Used Planing Stop for sale (9,454)

Condition: used, for cutter heads max. 125 x 140 x 30 mm. Dodpfx Aelf I Dzoc Necc

Condition: used, Knife: Z3 Dcodpfolf I Dljx Ac Njc Knife type: Strip planer knife Available: 2 pcs 180 x 140 x 35 mm

Condition: used, for planer heads max. 125 x 180 x 35 mm. Dedpfolf I Dwsx Ac Nocc

Condition: used, Blade: Z4 145 x 120 x 35 mm. Dcjdpfxolf I Dao Ac Njc

Condition: used, Knife: Z4 - 220 x 180 x 80 mm Dsdpjlf I A Sofx Ac Njcc - Strip planer knife - Available: 3 units Price per unit: €390.00 + VAT

Condition: used, Blade: Z2 - 50 x 130 x 50 mm - Available: 2 units Dcjdpfx Acolf I A Dj Njc Price per piece: €50.00 + VAT

Condition: used, Blade: Z4 - 150 x 100 x 50 mm Dcedpfelf I Ayjx Ac Njc - One clamping bar is missing.

Condition: used, Knife: Z6 Dcedpfjlf I Avsx Ac Njc 260 x 163 x 50 mm.

Condition: used, Blade: Z12(6). 260 x 200 x 50 mm Dcedpfx Acolf I Ans Noc 6 clamping bars are missing.

Condition: good (used), functionality: fully functional, Planing width: 630 mm, 4-knife cutterhead, height: 210 mm Dsdpfsyhnatsx Ac Njcc

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately Dcodpfxoxb U Txe Ac Njc -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,600 h, functionality: unexamined, planing height: 240 mm, spindle diameter: 40 mm, planing width: 320 mm, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, surfacing fence height: 2,500 mm, 9 Ash: U-R-L-O-U-R-L-O-U Max. Planing Dimensions: 240x320mm Removed from operation in working condition (has since been dismantled) Serial no. 18A1869 FEM9-32XC / RHINO 800XL Feeler-series 9 FEELER series A. Capacity: (1) Working width: 18–320 mm (2) Working thickness: 6–160^230 mm (3) Min. working length: 240 mm (4) Feed speed: 7–36 m/min B. Motors: (1) 1st bottom horizontal spindle: 10^20 HP with outboard bearing (2) 2nd right vertical spindle: 10^15 HP with outboard bearing (3) 3rd left vertical spindle: 10^20 HP with outboard bearing (4) 4th top horizontal spindle: 10^20 HP with outboard bearing (5) 5th bottom horizontal spindle: 10^20 HP with outboard bearing (6) 6th right vertical spindle: 10^15 HP with outboard bearing (7) 7th left vertical horizontal spindle: 10^15 HP with outboard bearing (8) 8th top horizontal spindle: 10^20 HP with outboard bearing (9) 9th bottom horizontal spindle: 10^20 HP with outboard bearing (10) Feed drive: 15 HP (inverter) (11) Elevation: 2 HP C. Spindles: (1) Spindle diameter: 50 mm for 1st, 2nd, 3rd, 4th, and 9th spindles; 40 mm for 5th, 6th, 7th, and 8th spindles. (2) Spindle rotation speed: 6,200 rpm (3) Adjustment range of vertical spindles: 80 mm (4) Adjustment range of horizontal spindles: 35 mm D. Cutting circles: (1) 1st bottom horizontal spindle: 100–180 mm (2) Right vertical spindle: 110–250 mm (3) Left vertical spindle: 110–250 mm (4) 1st top horizontal spindle: 110–250 mm Dcodpfsyguf Hsx Ac Nec (5) 2nd bottom horizontal spindle: 110–250 mm (6) Right vertical spindle: 110–250 mm (7) Left vertical spindle: 110–250 mm (8) Top horizontal spindle: 110–250 mm (9) Bottom horizontal spindle: 110–250 mm E. Other specifications: (1) Dust extraction port diameter: 160 mm (2) Infeed table: 2–2.5 m (3) Feed roller diameter: 140 mm (4) With 50 mm cutterhead F. Standard equipment: (1) Feed speed digital display – DPRLF-40K (2) Automatic table lubrication system (3) Central lubrication – point-to-point type (4) Pneumatic chip breakers on top spindles (5) Pneumatic fence on left spindles (6) CE mark (7) Motor: IE3 efficiency class (7) Sequence: Bottom, Right, Left, Top, Bottom, Right, Left, Top, Bottom Options: OP014-15 Variable Feed Speed Controller – 15 HP Inverter OP001 Pneumatic Control for 1st and 2nd Elevation Infeed Roller OP041 Outboard Bearing for 2nd, 3rd, 6th & 7th spindles OP017 Digital Position Controller for 3rd, 4th, 7th & 8th spindles OP042C Improved sound enclosure OP023AE3-15 FEED Motor 15 HP (E3) OP023BE3-10-15 Motor 10^15 HP Spindle (Y/Δ) (E3) OPO08-5 Extension Table 2.5 m with stand and fence OP023BE3-10-20 Motor 10^20 HP Spindle (Y/Δ) (E3) OP002 Three-Mode Feed Roller Pneumatic Elevation OPO10-230 Extra Working Height 230 mm for 2nd, 3rd, 6th & 7th spindles OPO08A Air cushion table 320–400 mm

Condition: used, - Documentation available: No - CE certificate present: No - Table width: 340mm - Travel Z: 400mm - Max. stroke: 340mm - Travel Y: 340mm - Table length: 630mm - Travel X: 550mm - Min. stroke: 0mm - Throat depth: 600mm - Motor power: 3.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dedpjwnhqmjfx Ac Necc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,600 mm, total length: 2,500 mm, total height: 1,700 mm, Empty weight: 3.000 kg Price: On request Dodpfx Aswnicwsc Nocc - Documentation available: No - CE certificate present: No - Table width: 450mm - Travel Z: 300mm - Max. stroke: 700mm - Model: Horizontal - Travel Y: 1200mm - Table length: 700mm - Travel X: 800mm - Throat depth: 450mm - Model: Hydraulic - Control: Conventional - Motor power: 7.5kW - Transport dimensions: 2500mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, - For hydraulic tools at maximum clamping length, Dcsdpfxelkcdvj Ac Noc - Thread: M44x1.5, - Right-hand tightening. Price per unit: €60.00 + VAT. Available: 3 units.

Condition: new, 2000 mm Working width 400 mm Wheel width 400 mm height adjustment 750 - 1100 mm weight of the machine ca. 0,80 t dimensions 2,0 x 0,55 x 1,0 m Dsdpfx Acjwz Ruhj Njcc

Condition: new, 3000 mm Dodpjfv Attsfx Ac Nscc Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm Dcjdpfxoxdcyle Ac Njc The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Length: 400 – 12.000 mm

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW Dedeyatffspfx Ac Necc - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: excellent (used), Weinig Hydromat 17 BL planer with destacker Feed: 60 m/min Heads: 1. Lower - 11 kW 2. Right side - 7.5 kW 3. Left side - 7.5 kW 4. Upper - 11 kW 5. Lower - 7.5 kW 6. Upper - 7.5 kW 6 feed rollers in the table Feed motor - 15 kW Dcsdpfx Ajydlkhjc Nec Planing width - 170 mm Planing height - 120 mm Machine on an elevated platform Noblu Azev Euy Rjqajkt Loading included in the price. Excellent condition!

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Djdpfx Asvwflboc Nocc

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Dcjdpfevwgaaox Ac Njc

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Dsdpfjvwgh Rjx Ac Njcc Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Model: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Dcsdpew U Emdjfx Ac Njc Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Infeed and outfeed tables can be tilted - complete Slotted table lips Low-noise table lips Motorized automatic brake Number of knives: 4 pcs Safety cutter block Table roller: 1 Feed rate: 8 + 14 m/min Digital display for planing height Electric height adjustment Extraction port diameter: 140 mm Space requirement approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in its current condition as inspected, without warranty or guarantee

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Dcedpfx Acjvwd U Is Noc