Used Pet Bottles for sale (1,528)

Condition: used, Bottling line for approx. 5000 bottles/h Additional title: returnable glass bottle filling, years of construction 199 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, , bph, empty bottle inspector (Heuft Reflexx InLine IR, , bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank Iodpfevcqd Tsx Ahvoap

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Iedpfx Ajvu Tt Iehvjap Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 1991, Additional title: 50,000 bo/h, crown caps Capacity: 50000 bph Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps Running direction: rigth -> left Iodpevcqr Refx Ahvoap Operation / Control: Siemens S5 Base construction: filling level filler with return air tube Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Formats: 0,5 L and 1 L bottles Ijdpevu Tufsfx Ahvjap Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Condition: used, Year of construction: 2002, Additional title: crate packer Capacity for plastic crates: 500 cycles/h Power: 11 kW active power/ 15 kVA apparent power Voltage: 230/400 V ± 5 % Frequency: 50 Hz ± 2 % Length: 4170 mm Width: 2550 mm Height: 2650 mm Weight: 4300 kg Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat Iaedpsvcq Acsfx Ahvep

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Capacity: 21000 bo/h Bottles each row: 16 bo/row Length: 8,64 m Width: 4,47 m Ijdpevcqgzjfx Ahvoap Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Condition: ready for operation (used), functionality: fully functional, Complete line for filling and packaging wine bottles. Iaedpfxjyn I Tme Ahvjp For a full description, see the attached PDF file.

Condition: used, Year of construction: 2007, machine/vehicle number: LC385, Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, this machine efficiently applies labels to the bottles, providing clear and professional branding for the products. Case Erector: Manufacturer: SistAI Model: HM 2000 Iodpfjvgufvjx Ahvjap Year: 1995 To complete the packaging process, a case erector by SistAI is included in the line. The HM 2000 model, manufactured in 1995, is a reliable machine that swiftly erects cases for efficient packaging and transportation of the bottles. Additional Details: The line’s production speed with 5-liter containers is 1800 to 2000 pieces per hour. The rinsing machine utilizes microfiltered water for treatment. The capper of the filling monoblock is equipped with interchangeable heads and channels based on production requirements. Cap sizes for screw caps include aluminum caps measuring 35 x 18 and plastic caps measuring 48 x 17. Used Complete Line for PET and Glass 2007, this complete line is in excellent condition and ready immedately for sale

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. Iaodpfx Ahsynkdzovop The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts - Control panel - Automatic CIP cleaning system - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface - Elevating bottle carrier

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Ijdpfjyk E Srsx Ahvjap

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Isdevgud Sspfx Ahvoap Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, total length: 1,685 mm, total width: 1,550 mm, total height: 2,260 mm, product height (max.): 310 mm, product width (max.): 150 mm, machine/vehicle number: 100281518, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Power supply: 200 – 240 V Frequency: 50 / 60 Hz Ijdpoympcmofx Ahvoap EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, Iaedpfx Aheyi Ezksvsp - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Iajdeyi Aywopfx Ahvjp

Condition: used, Year of construction: 2012, Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h Iasdpfx Aoyi Almehvep

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functional drinks Filling system: isobaric probe filling with electronic level control Fill range: 12 oz – 24 oz containers Labeling system: cold glue labeling Bottle detection: integrated bottle burst detection system Construction: all stainless steel, high-hygiene design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) Note: frequency / voltage converter required for non-US markets Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 Bottle Conveyors | KOSME | – | Included | 2015 Additional Information Manuals included Basic tooling and format change parts for 12 oz and 22 oz included Additional documentation available upon request All conveyance lines included Dismantling team available to supervise reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available upon request Iasdpfx Asyigigohvop

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Iasdpfxjxz Ehme Ahvep Weight: 1,500 kg Used machine

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Mzsf010, overall weight: 500 kg, total width: 1,200 mm, total height: 2,000 mm, total length: 2,200 mm, tank capacity: 30 l, compressed air connection: 0.5 bar, Equipment: CE marking, This line is suitable for automatic liquid filling of small glass bottles or plastic bottles. The whole line consists of a filling and capping machine, a labeling machine and a front and a final rotating table. Iedpfxoyg D Nbj Ahvjap The whole line can realize automatic bottle feeding - liquid filling - inner plug auto feeding and sealing- outer cap feeding and capping - wrapped around labeling - finished product collection and other functions. The whole line needs about 1-2 operators to operate and patrol, saving manpower. According to the customer's workshop layout, the whole line can be customized as I-shaped or L-shaped.

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced. Iajdpfjnxkxwsx Ahvep

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Ijdpfx Asxghnaehveap

Condition: used, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Iaodpjyhcgbjfx Ahvsp Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats. Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits. Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages. Installation Requirements & Site Preparation Footprint: 3.8 × 3.2 m; recommended service clearance aroun...

