Used Pigs for sale (31)

Condition: new, Year of construction: 2026, operating hours: 306,311 h, machine/vehicle number: SČO2000, The machine is intended for scalding and dehairing of bristles from pigs. Time needed for scalding and deharing: 3 minutes Compact, stable machine housing made from Stainless steel Controls and ejector arm on the left Njdpepuy Agsfx Ahvocp Electric heating Pigled and Big Pigs versions available On the models 2000 and 2200, water outlet on bouth sides of the machine On the model 1100 , water outlet on the right side of the machine On the front of all machines, an opening for bristle removal. Dimensions: 2570 x 1040 x 1340 mm, weight:725 kg, 14,2 kW,400V For Pigs up to 2000 mm long and weighing up to 280 kg, Tyo SČO 2200 for Pigs up to 2200 mm long and weighing up to 350 kg.

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany Ncodpfx Ahsh Db Hcovjp The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: used, Pig dehairing machine Rothman Njdpfxjn Nxxzo Ahvscp Dimensions: 230x120x135cm

Condition: used, Pig dehairing machine Ncsdon Nxxpjpfx Ahvsp Baumann Dimensions: 240x100x145cm

Condition: ready for operation (used), functionality: fully functional, Ready slaughterhouse Complete slaughter line – the system integrates specialized machines at every stage – from animal reception and stunning, through scalding and organ removal, to final cutting, cooling, and packaging. The modular design ensures scalability, allowing for expansion or configuration adjustments as production needs evolve. Thanks to advanced automation and ergonomic solutions, the line minimizes manual labor while improving operator safety and work efficiency. This turnkey solution has been designed for reliable, high-performance operation in compliance with EU regulations, making it an ideal investment for modern meat processing plants.Wydajność linii: Line capacity: 80–120 pigs per hour Scalability: thanks to independent subsystems and automation The line includes the following elements: 1. Animal Receiving and Handling Location: animal scales, Office vestibule, Livestock Separation Equipment: Animal scales – accurate weighing of livestock (capacity: up to 120 pcs/hour) Hand and apron disinfection washers – ensure staff safety 2. Stunning and Bleeding Location: Loop washer, Unit feeder, Equipment: Electric stunner for pigs Bleeding conveyor Trays for blood collection Loop washer with lowering mechanism – capacity: 100-120 pcs/h 3. Parboiling and scalding Location: Parboiling and bristling Equipment: Parboiling tub Brushing machine (star) Automatic positioning system – 80-120 pcs/h 4. Preliminary Dissection and Evacuation of Organs Location: Intestine Separator, Stomach Emptying Table Equipment: Intestine and gastric cleansing lines Gastric centrifuge Blowing system – up to 120 pcs/hour 5. Dissection Proper Location: Dissection Equipment: Upper cutting line Inspector platforms Carcass conveyor Quality marking stations Aprons, disinfection equipment 6. Cooling and Separation Nodpfswu U Irox Ahvocp Location: Separation cooler Equipment: Hanger system Overhead carts Palletizing and final weighing area 7. Cleaning, Waste and Packaging Location: Packaging and Waste area Equipment: Material separator Tray packer Pallet wrapper Advantages of complete pork slaughter line: Our complete pig slaughter line is designed to process up to 120 pigs per hour with optimal hygiene and efficiency. Each processing stage -from stunning to final packaging- is fully equipped with specialized machinery tailored to industry standards. The modular system allows for scalable expansion, enabling you to adapt production to your facility’s growth. Automation and ergonomic design minimize manual labor while maximizing throughput and operator safety. High-precision equipment ensures accurate weighing, clean cuts, and reliable internal organ handling. Multiple sanitation points and tool sterilization stations guarantee food safety and compliance with EU norms. This turnkey solution integrates cutting-edge technology to streamline meat processing from live animal intake to cold storage.

