Used Pfauter P 900 for sale (53)

Condition: good (used), Year of construction: 1997, operating hours: 69,758 h, functionality: fully functional, machine/vehicle number: 912612, overall weight: 7,000 kg, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, Gleason Pfauter GH125 The machine is in good working condition. Documentation, operating manual, and circuit diagrams are available. Maximum gear diameter: 125 mm Total power requirement: 34 kW Machine weight: approx. 6.9 t Space requirements: approx. 3.3 x 2.1 x 2.5 m Maximum module: 3.5 Maximum helix angle correction: +/- 45° Swivel movement: 220° total (-180° / +40°) Distance from work spindle to tailstock/table: 252 – 473 mm (9.92" – 18.62") Maximum cutter diameter: 115 mm (4.52") Maximum hobbing cutter length: 215 mm (8.46") Tedpfjxr Dqbjx Ab Dod Tangential slide adjustment (hob shift): 200 mm (7.87") Cutter speeds: 150 – 2000 rpm Workpiece spindle speed: 5 – 150 rpm The machine is sold without any warranty.

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: Todpfxjvi Nino Ab Dod -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides *

Condition: ready for operation (used), Year of construction: 1971, wheel width: 630 mm, table diameter: 630 mm, capacity: maximum diameter 630 mm, module 8 spare gears Tsdpfx Aoxcpzgeb Dsd weight 7500 kg

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Tsdpew Dcx Rofx Ab Djd Numerous tools and clamping devices available, see pictures and attachment.

Year of construction: 1970, condition: ready for operation (used), Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Todpexph Skefx Ab Djd

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: Tsdpov R Tmtjfx Ab Djd (1) CNC gear shaping machine Technical Details/Technical Details: English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D Todpfoxlug Hsx Ab Djd x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Tjdpsv Ehbbefx Ab Dsd Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm Tsdpfx Aev Santsb Ded table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: good (used), Max. diameter: 1250mm; Module: 14 Tsdpoxdi Aasfx Ab Dsd

Condition: ready for operation (used), Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible. Todpfx Aoxl Upzjb Dod

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW Tedow T Tngjpfx Ab Dsd weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 Tjdpfst Hwxzex Ab Dod min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 1997, max. module 2,5 min. module 0,3 control Fanuc 16 M current 19 A total power requirement 12 kVA weight of the machine ca. 5,5 t Manufacturer PFAUTER MIKRON Model A 15 CNC Equipment: - CNC Siemens 840 C - Wet and oil machining are both possible Tsdpfx Aevu E Nneb Djd - Manual and electrical circuit diagram High quality and stability, combined with corresponding performance data and modern CNC technology, make the A 15 CNC the ideal gear hobbing machine. The short changeover times also allow economical small series production. The impressive quality of Pfauter-Mikorn products guarantees you a trouble-free production process and a long service life for your machine. --> Technical data max. millable module for hobbing: 2.5 mm --> max. millable module for high-performance milling: 2.0 mm --> Number of teeth: 1 - 999 teeth Workpiece data: --> max workpiece Ø automatic loading: 60 mm --> max workpiece Ø manual loading: 100 mm --> max workpiece length automatic loading: 200 mm --> max workpiece length manual loading: 300 mm Working paths: --> X-axis (infeed): 66 mm --> Y-axis (milling length): 150 mm --> Y-axis (shifting): 100 mm --> A-axis swivelling angle (milling head): 50°/50° --> Quill stroke: 110 mm Feed speed: --> X-axis: 0 - 6,000 mm/min --> Z-axis: 0 - 6,000 mm/min --> Y-axis: 0 - 4,000 mm/min Speed range: --> B-axis (milling cutter): 200 - 4,000 min-1 --> C-axis (workpiece): 0 - 375 min-1 Milling performance: --> Motor power 50% ED (B-axis): 3.7 kW Travelling stick: --> max. clamping force: 9 kN --> infeed path: 205 mm Headstock: --> mounting: mechanical --> spindle passage: 32 mm --> Spindle axis from floor: 1200 mm --> Hydraulic operating pressure: 50 bar

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Machine still under power and production can be seen at any time. Tsdpfx Aou N E Rreb Ded Technical Data – PE 150 This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received. Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces. Hob Cutter: Max. permitted cutter outside diameter: 130 mm Max. length (depending on cutter arbor diameter): 220 mm Slide Travel: Radial (X-axis): 150 mm Tangential (Y-axis): 170 mm Axial (Z-axis): 200 mm Max. Swivel Angle of Milling Head: In +A direction: 30° In -A direction: 45° Workpiece Table: Outer diameter: 160 mm Bore diameter: 63 mm Overall Dimensions of the Machine: Length: 5,820 mm Width: 4,047 mm Height: 2,810 mm Approximate Weight of Machine: 8,000 kg Speeds: Feeds: Axes X, Y, and Z: 1 to 3,000 mm/min Rapid Traverses: Axes X, Y, and Z: 3,000 mm/min Spindle Speeds: Tool (S-spindle): 150 to 600 rpm Workpiece table (C-axis): 1 to 125 rpm Electrical Equipment: Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48.5 kVA Cable cross-section: 25 mm² Fusing: 100 A

Condition: used, max. wheel diameter 1500 mm gear width 000 mm axial slide travel 600 mm distance - table - arm of counterstay 1482 mm distance between table/spindle 1067 mm milling spindle - taper 55 diameter of hob 350 mm width of hob 400 mm axis distance between spindles min. / max. 50 / 935 mm adjustment of milling-spindle 250 mm milling slide swivelling 15 / 120 Grad table diameter 1200 mm table hole 300 mm taper MK 6 turning speed - milling spindle 25 - 150 U/min feeds axial 1 - 1000 mm/min radial feed 1 - 1000 mm/min Tsdewtry Nspfx Ab Dod tangential feed 1 - 500 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 total power requirement 100 kVA weight of the machine ca. 22 t dimensions of the machine ca. 10,3 x 7,4 x 5,3 m Machine has only internal milling head.