Year of construction: 2012, condition: used, machine/vehicle number: AT92, Used Bottle Dryer Matrix year 2012 12000 bph The Used Bottle Dryer Matrix year 2012 12000 bph provides a linear drying solution for bottles in high-speed bottling lines. The Italian manufacturer Matrix built this model in 2012 and named it Dryer 1 neck. The system, therefore, uses targeted airflow to dry the neck area of each bottle efficiently. It processes up to 12,000 bottles per hour, which enables seamless integration into automated bottling systems. Mechanical Configuration and Operating Features This linear system guides bottles through a single-entry point, which ensures precise flow control and consistent alignment during drying. The Used Bottle Dryer Matrix year 2012 12000 bph includes six drying heads that direct airflow specifically to the neck. As a result, the unit delivers highly effective drying before labeling or secondary packaging. In addition, the machine handles all bottle formats without requiring mechanical changeovers. Consequently, operators can switch between formats quickly, maintaining flexibility across different production needs. Moreover, the uniform layout of the drying heads guarantees consistent results regardless of bottle size or shape. Because of its modular construction, technicians can perform cleaning and inspection operations with minimal downtime. Similarly, maintenance staff can access internal components without dismantling adjacent units. Dimensions, Electrical Supply, and Energy Use The machine measures 1000 mm in length, 1000 mm in depth, and 2000 mm in height. These compact dimensions allow technicians to install the dryer easily within standard bottling environments. Furthermore, its footprint prevents interference with upstream and downstream machinery. The Used Bottle Dryer Matrix year 2012 12000 bph operates on 400 Volts, at 50 Hz, and consumes 5.5 kW. These values match typical European industrial standards. Therefore, engineers can connect the unit without additional power conversion or infrastructure changes. In terms of energy efficiency, the machine balances high output with relatively low consumption. Additionally, the robust frame ensures mechanical stability during continuous use. As such, it supports uninterrupted production in demanding environments. Safety Systems, Integration, and Operational Status Matrix equipped the unit with comprehensive safety systems, which comply with regulations in force at the time of manufacture. These include emergency stop buttons and protective panels, both of which ensure operator safety during regular operation and maintenance. Moreover, these safeguards reduce the risk of accidents and equipment damage. The machine currently remains in ready-for-operation condition. For this reason, technical teams can deploy it without preliminary servicing or calibration. Moreover, its single-bottle entry system facilitates easy alignment with conveyors... Iaodpfx Ajyhbwljhvep

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Mzvfm001, Equipment: CE marking, Automatic Eye drop filling machines are suitable for use in pharmaceutical, chemical, food, and light industries to fill glass, plastic, and metal containers using vacuum negative pressure and self-priming. The machines are designed for containers with small openings, where the surface tension of the liquid within the opening should exceed the static pressure. Examples include plastic bottles for oral liquids, medicated oil bottles, eye drop bottles, cosmetic perfume bottles, and battery fluid filling machines. Iodpfsygd Anex Ahveap

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Iaodpfx Ahjwqz Nnsvjp Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Year of construction: 2026, condition: new, Bath pasteurizer option is the perfect solution for post fill pasteurization of your bottled or canned products. 97 units of standard 0.75 L bottles easily fits in 4 baskets.  Our bath pasteurizers can be produced in two options: 1. Autonomous bath pasteurizer with electric heating elements and integrated control panel. 2. Bath pasteurizer as an option together with HEAT or ECOHEAT pasteurizers. Then water heating is done with our pasteurizer and the same control panel is used for controlling both devices. Features: Isdorif Smopfx Ahveap Mounted on pivoting wheels. Insulated heating bath to save the energy and temperature. Can be used for glass bottles, jars, cans, any other heat resistant package. Works with different products, like juices, jams, marmalades, puree, sauces, etc. Automatic temperature and time control. Water overflow protection. Fast and easy loading and unloading of bottle trays. Entirely made of stainless steel. The bottles, cans, or jars are loaded into the trays and then trays are loaded into the bath. The desired pasteurization temperature and holding time settings can be set simply using the integrated control panel or on the HEAT or ECOHEAT pasteurizers. At a start of process, bottles or jars are placed into the bath, then water is filled into the bath until it reaches bottle neck. Then pasteurizer is connected, temperature (max 90 C⁰) and time is set. Then it starts to heat up the water inside the bath. When set temperature is reached, timer turns on and pasteurization is started. In the meantime, in the new set of trays filled bottles can be loaded for a faster exchange process. When timer ends, water out of the bath pasteurizer is released and bottles are unloaded. As the temperature is only measured in the bath, it is important to monitor the core temperature of your product to ensure that adequate pasteurization has been achieved.