Used Plasma Tubes for sale (2,353)

Condition: ready for operation (used), Year of construction: 2008, Zinser 2325-N Working area: 3100 x 6050 mm Nksdpfxewwtzpj Ahvsw 1x straight oxy-fuel torch No filter unit included. Control upgraded in 2021. More information in the attached documents.

Condition: as good as new (ex-display), Year of construction: 2024, Tube Bender BB 48 without mandrel - model BB 48 - capacity up to 48 x 3,0 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 2,2 rpm - motor 1,5 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight ca. 200 kg Njdpfx Ajfp Al Uehvekw

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Nedpfouxc Rhox Ahvekw

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 6,090,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm Nsdpeyik Hcjfx Ahvskw -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: used, Year of construction: 2015, TUBE LASER CUTTING MACHINE, Model LT8, made by ADIGE This tube laser cutting machine is in excellent working condition. Manufactured in 2015, it has been meticulously maintained, ensuring optimal performance. Technical data: - Round profiles diameter: 20 - 220 mm - Square profiles: Max. 200x200 mm - Max length: 8500 mm - Max tube weight: 32 kg/m - Laser Source: CO2 - Laser Power: 3 kW - Lens holders for: 5 & 7.5 “ - Bundle loader & Loading module: with 5 arms - Tube length loading: 8500 mm - Cutting head: 3D Tilt head - Max tube length unloading: 8500 mm - Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm - Front unloading conveyor for short parts: Up to 500 mm Scope of supply: - TRUMPF TruLaser Tube 5000 - Tube LoadMaster - Bundle loader with 8.5 m step loader - Finished part 8.5 m collecting table - Chiller - Extractor Special features - Machine integration Rofin - Rear scrap conveyor Nedpfx Aoyma Itehvjkw - Capable for open profiles - Handling option for delicate tubes - High speed pierce boost - Weld seam detection - Artube modules second licenses + USB hardware key - CAD – CAM - Artube adv CAM features - Direct import steps / Iges files - Post Processor LT8 for Artube (1st license) - Production time and Cost calculation - Artube Service Contract Annual Fee - Advanced edit - Part viewer - Cut and fold library - Booster drilling process - Remote tele-diagnostic - Siemens 12 months full warranty - Auto focusing head - Protube Express off line nesting and scheduling - Protube Enterprise productivity & machine monitor - Whole nbar processing software - Pierce booster edge detection Round profiles diameter: 20 - 220 mm Square profiles: Max. 200x200 mm Max length: 8500 mm Max tube weight: 32 kg/m Laser Source: CO2 Laser Power: 3 kW Lens holders for: 5 & 7.5 “ Bundle loader & Loading module: with 5 arms Tube length loading: 8500 mm Cutting head: 3D Tilt head Max tube length unloading: 8500 mm Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm Front unloading conveyor for short parts: Up to 500 mm

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Nedpfsyma Hvjx Ahvskw Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel 4) Unloading bin Optional to be build new upon requirement : Nedpfx Ahoymaypsvekw 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Nkjdeymax Espfx Ahvsw Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Nsdeymaw Uopfx Ahvekw Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2019, condition: used, Automatic high-precision tube cutting machine TS72, made by ADIGE Cuts round, square, rectangular, and flat-oval tubes up to 102 mm in diameter. Nkodeymangjpfx Ahvew Efficient production: - Program up to 4 different cut lengths per tube - Continuous measurement changes for small batches Organized unloading: - Program up to 3 different unloading positions plus a scrap container. Non-Stop unmanned production: - Automatic production changes without tools. - High-capacity bundle loader holds up to 4000 kg of material. Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting - Independently operated hydraulic material clamps ensure precise clamping and high cut accuracy. - Blade and clamps detach during return movement to prevent wear. TECHINCAL DATA Working range - Round tube cutting: from 8 to 102 mm - Square tube cutting: from 10x10 to 80x80 mm - Bar cutting: Up to 40 mm - Cutting length: From 20 mm to 3.000 mm Loading - Loading from bundle: Fully automatic - Unloading positions: 3 + 1 (scrap) Tools - Cutting blade diameter: From 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: from 8 to 102 mm Square tube cutting: from 10x10 to 80x80 mm Bar cutting: Up to 40 mm Cutting length: From 20 mm to 3.000 mm Loading from bundle: Fully automatic Unloading positions: 3 + 1 (scrap) Cutting blade diameter: From 200 to 350 mm Total installed power: 20 kW