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Tjdpfswkih Ejx Ab Dsd

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 Tedpfx Aswdyx Ueb Dod min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wheel width: 380 mm, TECHNICAL DESCRIPTION: Linear axes: – Radial slide (X-axis) – Tangential slide (Y-axis) – Axial slide (Z-axis) - Tailstock (Z4-axis) Rotary axes: Tedpfx Asvdnm Uob Dod – Milling head (A-axis) – Workpiece table (C-axis) – Swivel gripper for automatic workpiece change (E-axis) Spindle: – Milling cutter (S-Spindle) TECHNICAL DATA: – Control: SIEMENS SINUMERIK 840D Gear hob: – Largest permissible tip diameter: 130 mm – Greatest length (depending on milling arbor diameter): 220 mm - the max diameter of gear 380mm (depending of diameter of Hob) MACHINE Milling arbors: – Diameter: 40 mm – Acquisition cone: Steep cone ISO 40 Sledding trails: – Radial (X-axis): 185 mm – Tangential (Y-axis): 200 mm – Axial (Z-axis): 250 mm Largest milling head swivel angle: – Direction +A: 35° – Direction -A: 45° Workpiece table: – Outer diameter: 300 mm – Boron: 80 mm Speeds Rapid traverse/Feeds: – X-axis: 10.000 mm/min – Y and Z axis: 5.000 mm/min Drehzahlen: – Tool: 90 – 900 rpm – Workpiece table: 1 – 55 rpm Electrical equipment: – Operating voltage: 380/400 V – Supply voltage: 230 V – Control voltage: 24 V – Frequency: 60/50 Hz – Connected load of the machine: 48 kVA – Cable cross section: 25 mm2 – Protection: 100 A Overall dimensions of the machine: – Length/Width/Height: 6.435 x 4.930 x 3.210 mm – Machine weight approx: 11500 kg EQUIPMENT: – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation Notes: Machine with Load conveyor Machine in excellent condition Complete maintenance 12/2024 Machine with Dialog Program

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Todsvu E Nuopfx Ab Djd Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: ready for operation (used), max. wheel diameter 150 mm gear width 1 - 200 mm max. module 4 min. module 1 control Sinumerik 840 D table diameter 140 mm maximum axial offset 200 mm milling tool taper ISO 40 diameter of hob max. 130 mm cutter length max. 220 mm milling spindle speeds (infinitely variable) 300 - 1200 U/min shifting max. 170 mm milling head -swivable +/- 45 ° feed speeds 1 - 1500 mm/min rapid travel speed 3000 m/min max. workpiece diameter im Magazin: 150 mm total power requirement 50 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,7 x 3,6 x 2,6 m Used gear hobbing machine, Pfauter, new in 1992 completely overhauled in 2023 by the specialist company SerWeMa, with Siemens Sinumerik 840 D control system Tjdpfx Aevzhg Njb Dod and workpiece magazine.

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 27604, feed length Y-axis: 170 mm, feed length Z-axis: 200 mm, table diameter: 160 mm, spindle speed (max.): 600 rpm, TECHNICAL DETAILS X-axis: 150 mm Y-axis: 170 mm Z-axis: 200 mm Tedpfjv Rdwijx Ab Dsd Swivel angle: -150/30° Milling unit Max. hob diameter: 130 mm Max. hob length (shaft mill): 220 mm Max. module: 3 Cutter length: max. 220 mm Cutter speeds: continuously variable up to 600 rpm Milling arbor diameter: 32 mm Table Table diameter: 160 mm Table bore diameter: 63 mm Control & Retrofit Control: SINUMERIK 840 D SIEMENS Retrofit: Sinumerik 840 D / Windows XP Pro in 2010 MACHINE DETAILS Total power requirement: approx. 20 kW Machine weight: approx. 10,500 kg Space required: approx. 6.8 x 3.7 x 2.85 m

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW weight of the machine ca. t Todpfx Abju Sbfdj Dsd dimensions of the machine ca. m

Condition: used, Year of construction: 2002, functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Tedpfxjv I Tmuo Ab Dod Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: used, Year of construction: 2012, max. wheel diameter 600 mm gear width 600 mm profile depth 35 mm pivoting angle +/- 45 Grad grinding wheel speeds 600-6000 U/min dimensions of the machine ca. 5,1 x 6,5 x 3,7 m weight 17 t Tedpfxsw Tm Tpj Ab Dod feeds X-axis 10000 mm/min feeds Y-axis 5000 mm/min feeds Z-axis 10000 mm/min table turning speeds 0 - 14 U/min control FANUC Series 30i-MODEL A CNC: Fanuc 30i Model A Maximum gear outer diameter: 600 mm Maximum module: 15 Maximum gear width (face width): 110 mm Number of teeth: 1 to 300 Wheel diameter: 20" (inches) Factory spindle: 630 rpm Tool holder: No. 60 Grinding spindle: 3000 rpm Automatic door lock Smoke and mist separator MPG: Handwheel (MPG = Manual Pulse Generator) Dressing tools for finishing, diameter 2.82" Without coolant device