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: GoTx1900/2600FX, The GoTx® 192FX/190FX/260FX are powerful fixation units for pigment inks. Designed to run with the GoTx® 2190/2260 printers for seamless productivity. Utilising quad zone heater element plates below and above the media horizontally where the fabric is not touched during cure. For consistency we do not employ IR heatlamps to avoid cool cure zones across the media. Fixation on a horizontal path provides better control and avoids smoke, steam or oil which can be dragged across the media = ghost free imaging. Up to 60 linear meters per hour output, with variable top, bottom radial axial fans for steam removal The GoTx® fixation modules are designed for uninterrupted production and media is NOT touched during transfer fixation process. Nedpfx Ajv Dcc Rehvecp

Year of construction: 2008, condition: good (used), Built in 2008 - Type of strapping: single, double, cross - max speed for single strap: up to 40 bundles/min - min bundle dimensions (w x l): ~100 x 100 mm - max bundle dimensions (w x l): ~600 x 600 mm - min bundle (package) height: ~50 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~30 kg - Infeed / outfeed (conveying) height: ~760-890 mm - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: ~200 mm - Strap coil dispenser - core width: ~190 mm Nsdpfxeh Nxude Ahvjcp - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~600 mm - Over all width equipment: ~970 - Over all height equipment: ~1600 mm - Input Power: ~1kW - Weight: ~200 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic strapping machine. Stand-alone strapper with manual loading of bundles/packages.Foot pedal for strapping cycle start. Moveable, mounted on wheels.

Condition: excellent (used), -Dimensions: 430x730x1565 mm -With pump -Hourly output: 40 L -Flavor: 1 -Voltage: 380 V / 50 Hz -Power: 1.6 kW -Condenser: air or water -Manufacture date: 17/7/2002 -Quality 828 Ncedpfx Ahswxu Slovjp -Serial number: IC 5879 -Software version: AESMD 36 -Net weight: 200 kg

Condition: used, For sale: Carpigiani K3/E ice cream machine. This is a combined machine for producing shakes and ice cream. The machine is designed for high production volume and features two independent freezing units, allowing one side to operate separately while the other can be switched off for maintenance or cleaning. Voltage: 400 V. Power: 4.8 kW. Multiple units available. Price listed is per unit. Ncjdpeyn Dduofx Ahvjp

Condition: used, Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 8945646465, total width: 2,000 mm, total length: 12,000 mm, total height: 1,800 mm, overall weight: 3,500 kg, air demand: 1 m³/h, Digital textile printing machine, pigments inks, GOTS and Oekotex 100, class baby articles, printing width 1.80m Technical specifications - Ink type: Kornit NeoPigment™ Intenso, water-based - Color channels: 7 (CMYK + Red, Green, Grey) Ncodpfxsw Tynmo Ahvsp - Pre-treatment: integrated 8th channel - Print heads: 64x Spectra Polaris (recirculating) - Print width: up to 180 cm - Print speed: up to 200 m²/h - Print resolution: 400–1200 dpi (recommended 600 x 600 dpi, 6-pass, interlaced) - Ink capacity: 4 liters per color - Weight: approx. 3,500 kg - Power supply: 3-phase, 25 kW, 110/220 V, 50/60 Hz

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Nodpfxexvmtts Ahvocp Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Condition: new, POS 1 Dry pigment titat white rutile R660 Sachtleben stored dry in 25 kg bags. Ideal for artist paints and coatings for reasons of transport costs if possible min 100 Kg Smaller quantities possibly after consultation Total quantity available: 625 Kg Other dry pigments: Zinc white / 625 Kg zinc white from ZnO EPM Manufacturer:Umicore Nederland B.V. Ocre jauen 2022 ( yellow ochre N°2022 ) 175 kg Manufacturer Le Moulin à Couleurs FRANCE Ombe naturelle 1066 ( Umbra naturelle N°1066 ) 175 kg Manufacturer Le Moulin à Couleurs FRANCE Ombre naturelle 1380 ( Umbra nature dark N°1380 ) 500 kg Manufacturer Le Moulin à Couleurs FRANCE umbra calcine 4 x 25 Kg = 100 KG Umbre calcine E 1102 Ncsdpefgrgpofx Ahvep Manufacturer Le Moulin à Couleurs FRANCE Chalk Chalk / North White Vereiningte Kreidewerke Dammann KG

Condition: good (used), functionality: fully functional, Slaughter line for pigs, cattle, and sheep The system is designed for 60–120 pigs per hour Cattle: 10–20 head per hour Equipment: 1x scalding & dehairing machine Penning 2 x work platforms Shaving table All lifts Nodpfx Ajynwmishvocp Cattle restrainer, cattle trap Hide puller Stunning tongs with transformer Hooks The price is for self-dismantling

