Used Fine Plasma for sale (2,469)

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Ibodox Ek Rdepfx Ahyjc Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. Ibjdez Hcr Dspfx Ahyec The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. Ijdpsq Nf Uwsfx Ahysbc 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Iedpfx Aozul N Rehyebc Interface 0-20 mA

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise Ibjdpfx Asy Nd Hyshyjc • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, functionality: fully functional, machine/vehicle number: 11.031.802, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material Iodpfx Ahjy U Uqteysbc No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Isdpfx Ajx Eg T Eehyebc

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Isdpfoy A Trljx Ahyjbc If you have any questions, please feel free to contact me.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Iodpfx Asx R Df Sshysbc Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Ibjdjx R Dh Hjpfx Ahyec Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Ibedpfjzcccrjx Ahyjc Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, HGG RPC 1200 CNC Robot Coping Line- Year 2017. 18 metres in feed and outfeed rollers. Staubli 6 axis robot. Kjellberg Fine Focus Plasma Unit. Ijdpfx Ahezrp T Isysbc Dust extraction. 1200mm Capacity.

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. Ibsdjz Sqpiepfx Ahyjc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible. Ibsdpfx Asz Da Rlshysc

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. Isdpfxoz Rivfe Ahyobc • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. Ibjdpfxjzn Hilo Ahyec If you have any questions or require further information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Ibodszizkyepfx Ahyjc Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings Ibjdpfjy Snwnox Ahysc - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Ibodpfjzdz U Uex Ahyec Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) Ibjdpfxjy Annbj Ahysc ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Iedpfx Asz Ni Hnohyebc Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp Iedpfoz A Uqqjx Ahyebc 300x150 cm including Viaduct software with Nitec Fiblo 4000 extraction system Inspection only by appointment! Collection only.

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Ibjdpfxjz Ixzks Ahyec

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Ibjdpfx Ahsz D Tq Esyoc Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: 70/060260, For sale: OTEC fine polishing machine - Model: DF 70 - Serial no.: 70/060260 - Year of manufacture: 2006 - Power: 2 kW Isdpfoz Iym Usx Ahyobc - Weight: 450 kg ADDITIONAL EQUIPMENT - Coolant tank - Automatic polishing paste dosing system - Printer (for reports) - 10 tool holders - 1 mixer holder For sale: a machine for the fine polishing of various metal parts following machining processes. It can also be used to clean heavily soiled or stubborn surfaces on parts made from various materials. The machine is fully automatic and features an additional coolant tank, which prevents the polishing media and the parts from overheating, allowing for continuous operation of 10 hours or more. Workpieces are polished by being fully or partially submerged in the polishing media, ensuring even contact across all surfaces, including the deepest and most hard-to-reach areas. The machine has seen very little use and has been regularly maintained. It is connected to the power supply and ready for immediate operation.