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR Nkedpfxjyl Upvs Ahvew · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : Nkedpfxeyl Ukao Ahvew 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm & Turk heads for squares and rectangular shapes Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Tube length: 4 - 8 m Speed: Up to 40 m/min

Condition: used, TUBE MILL 130 x 4.5 made VAI SEUTHE Manufacturers: - Mill: VAI (Austria) technology - HF Welder: ELOMAT - Packing Unit: Local Made Specifications: - Round tube diameter: 42 – 130 mm - Square tube diameter: 40x40 - 100x100 mm - Rectangular diameter: 60x30 - 80x120 mm - Thickness: 1 - 4,5 mm - Cutting length range: 4000 – 8.000 mm - Maximum production speed: 80 m/min Njdpfsyl Uipex Ahvjkw - Maximum accumulation speed: 200 m/min Scope of supply: - Coil Loading car - Single expandable decoiler - Feeding roll - Semi-Automatic shear and end welder - Horizontal accumulator with external ring with individually driven rolls - Forming section: 4 Break down + 3 Finpass stands - Welding section: 3-roll heavy duty welding stand - Double OD scarfind with hydraulic movement up/down - Cooling tunnel - Sizing section: 4 stands - Turk head section - Flying saw with precision +-1.5mm - HF welder 300 KW, made ELOMAT - AUTOMATIC PACKING UNIT with run out conveyor (approx. 24 meter) for tube up to 8 m - COMPLETE EMULSION PLANT including: Emulsion filtering units, heat exchanger, pumps, and all the necessary controls - Hydraulic, pneumatic and electrical units and connections - TOOLING & ACCESSORIES : Existing roll sets Round tube diameter: 42 – 130 mm Square tube diameter: 40x40 - 100x100 mm Rectangular diameter: 60x30 - 80x120 mm Thickness: 1 - 4,5 mm Cutting length range: 4.000 – 8.000 mm Maximum production speed: 80 m/min Maximum accumulation speed: 200 m/min

Condition: used, Tube mill OTO 101.3 Manufacturers: OTO MILLS, SEUTHE & THERMATOOL The line is in operation and inspection during production is possible. The line is complete with: - OTO MILLS Entry line with Double uncoiler, Strip joiner & Strip accumulator - CANTI-SAG Forming, Sizing line & Turks heads TWL RS90 - THERMATOOL HF welder CFI 300kW - SEUTHE Flying saw TS90 - ATTL Automatic packaging unit - ITIPACK Strapping unit - OSU Metallization Technical data: - Diameter range: 32 – 101 mm - Squares: 20 x 20 - 70 x 70 mm - Rectangular: 40 x 20 - 80 x 50 mm - Thickness: 0.8 – 3.0 mm - Tube Length: 4 – 10 m - Voltage: 380 / 50 VAC / Hz - Direction: Left - Right - Material: Carbon steel – Hot rolled, pickled, galvanised, cold rolled - Tensile: 330 – 520 N/mm2 - Coil Weight: 2x6.000 Kg - Coil Width: 50 – 250 mm - Coil ID: 508 – 610 mm - Coil OD: 1100 – 2000 mm Scope of supply: 1. Entry line OTO MILLS with Double uncoiler, Strip joiner & Strip accumulator 2. Forming, Sizing line & Turks heads 3. THERMATOOL 300kW welder 4. Fume exhaust system 5. Cooling tunnel 6. Detwister unit 7. Flying saw Seuthe 8. Roll way 9. Automatic packaging machine 10. Itipack strapping machine 11. Electrical System 12. Pneumatic System Nkodpoyl Uicefx Ahvow 13. Hydraulic Systems Tube diameter: 32 - 101 mm Squares: 20 x 20 - 70 x 70 mm Rectangular: 40 x 20 - 80 x 50 mm Thickness: 0,8 - 3,0 mm Tube Length: 4 – 10 m Direction: Left - Right Material: Carbon steel – Hot rolled, pickled, galvanized, cold rolled Tensile: 330 – 520 N/mm2 Coil Weight: 2x6.000 Kg Coil Width: 50 – 250 mm Coil ID: 508 – 610 mm Coil OD: 1100 – 2000 mm