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 1,380 mm, overall weight: 80 kg, empty load weight: 80 kg, operation weight: 80 kg, High-quality wall-mounted (gable) fans with dimensions of 1380 x 1380 x 450 mm and a capacity of 44,500 m³. Motor power: 1.1 kW, 3-phase. This exhaust fan is suitable for industrial or agricultural applications and is often used in pig farms, poultry houses, greenhouses, or production halls. • The unit provides effective ventilation by removing stale air, excess moisture, and unpleasant odors. • It is a push-pull fan, operating in both exhaust and intake modes. • The galvanized sheet metal and protective mesh construction ensure durability and safe operation. Njdpfx Asxuvatohvocp • The large blade diameter and powerful motor enable high airflow efficiency.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a fully procured, modular GMP process system for the production of C1-Esterase Inhibitor (C1-INH) from human plasma. Ncedpfoym Ayfex Ahvep The plant was professionally engineered, procured, and has successfully completed FAT, but has never been installed or put into operation. This is expressly not a used line, but a factory-new project and module package. Year of manufacture: 2020 Condition: brand new, in original packaging Operating hours: 0 Storage: temperature-controlled warehouse SCOPE OF SUPPLY (EXCERPT WITH QUANTITIES) Adsorption / Chromatography (Bay 2 & 3): - 2 adsorption lines (DEAE / QAE) - 2 buffer tanks - 2 pigging systems - 2 cooled transfer lines (pipe-in-pipe) - 4 filter press racks - 4 cooling cascades - 4 CIP loops Precipitation PRE: - 3 pre-precipitation tanks (incl. 1,000 L) - 3 main precipitation tanks - 3 CIP stations - 3 multi-layer filters - 1 vacuum station Buffer Preparation (Bay 2 & 3): - 6 buffer vessels (NaCl, DEAE, QAE buffer) - 6 temperature control skids - 4 media/WFI/CIP distribution units LEP 2.3 – Washing & Elution Solutions: - 2 washing solution tanks (up to 9,000 L) - 2 elution solution tanks - 4 temperature control units LEP 13 – Ammonium Sulfate System: - 1 preparation tank (3,500 L) - 2 storage/distribution tanks - Solid material crusher - Dosing & neutralization system - Heat-traced pipes Media Distribution: - 1 pharmaceutical NaOH 1M system - 1 technical NaOH 32% system - 1 acetic acid 60% system - Pump and dosing stations Additional Process Tanks: - >15 stainless steel tanks 316L (1,000–9,000 L) - Various skids, distribution and instrumentation units GMP & DOCUMENTATION - URS / requirement specifications per LEP - P&ID diagrams - Layout and sectional drawings - EMSR & instrumentation documentation - FAT documentation - Complete weld certification (digital) - Extensive photo documentation The project documentation is fully available both digitally and additionally physically archived, structured in 316 folders. Process control system connection with pre-configured MES interface is foreseen. Cleanroom integration according to specification. SALE Preferably as a complete system. Modular sale possible if the entire package is not sold. Suitable for plasma fractionators, biopharma manufacturers, CDMOs, or new site establishment projects. Availability: short notice Inspection: by appointment Price: on request

Condition: new, empty load weight: 971 kg, maximum load weight: 1,729 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.3 m³, color: grey, construction height: 2,560 mm, working width: 2,260 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2700K RAMP/ DOOR COMB I DRIVING GRID 350X170X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT 2700K - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (L x W x H): 350 x 170 x 190 cm - Exterior dimensions (L x W x H): 516 x 226 x 256 cm - Floor loading height: 51 cm - Perm. Total weight: 2,700 kg - Unladen weight: 971 kg - Payload: 1,729 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals: 8 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: aluminium chequer plate mudguards - Standing area: 5.95 m - Double deck:No - Driving gate: Yes - Cross partition inside: Optionally available - Window:Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, checker plate covered and tread strips - Interior light: Yes - Rear lighting:Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear marker lights - Plug for lighting: 13-pin - Vehicle documents:COC papers DESCRIPTION: - Aluminum checker plate tub edged, welded on screen-printed wooden floor - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - ventilation opening at the front - 2 side struts for additional stability - ventilation opening 2x pair, on the left and right side, barred from the inside - rear portal, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at rear with switch - tarpaulin completely closed at rear over tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated step strips - 1400 mm drive grid, rear, aluminium swivelling - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - automatic reverse drive. plug - reversing lights - large dimensioned safety lighting - integrated rear fog light - rear lane departure lights - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - drive grille - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vl Ncjdpfx Ahju Ht Awevop

Condition: new, empty load weight: 852 kg, maximum load weight: 1,148 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,600 mm, loading space height: 1,900 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,470 mm, working width: 2,050 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2000 RAMP/ DOOR COMBI 320X160X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG BOXENSTANGE TECHNICAL DATA: - Make: Vezeko - Model: VT 2000 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 320 x 160 x 190 cm - External dimensions (L x W x H): 464 x 205 x 247 cm - Floor loading height: 51 cm - Perm. Total weight: 2,000 kg - Unladen weight: 852 kg - Payload: 1,148 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: steel mudguards - Standing area:5.1 m - Double deck:No - Driving gate: Optionally available - Cross partition inside: Optionally available - Window:Sliding side window, barred - Front exit:No - Rear door / hatch material: aluminum, rubber-covered and kick strips - Interior light: Optional, can be retrofitted - Rear lighting:Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear track marker lights - Plug for lighting: 13-pin - Vehicle documents:COC papers DESCRIPTION: - Folded aluminum checker plate tub, welded to screen-printed wooden floor - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - ventilation opening in tarpaulin can be rolled up at the front - 2 side struts for additional stability - ventilation opening one pair, rear portal, continuously welded, hot-dip galvanized in solid design - rear flap with flap - door combination - rubber mat on the loading flap with integrated step strips - box bar can be removed from the rear flap - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving license - ALKO parking brake and parking brake - rear brake - rear parking brake. plug - reversing lights - large safety lights - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle - accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN Ncodpfx Aou Htzmjhvep

Condition: new, empty load weight: 875 kg, maximum load weight: 1,825 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,600 mm, loading space height: 1,900 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,470 mm, working width: 2,050 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2700 ALU FLOOR ALU ROOF RAMP/ DOOR COMBI 320X160X190CM VIEHANHÄNGER RAMPENGUMMI 2XLÜFTUNG BOXST INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT 2700 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 320 x 160 x 190 cm - External dimensions (L x W x H): 464 x 205 x 247 cm - Floor loading height: 51 cm - Perm. Total weight: 2,700 kg - Unladen weight: 875 kg - Payload: 1,825 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium floor - Walls material: Double-walled anodized aluminium - Roof material: Aluminium roof - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Fenders: Aluminium chequer plate fenders - Standing area: 5.1 m - Double deck: No - Driving gate: Optionally available - Internal cross divider: Optionally available - Windows: Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and kick strips - Interior light: Yes, rear - Rear lighting: Incandescent, lamps recessed in side struts - Side lighting: Rear track keeping lights - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION: - Aluminum checker plate tub edged, welded on solid aluminum floor (no more wood in the trailer) - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross beams therefore high point load - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - entrance door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - 2 side struts for additional stability - 2x pair, ventilation opening, left and right side, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at the rear with switch - tarpaulin completely closed at the rear over tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated tread strips - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - reversing license - ALKO parking brake - parking brake - parking brake - parking brake. plug - reversing lights - large safety lighting - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle - accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - 140cm high, easily removable rear safety grille - transverse separation - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - worksh Nsdpju Ht Akjfx Ahvscp

Condition: new, empty load weight: 554 kg, maximum load weight: 746 kg, overall weight: 1,300 kg, loading space length: 2,480 mm, loading space width: 1,260 mm, loading space height: 1,600 mm, loading space volume: 5.2 m³, color: grey, construction height: 2,250 mm, working width: 1,790 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT MINI 13.25 ALU RAMP/ DOOR COMB I DRIVING GRID 248X126X160CM VIEHANHÄNGER RAMPENGUMMI INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT MINI 13.25 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 248 x 126 x 160 cm - External dimensions (LxWxH): 407 x 179 x 225 cm - Loading height of floor: 51 cm - Perm. Total weight: 1,300 kg - Unladen weight: 554 kg - Payload: 746 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 1 - Floor: Aluminum checker plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminum - Roof material: Tarpaulin - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Steel mudguards - Standing area: 3.1 m - Double deck: No - Driving gate: Yes - Internal cross partition: Optionally available - Windows: Optional ventilation flaps - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and tread strips - Interior light: Yes, rear - Rear lighting: Incandescent - Side lighting: Rear track lights - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION: - Aluminum checker plate tub, folded, welded on screen-printed wooden floor - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. Frame completely hot-dip galvanized - Many cross members for high point loading - Anodized aluminium walls, double-walled 25 mm - Tie-down option with bar and 3 tie-down rings - Access door on the right in the direction of travel with robust angle lever lock - Solid, hot-dip galvanized, welded tarpaulin frame - Ventilation opening in tarpaulin can be rolled up at the front - Rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at the rear with switch - tarpaulin completely closed at the rear via tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated tread strips - drive grid 1000mm, rear, aluminium swivelling - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - ALKO parking brake - parking brake - parking brake - parking brake. plug - reversing lights - large safety lights - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle - accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN G Njdpfx Aeu Hrt Ushvjcp

Condition: new, empty load weight: 875 kg, maximum load weight: 1,825 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,600 mm, loading space height: 1,900 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,470 mm, working width: 2,050 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2700 K ALU RAMP/ DOOR COMBI 320X160X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG TREIBGITTER INNENLECHTTE TECHNICAL DATA: - Make: Vezeko - Model: VT 2700 K - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 350 x 170 x 190 cm - External dimensions (L x W x H): 464 x 205 x 247 cm - Floor loading height: 51 cm - Perm. Total weight: 2,700 kg - Unladen weight: 875 kg - Payload: 1,825 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals: 8 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Fenders: Steel fenders - Standing area: 5.95 m - Double deck: No - Driving gate: Yes, 140cm high - Cross partition inside: Optionally available - Windows: Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and kick strips - Interior light: Yes, incl. Rear lighting: Incandescent bulbs, lamps recessed in side struts - Side lighting: Rear marker lights - Plug for lighting: 13-pin - Vehicle documents: COC documents DESCRIPTION: - Folded aluminum checker plate tub, welded to screen-printed wooden floor - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available Frame completely hot-dip galvanized - Many cross members for high point loading - Anodized aluminium walls, double-walled 25 mm - Tie-down option with bar and 3 tie-down rings - Access door on the right in the direction of travel with 2 robust angle lever locks - Solid, hot-dip galvanized, welded tarpaulin frame - Ventilation opening in tarpaulin can be rolled up at the front - 2 side struts for additional stability - Ventilation opening 2x pair, on the left and right side, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at the rear with switch - tarpaulin completely closed at the rear via tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated tread strips - rear drift grid, 140 cm high, easily removable - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return ticket for the trailer. plug - reversing lights - large safety lights - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle - accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - transverse separation - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko Nedpfx Ahsu Ht Aqovecp

Condition: new, empty load weight: 1,178 kg, maximum load weight: 2,322 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 12.9 m³, color: grey, construction height: 2,600 mm, working width: 2,240 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 3500 RAMP/ DOOR COMBI I DRIVE GRID CROSS WALL 400X170X190CM VIEHANHÄNGER RAMPENGUMMI 3XLÜFTUNG INNENLEUCHTE TECHNICAL DATA: - Make: Vezeko - Model: VT 3500 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 400 x 170 x 190 cm - External dimensions (L x W x H): 572 x 224 x 260 cm - Floor loading height: 51 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,178 kg - Payload: 2,322 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles:-2 - Floor: Aluminium chequer plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminium - Roof material: Tarpaulin - Number of animals:2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Fenders: aluminium chequer plate fenders - Standing area: 6.8 m - Double deck:No - Driving gate: Yes - Cross partition inside: Yes - Windows:Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and tread strips - Interior light: Yes, rear - Rear lighting: Incandescent, lamps recessed in side struts - Side lighting: Rear track lights - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION: - Aluminum checker plate tub edged, welded on screen-printed wooden floor - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized welded tarpaulin frame - ventilation opening at the front - 2 side struts for additional stability - one pair of ventilation openings on the left and right sides, barred from the inside - rear portal, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - interior light at the rear with switch - tarpaulin completely closed at the rear over tailgate, with tensioning rubbers - non-slip rubber on the loading flap with integrated tread strips - 1400mm drive grid, rear, aluminium swivelling - 1400mm cross partition wall, aluminium, infinitely adjustable - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence from ALKO. plug - reversing lights - large dimensioned safety lighting - integrated rear fog light - rear lane departure warning lights - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - reversing lights - dust box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vl Ncsdpfx Ahsu Ht A Djvep

Condition: new, empty load weight: 871 kg, maximum load weight: 1,829 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,600 mm, loading space height: 1,900 mm, loading space volume: 9.7 m³, color: grey, construction height: 2,470 mm, working width: 2,050 mm, Hydraulics, automatic reverse, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * VEZEKO VT 2700 ALU RAMP/ DOOR COMBI 320X160X190CM VIEHANHÄNGER RAMPENGUMMI LÜFTUNG BOXENSTANGE TECHNICAL DATA: - Make: Vezeko - Model: VT 2700 - Vehicle type: Livestock trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 160 x 190 cm - External dimensions (LxWxH): 464 x 205 x 247 cm - Floor loading height: 51 cm - Perm. Total weight: 2,700 kg - Unladen weight: 871 kg - Payload: 1,829 kg - Chassis: Low loader (wheels next to the body) - Tires: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Aluminum checker plate trough on wooden multiplex plate - Walls material: Double-walled anodized aluminum - Roof material: Tarpaulin - Number of animals: 2 - Suitable for livestock types: Sheep, goats, small cattle, large cattle, calves, pigs - Overrun device/brake: ALKO - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Fenders: Steel fenders - Standing area: 5.1 m - Double deck: No - Driving gate: Optionally available - Cross partition inside: Optionally available - Windows: Sliding side window, barred - Front exit: No - Rear door / hatch material: Aluminum, rubber-covered and kick strips - Interior light: Optional, can be retrofitted - Rear lighting: Incandescent, lamps recessed in side struts - Side lighting: Rear track lights - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION: - Folded aluminum checker plate tub, welded to screen-printed wooden floor - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross members for high point loading - anodized aluminium walls, double-walled 25 mm - tie-down option, with bar and 3 tie-down rings - access door on the right in the direction of travel with 2 robust angle lever locks - solid, hot-dip galvanized, welded tarpaulin frame - ventilation opening in tarpaulin can be rolled up at the front - 2 side struts for additional stability - one pair of ventilation openings, rear portal, continuously welded, hot-dip galvanized in solid design - tailgate with flap - door combination - non-slip rubber on the loading flap with integrated tread strips - box bar can be removed from the rear flap - maintenance-free rubber spring axle from ALKO - automatic reverse drive - ALKO overrun device and parking brake - 13-pin plug - return driving licence - ALKO parking brake - parking brake - parking brake - parking brake - parking brake. plug - reversing lights - large dimensioned safety lighting - integrated rear fog light - rear lane departure lights - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/H approval with wheel shock absorber - drive grille - transverse separation - interior light - reversing lights - storage box New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! A Njdeu Hrufspfx Ahvjcp

Condition: new, Year of construction: 2024, functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Ncodpfx Aer Ihziehvop Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: good (used), The 7025 Rodent Ventilator is a positive pressure pump (according to Starling's Ventilator method), designed for use with guinea pigs, rats, mice and small birds. Nedpfx Ajh N D Ilshvocp The 7025 drive consists of a variable speed geared motor linked by a novel variable stroke mechanism to easily interchangeable cylinder/piston assemblies. Their precisely regulated geared-motor speed is controlled by an electronic feedback-controlled drive, thus providing the most accurate and reliable stroke rate control of any respirator available. Electronic noise broadcasting is negligible, and the pumps are also quiet to the ear. The unique linkage mechanism insures that: the piston almost touches the cylinder end with each stroke, regardless of the pre-set volume, thus insuring all air taken into the pump is expelled with each stroke. The volume, clearly indicated on a stationary dial, is adjustable by means of a knob while the pumpis either running or at standstill. The reciprocating motion is generated, adjusted and transmitted to the piston by rods and articulatedjoints only. The lack of sliding friction leads to: practically no wear and no backlash, hence silent operation and exact stroke reproducibility. The 7025 can be equipped with 5, 10 or 30ml cylinder/piston assembly. The operation of the ventilator may be "paused" by an external TTL logic signal (optional feature). Synchronised START/STOP feature available as optional (series 7125). The picture features a Rodent Ventilator 7025, together with the 6025 for Cat/Rabbit Good working condition. Please check out our other listings as well.

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. Nedpfxofmqq Ej Ahvecp . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear