V-660 V, 50-60 Hz, 3 Ph ( I E 3 ) Electric Cabinet Cooling System : Air Ventilation With Fan Kodshut Aaspfx Ahvoww Number Of Foot Pedal : One Label Group : Label Group English Packaging Method : Plastic Cover With Strech Flim Shipment Method : Standard

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping Kwsdpfondk N Aex Ahvew - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Kwsdpfxer H Havs Ahvew Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg