Itec for sale

Your location was not identified (Edit)
Enter your address
or
Move
9

Machining centers (vertical) UNITECH VMC-1250P3

Kaiserslautern, GermanyGermany dealership location
18085 km
2005
ready for operation (used)
General Data Measurements width 3900 mm Measurements depth 2520 mm Measurements height 2850 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model SINUMERIK 810D Movement X-Axis Movement 1250 mm Y-Axis Movement 630 mm Z-Axis Movement 600 mm Workpiece Workpiece weight 1200 kg Be9idv7h03 Table Outer length 1370 mm Outer width 660 mm Media Main electronic connection 400V / 50Hz Power consumption 46 kW Chip conveyor Yes Internal cooling Yes This UNITECH VMC-1250P3 Vertical Machining Cente... more
8

- USED - 3-AXIS CNC LATHE TAI-TECH TT 30-1200

Matelica (MC), ItalyItaly dealership location
17814 km
2014
ready for operation (used)
MAX ROTATING DIAMETER: 612 mm MAX TURNING LENGTH: 1200 mm MAX TURNING DIAMETER: 500 mm BAR CAPACITY: 86 mm SPINDLE: 3200 rpm; 18,5-22 Kw; ASA 2-8 ; 254 mm X-AXIS TRAVEL: 300 mm Z-AXIS TRAVEL: 1250 mm RAPID FEEDS X-Z: 20 - 24 m/min DRIVEN TURRET HEAD: 12 POS; 4000 rpm; 3,7 Kw Nnhwr CONTROL UNIT: FANUC 0i-TD WEIGHT: 6000 Kg OVERALL DIMENSIONS: 3600 x 1800 x 1800 mm ACCESSORIES: SWARF CONVEYOR; ETHERNET PORT; PCMCIA SERIAL PORT; RS 232 SERIAL PORT; USB PORT NOTE: WITH No 2 AXIAL TOOLS, No 2 RAD... more
2
Make Jongerius Technology, New "unknown", Material Stainless steel, Horizontal conveyor screw , Trough-type , Diameter 150mm, Length +/- 2600mm, Between inlet and outlet +/- 2200mm, Shaft diameter 50mm, Pitch +/- 150mm, Inlet dia.150mm, Outlet dia.150mm, Motor 1,1 KW, 230/400 Volt, With covers , With switch , Floorspace 3,7x0,5 M, Total height 0,5 M, Weight 230 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for... more
6

5-axis CNC machining center UNITECH XV 620-5AX

Umkirch , GermanyGermany dealership location
18139 km
2017
good condition (used)
5-axis CNC machining center UNITECH XV 620-5AX The machine is like new, only ran about 100 h. Number of axes: 5 Travel X: 620 mm Travel Y: 520 mm Travel Z: 460 mm Speed spindle: 15,000 rpm Working feed range (infinitely variable): 1 ... 10,000 mm/min Rapid speed: 36 m/min max. table load (centre): 300 kg Number of T-slots: 5 Jvbttq Distance of T-slots: 100 mm Swivel round table: 650 mm Swivel range B: + 30° / - 120° Rotation altimeiate C: 360° min. distance spindle nose - t... more
8
Approx. 50 lfm shelf Meta used see pictures 50 cm depth present Negotiation price: € 3,100.00 net Offer consists of: Tcll3cia Approx. 50 lfm shelf, 2.5 m high, 50 cm deep, 200 kg load/compartment. Field width approx.100 cm 51 pcs. stint or frame, 250 cm , 50 cm deep, galvanized 300 pcs. shelves, 200 kg load/compartment, galvanized 17 St. Cross Associations for S... more
15

Screening machines Siebmaschine Binder Bivitec 19/60-2

NS Maastricht, NetherlandsNetherlands dealership location
18144 km
ready for operation (used)
Screening machine Binder Bivitec Type: KRLL/DD 1900-6 Screen area: 6000 x 1900 mm - 2 deckers Drive: Electric motor 22 kW Incl.: Steel construction. S8uffx2q more
1
Transfer line for marking cartons and blister boxes by means of hot stamping. Max. Embossing area 50 x 80 mm Operating pressure 4-7 bar Stamping temperature 250 ° Cperformance 200 cycles / min Szthkz0u Electrical 220 V 50 Hz 125 W more
8

Brushing Machine BM1250 TCG Unitech 1201_03

St. Aegidi, AustriaAustria
17699 km
2002
ready for operation (used)
4 brush units - K46, K60, K80, K120 Working width: 1250mm Passage height: 90mm Brush shaft diameter: 120mm Smr93vo3 Brush diameter: 220mm Drive per unit: 7.5 kW Feed rate: 1-14m / min 1 complete set of replacement brushes K46 / K60 / K80 / K120 Currently the brushes are not occupied laterally - left + right at 100mm more
5
approx. 6,2t availableMade in SwitzerlandManufacturer: Unitec AG Bewuw02kcz more
4

VERTICAL MACHINING CENTER TAITECH VN 86 RP

25032 Chiari, Province of Brescia, ItalyItaly
18042 km
ready for operation (used)
Stdlyg THE YEAR 2012 STROKES X,Y,Z: 800x610x600 MM DISTANCE SPINDLE TABLE 150-720 MM QUICK 36 M/MIN SPINDLE BT40 RPM OF 10,000 (OF THE 12,000) RPM TOOL MAGAZINE 30 PLACES FANUC CNC 18THE - MD BELT-TYPE CHIP HIGH PRESSURE MANDREL CENTER ADDUCTION N.2 ROTARY TABLES THE ROTARY JOINT FOR HYDRAULIC CLAMPING FIXTURES more


itec
daily

New machines via email!

Stay updated!
8
Approx. 25 lfm shelf Meta used see pictures 50 cm depth present Bargaining price: € 1,570.00 net Offer consists of: Approx. 25 lfm shelf, 2.5 m high, 50 cm deep, 200 kg load/compartment. Field width approx.100 cm 26 pcs. stint or frame, 250 cm , 50 cm deep, galvanized 150 pcs. shelves, 200 kg load/compartment, galvanized 9 St. Cross Associations for Stiffening. 6 le... more
5

Screening machines Binder Bivitec Sieb Maschine 10/50-1

NS Maastricht, NetherlandsNetherlands dealership location
18144 km
ready for operation (used)
Binder Bivitec printing machine Brand: Binder, type: Bivitec Screen surface: 5000 x 1000 mm - 1 Decker Be9cueywep Drive: Electric motor 15 kW Includes: Rubber springs. more
4
Bctwd7bhro Workpiece transport by plastic belt 1,65 m wide Usefull working width including the finishing of the sides: 1,30 m. Lacquer recuperation by scraper Dry filtering of the spraying mist 2 oscillating carriages, cross on the feed direction, each equiped with 4 spraying guns Kremlin ATX more
2
New unknown, Material Stainless steel, Piston filler (1x), Dosing ± 250/500/1000 Ml, Number of pistons: 1, Number of filling heads: 1, Pneumatically operated , With hopper (Capacity approx. 20 Ltr), Mounted on frame , With switch , Floorspace 1,2x0,6 M, Total height 2,0 M, Weight 100 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machine... more
5
Hydraulic clamshell bucket, hydraulic rotary gripper, clamshell bucket, hydraulic grab suitable for excavators Altas shovel width 300 mm Opening Wide 1600 mm complete with hydraulic rotary servo. Type: J.P.Sauer son EM 6 25 Recording bolt Ø 60 mm uptake interim measure 270 mm Xk2mnndvb Used condition but functional more
3
SIG Positec Berger Lahr Linearpositionierer LP-A + gripper unit, comprising: LP-A (X = 300/Z = 100), motor VRDM 3910/50 LWB, UCH 325V IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1, 24V, 22W, 6Nm, used very good condition, 100% functional, Belntcaanz more
4
The iTECH 501 Oscillating Edge Sander can be used in for getting a superb edge finish. the oscillation reduces marks and scratches free and helps to prolong belt life. The cast iron table combines with a simple rise and fall handle plus an angle adjustment allowing you to use the full area of sanding paper. Mitre fence and slot also included. Be3iyhgdo7 A rubber coated drive drum provides positive grip and maximum power transfer. The belt tensioning and tracking operations are a simple and qu... more
7
WEINIG window system Cones and slot machine UNITEC 10, Y.O.M. 1997 AB at swivel angle 75 - max 82 mm, workpiece length min 800 mm 70 - max 120 mm / workpiece length min 490 mm 60 - max 240 mm / workpiece length min 360 mm 90 - max 350 mm / workpiece length min 185 mm Be3zbo8tjs AH 35-100 mm Spindle arrangement: Downhill saw , 3 kW, speed 2800, spindle diameter 40 Tap and slot spindle tool clamping length 320 mm, adjustment axial 260 mm, motor 11 kW WEINIG Profilier - and milling ma... more
1
including many chuck claws and accesories Fwzxosn more
6

Tenoning machine WEINIG UNITEC 10

Klipphausen, GermanyGermany dealership location
17637 km
1996
used
Tenoning machine WEINIG UNITEC 10 Crosscut saws: 1 Vertical spindles: 1 Length of main spindle mm: 320 Spindle stroke total mm: 260 Spindle stroke stepless: Yes Spindle diameter mm: 50 Saw blade diameter mm: 400 Electronic length stop: Yes Stop length mm: 2.600 Bbpm2c3c32 Atelier window: Yes Continuously variable feed: Yes Feedrate max m/min: 25 Alignment laser: Yes Roller table feed: electro-motive Clamping system: pneumatic Spindle stroke: Yes Required space lxwxh: 3500x2300x2400 Operating st... more
1
Screening machine KRLL / DD 1900 x 6, with steel construction and chutes Double decker, screen area 11.5 m², Engine 22.0 KW, Mums88 Weight 9,000 kg, Inclination 15 ° more
3

Filter Device NITEC GMBH SYBLO 1M GF22

Leipzig, GermanyGermany dealership location
17699 km
1995
used
air flow rate: 2000 m³/h suction stud diamter: 185 mm drive power: 2,2 kW connection electric: 220/380 V S8ydthobv total power requirement: 2,2 kw weight of the machine approx.: 100 kg dimensions L x W x H: 700x630x1170 mm It is a wall device with dust filtering system. There is optional a welding hose with funnel on sale. on sale as is, without test [...] more
4

Ex demo iTECH FM400-3300 Cyclone Fine Dust Extract iTECH

Horsham, United KingdomUnited Kingdom dealership location
18469 km
2018
used
The iTECH FM400-3300 Mobile cyclone dust extractor is suitable for small to medium sized trade workshops and is supplied complete with remote control start / stop. Can connect to single or multiple machines using the included 3 port adaptor. Nice and quiet in operation Automatic filter cleaning for consistent airflow. A manometer gives a quick, visual indication of performance. The wheeled waste bin makes the task of waste disposal easier - balancer hoses allow you to use plastic bin liners for... more
3

Water pump Booster pump KSB MovitecVCF 15/10

Neuhäusel, GermanyGermany dealership location
18044 km
2012
good (used)
Foerder quantity:16.3 m3/h Foerderhoehe: 127.9m Speed: 2940 rpm Power: 11 KW 3uh9zglvs The pump is in very good condition,only test run.With operating instructions.Immediately available. more
5
Pig slaughtering system power approx. 200 PCs / h Pig Slaughteringmachine OSTEO. 200 pigs/h Site 26215 Wiefelstede / Germany The facility is been disassembled by a specialised company and can be built from this company again. (Special offer) consisting of: (1) 1 x Reitersitzretainer m. autom. Heart / brain stunning, Farbr. Banss, type LVR-8940L 2) 1 x discharge blood plate conveyor, Fabr. Banss, type EFB 4) 1 x plate conveyor type PB-1500 5) 2 x Abflamm / hygiene reverberatory furnac... more
6

Nesting machine WISSNER WITEC 6021

Klipphausen, GermanyGermany dealership location
17637 km
2006
used
Nesting machine WISSNER WITEC 6021 Mukwhg Working dimension X: 6.000 Working dimension Y: 2.150 Working dimension Z: 50 Number of routing spindles: 1 Main motor power kW: 12 Rotation speed max rpm: 36.000 Tool clamping system: HSK-F40 Tool changing positions: 10 Gantry machine: Moving gantry machine Machine table: Special execution Vacuum pump: Yes Capacity vacuum pump m³/h: 500 Suitable for nesting: Yes Special workpiece clamping system: for small workpieces Loading: vacuum lifter Outfeed: Con... more
14
Universal milling machine HECKERT UNITECH FW 400 built in 2007 in Germany. The milling machine has a strong milling spindle. The machine has automatic tool attachment. Characteristic data: - PLC controller: SIEMENS SIMATIC S7-300 - display with 3 axes readings: ACU-RITE - tool attachment: mechanical-electrical gearing - machine dimensions (length x width x height): 3500 x 3520 x 2160 mm - machine weight: 4990 kg Worktable : - dimensions: 400 x 1600 mm - maximum table load: 1500 kg ... more
3

2 motors for rotary DiTEC FACIL

Asbach-Bäumenheim, GermanyGermany
17901 km
as good as new (ex-display)
-1x left gate Nsbpyy3n -1x Right Gate -both engines are unused more
15
Scissor lift manufactured by Iteco, type IT 10122. Year of construction 2008. Operating hours 515 lt. Meter reading, max. Working height 12 m, platform height 10 m, drive via 24 V electric motor with integrated charger, wheelbase 1850 mm, wheel formula 4x2, overall dimensions in length x width x height 2520 x 1230 x 2390 mm, weight 2815 kg, basket load 450 kg, basket dimensions in x length Width x height 2250 (+1400) x 1050 x 1100 mm, platform mechanically extendable, basket and floor control, m... more
6
Meditec Raeesi Thyzel CLU 40 E laser with Control Panel, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bcs2dk8gsz more
4
Support grinding device, support grinder, support grinder, cylindrical direction -Grinding direction -380 V P78mhutd -Drive 1.6 / 1.15 kW -Speed 2800 / 1400 rpm -Dimensions 390/223/H240 mm -Weight 20 kg more
6

Outside profiling and moulding machine SCM PROFITECH

Klipphausen, GermanyGermany dealership location
17637 km
2013
used
Outside profiling and moulding machine SCM PROFITECH Number of moulding spindles: 3 Tool diameter max mm: 250 Workpiece thickness max mm: 130 Spindles left: 1 Main motor power kW: 11 Feedrate max m/min: 13 Continuously variable feed: Yes Horizontal spindle movement timed: Yes Backfeed device: Yes Bairt839jj Down-cut function: Yes Control: PC control Spindles horizontal: 5 Tool changer: Yes Tool changing positions: 18 Tool clamping system: HSK-85S CE-mark: Yes Weight kg: 16.400 Operating status:... more
2
To the helical window manufacturing ᐳ computer controlled! Original price approx. €50,000 Dnjm02px Manufacturer: Vinous, type: Unitec 10, workpiece width min-max mm: 30-220, workpiece length min max mm: 245-2600, workpiece height min max mm: 30-100 crosscut saw: Yes, diameter saw: 320, saw kW: 3, speed rpm: 2800, spindle vertical: Yes, total spindle stroke mm: 320, Spindle stroke: 3, speed rpm: 2800, horizontal angle adjustment: automatically, kW main motor: 7.5, infinitely variable feed: Y... more
9
Max Plattenmass intune x 1000 x 60 mm Fraesaggregat 4.5 kw Drill aggregate 12 vertical drill spindles + 8 horizontal drill spindles Bezmc3sy99 Space requirement 2525 x 1330 x 1560 mm Required extraction performance 750 m3/. Weight 1500 kg more
7
The machine consists of the darkened sweat enclosure And a white round table with 4 stations 3 stations for the Be or unloads A station for welding. Bezhqiqjat Panel Control BJ 2004 CE compliant more
6
Meditec ML 4000 laser with Control Panel, serial number according to the photo, used, normal wear, 100% functional, included with com. FotosACHTUNG: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Hjxnl7i8y more
4
HWACHEON HITECH 200A ,MADE IN KOREA , 8 INC CHUCK , 12 SERVO TURRET , FANUC OİTD Bepk2pgv0d more
3

Coolant Unit POSITECH DPT

Ladis, AustriaAustria dealership location
17958 km
2004
used
liter capacity l 2rgosq more
4
7914,275 vacuum chamber vacuum packaging device Sweat length: 460x10mm Chamber volume: 500x600x100° H)mm Air consumption: 6 Nl/s at 6ATM Grid connection: 220V/50Hz 1Kw The device is operated in clean rooms with stainless steel. It is designed to pack trays, pipes, ribbons and rolls from SMD. An air pressure pump (Venturi effect) ensures very low noise, vibration and heating. The end of emptying can be programmed, there is a control sensor in the tub. Beyhdeuot2 more
6

Scissor lift Iteco 12151

Sittard, NetherlandsNetherlands dealership location
18126 km
2007
used
Type of fuel: Electric Colour: Blue Field of application: Construction Empty weight: 4.400 kg Mast: scissor Lifting capacity: 300 kg Lift height: 1.280 cm Qlf28pdq Working height: 1.380 cm CE mark: yes EPA marked Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 Transport dimensions (LxWxH): 2.65 x 1.5 x 2.54 Latest inspection: 4 more
5

KBA PERFORMA 74-4 GRAFITEC DOBRUŠKA

Jedovnice, Czech RepublicCzech Republic
17462 km
2007
good condition (used)
KBA PERFORMA 74-4 Year 2007 Nmqan Guaranteed number of prints-44 million 1) remote control of colours and registers GRAFICONTROL 2) semi-automatic print plate clamping 3) TECHCON Denzitometer 4) dishwasher rubber and inking machine 5) Alcohol wetting 6) Technotrans-Combicontrol more
15

Injection moulding machines HI-TEC HDT 200

Trenčianske Stankovce, SlovakiaSlovakia dealership location
17384 km
ready for operation (used)
Srew diameter: 50 mm Injection pressure: 184 Mpa Theoretical shot volume: 431 cm3 Theoretical shot weight: 392 g Nozzle stroke: 350 mm Srew speed : 0-180 r.p.m. Clamping force: 2000 kN Space between tie bars: 480 mm Mould plate stroke (max) : 450 mm Ejector force: 45 kN L33cqcga Stroke: 140 mm more
5

Coolant Unit POSITECH XBF 500

Ladis, AustriaAustria dealership location
17958 km
2000
used
liter capacity l ----- CAPACITY, RATING - volumetric flow rate 400 l/min - feed pressure 3.5 bar - tank volume 4300 ltr DIMENSIONS / WEIGHTS - space requirements -left/right- 4800 mm - space requirements -front/back- 1800 mm - total height 1950 mm DIMENSIONS / WEIGHTS - total weight approx. 1500 kg Ptyboy more
15
4-axis X: 6010 mm Y: 2010 mm Z: 450 mm A-axis: +/-90 ° Forward speed: 25 m / min Rapid traverse rate: 25 m / min Table size: 6010 x 2010 mm Vacuum table: 12 sectors 1000 x 1000 mm Vacuum pump: Bush RA02555 D503 DIJZ 2 PCs Speed range: 30,000 rpm Spindle retainer: HSK F63 Spindle drive: 15 kW Spindle Reckerth: MSPF150/150 * 380, 30/15/FBP/HSK F63 Tool changers: 18 fold Tool length scanning Control: HSC-6000 (Beckhoff TwinCat) Ldlgjfml Manual control unit 3D infrared touch pro... more
10
x-travel 1524 mm y-travel 660 mm z-travel 635 mm CNC-control Sinumerik 810D Shopmill table-size 1624 x 660 mm max. table load 1350 kg spindle taper BT-40 spindle turning speed range 8000 U/min Nlpit feed stepless 12000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 16,4 kW tool change unit 32 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 46 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 3,97 x 2,52 x 2,85 m chip conveyor ca. 4,90 x 1,50 x 1,40... more
6

Scissor lift Iteco 12122

Sittard, NetherlandsNetherlands dealership location
18126 km
2006
used
Type of fuel: Electric Field of application: Construction Empty weight: 3.315 kg Mast: scissor Lifting capacity: 350 kg Working height: 1.390 cm CE mark: yes Technical condition: very good EPA marked Lg8diye Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 more
5
Cooling water pump, submersible pump, coolant pump, centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump -Drive 0.55 kw 2850 U/min -unfortunately no technical data can be seen Dimensions 600/320/H560 mm Bdcjdc7tul -Weight 40 kg more
4
Mimitec winder offered. Eqb7hid Type: 020 Diameter: 200 cm Dimensions: 315x200x260 cm (LxWxH) Power: 380 V For more information call us or send an e-mail. more


itec
daily

New machines via email!

Stay updated!

to

to

Edit search
ITEC
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.