Condition: used, High precision tube mill 38x2,7 SEUTHE / EFD / MAIR Technical specifications - Tube OD range: 11 – 38 mm - Wall thickness range: 0.7 – 2.7 mm - Maximum speed: 120 m/min Special features - Strip whashing tunnel: Cleaning tunnel to remove oils and dirt from strip - Cold rolling inline with Vollmer thickness control: Reduction of strip thickness from 0.03mm to 0.3mm - Reinforcement of FP3 for high tensile strength - Individual motorization in sizing stands - Carbide tungsten rolls - Ceramic rolls at welding stand - All contact parts are NON-MARKING SEUTHE / EFD / MAIR HF welded tube line 38x2,7 This premium-quality production line engineered for the manufacture of high-tolerance welded steel tubes with superior surface finish and dimensional accuracy. Designed to meet the most demanding requirements of the automotive, furniture, and high-quality tube manufacturing sectors, this line combines advanced forming technology, inline strip processing, and state-of-the-art automation. This tube mill is specifically developed to deliver exceptional roundness (up to 0.05 mm) and tight dimensional tolerances, producing finished tubes with tensile strength of up to 660 N/mm². The line incorporates a strip washing tunnel to eliminate oils and contaminants, ensuring optimal welding conditions and consistent surface quality. A key feature is the inline cold rolling unit with Vollmer thickness control, allowing precise strip thickness adjustment before forming. This system enables thickness reductions from 0.03 mm up to 0.3 mm, guaranteeing perfect thickness control and enhanced product consistency. Reinforced fin pass stands and individually motorized sizing stands (Siemens electrics, upgraded in 2024) ensure maximum stability, flexibility, and repeatability during production. The forming and welding section is equipped with an EFD Weldac HF welder (2019), carbide tungsten rolls, and ceramic welding rolls, with all contact parts designed to be non-marking, making the line ideal for visible and high-specification tubes. The sizing section and online inspection systems, delivers excellent roundness, and internal diameter tolerances (±0.08 mm). Nkodpfxjyl Uhlo Ahvjw Cutting operations are handled by a MAIR flying cut-off saw (2019) with CNC control and non-marking clamping jaws, enabling optimized cutting cycles and high productivity. The line also includes eddy current testing, demagnetization, defect marking, cleaning, and anti-rust oiling units, ensuring fully controlled quality output. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube OD range: 11 – 38 mm Wall thickness range: 0.7 – 2.7 mm Maximum speed: 120 m/min

Condition: used, High Precision Tube Mill SEUTHE / ABBEY / MAIR RS65 – 76.2 x 3.25 mm High-quality precision HF welded tube mill designed to manufacture tubes with excellent surface quality and tight dimensional tolerances, specifically engineered for demanding applications in automotive, furniture, and high-quality tube production. Technical specifications - Tube mill: High precision - Model: RS65 & MPS150/4/F - Tube OD range: 25 – 76.2 mm - Wall thickness range: 0.7 – 3.25 mm - HF welder: 250 kW - Maximum speed: 100 m/min Special features · Strip washing tunnel: cleaning tunnel to remove oils and dirt from strip · Inline cold rolling with Vollmer thickness control - Perfect thickness control of strip - Strip thickness reduction: 0.03 mm to 0.3 mm · Reinforced forming stands for high tensile strength · 6 sizing-reducing stands Nkedpjyl Ugbefx Ahvew · All contact parts are non-marking SEUTHE / ABBEY / MAIR HF welded tube line 76x3,25 mm Consistent tolerances and superior surface finish RS65 line integrates strip washing tunnel and inline cold rolling unit (Carl Wetzel KG) with Vollmer thickness control for precise strip management (0.03–0.3 mm reduction). ABBEY ETNA forming section features motorized breakdown stands, finpass stands, 250 kW HF welder, complete inside scarfing and triple OD scarfing, plus 6-stand sizing with individual motors. Inline Quality Control & Finishing Prüftechnik Eddycheck 610 eddy current testing, demagnetisation, defect marking, anti-rust oiling, and MAIR automatic magnetic packing system ensure production-ready output. High-Speed Cutting SEUTHE TS90 flying saw with linear OPTRONIC CNC control and non-marking jaws supports production speeds up to 100 m/min. Delivers consistent high-quality tubes with integrated thickness control and comprehensive inline testing—optimized for demanding industrial applications. Current status Offered in very good condition, currently connected and in production in Europe, this complete tube mill is an excellent opportunity for manufacturers seeking a high-end, turnkey solution for precision welded tube production. Tube diameter: 25 – 76.2 mm Thickness: 0.7 - 3.25 mm Maximum speed: 100 m/min Coil OD: 2100 mm Coil ID: 1100 mm HF welder: 250 kW Total installed power: Approx. 680 kVA

Condition: ready for operation (used), Consists of the following items: 6 tube bending machines 3 sheet metal rolling machines 1 punching machine 1 longitudinal welding machine (incomplete) The machines can produce the following diameters: M = Machine M1 – Ø70 M2 – Ø92 M3 – Ø105 M4 – Ø110, Ø125, Ø131, Ø135, Ø139, Ø150 M5 – Ø120 M6 – Ø180 Nkjdpfxjyia Ate Ahvsw M7 – Ø200

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Nodpfx Ajyh I Unshvekw Weight: Estimated: Kg 690.0

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Weight: Actual: Kg550.0 Dimensions: 650 X 3000 Nodsyh I Uhspfx Ahvekw

Condition: used, functionality: fully functional, Year of construction: 2016, degree of automation: automatic, laser power: 3,600 W, sheet thickness (max.): 10 mm, pipe diameter (max.): 254 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 4,500 kg, We are offering this used TRUMPF TruLaser Tube 7000 laser cutting machine, year of manufacture 2016. Resonator 3.6 kW 6.5 m loading + 6.5 m unloading, two conveyor tables for workpiece sorting Automatic profile magazine 4.5 tons + manual loading Bevel cutting up to 45 degrees Nkedoylvd Iopfx Ahvew Increased profile/pipe diameter up to 254 mm Max cutting thickness 10 mm Internal weld seam sensor External sensor (detects seamless pipes) If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine Nodjyllvyspfx Ahvekw · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. Nksdpfsx S Ux Eox Ahvow The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dragon 220 Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Can be seen working at our factory in Ireland

Condition: used, Year of construction: 2021, UltraSharp plasma cutting machine. The machine is fitted with the Burny cnc control ,fitted with a Lincoln Electric 170 amp high definition plasma cutting system including Inova automatic Nkodpfxeyli Hio Ahvow torch height control and UltraSharp cutting technology. It would be capable of a cutting area of 4,000mm x 2,000mm fitted with a sectional fume extraction table.

Condition: used, Year of construction: 2022, RUR2500P UltraSharp plasma cutting machine, complete with a Burny 10 icd plus CNC control and a Lincoln Electric Fineline 170 amp plasma cutting system including a nova automatic torch height control, 8m x 2m extraction table with a 8m x 2m cut tume extraction system Nkedpfx Aheylizyjvew

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Nodpfx Ahstmqi Dsvskw The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.