Used Pelletizing Plant for sale (3,301)

Condition: good (used), Year of construction: 2006, functionality: fully functional, Internal article number: 26098 Centrifuge Rösler Z 1000 ASS-2 Turbo Ndjdpfxez Dg T Ho Af Seb Year of manufacture: 2006 Last maintenance performed with service report from 02/2026 The system is fully functional and in good condition. Operating hours according to the maintenance report: approx. 32,000 hours (as of 02/2026) Dimensions (L x W x H): Centrifuge: 110 x 150 x 230 cm Lift pump: 50 x 70 x 80 cm Demineralized water tank: 120 x 240 x 210 cm Please note that you can find the suitable vibratory finishing system among the other offers.

Condition: new, functionality: fully functional, Copper Granulators Copper granulators GM-S03 / GM-S05 / GM-S08 / GM-S15 Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Figure 2 – Cable recycling systems Professional cable recycling machines GM-D550 & GM-T500 High-quality systems for the efficient processing and separation of cable material. Suitable for various cable types and industrial applications. GM-D550: Single-shaft shredder, 5.9 kW, approx. 450 kg GM-T500: Copper wire granulator, up to approx. 300–400 kg/h, 34.15 kW Figure 3 – Granulators / Shredders Ndsdsz Eil Uepfx Af Ssb Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance levels. Ideal for recycling operations, cable processing, and industrial applications.

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Njdpfx Afez Ehc Es Sjdb Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 844, PLEASE READ THE DESCRIPTION CAREFULLY Used IPF25 filling machine with integrated weigher for filling paper open-mouth bags, including bags with handles. The machine is suitable for processing a variety of bulk products, such as: Cat litter Pet food Charcoal Wood pellets Other dry bulk materials Ndodpfx Afezrvlde Sob .... Bag dimensions: Width: 150 to 300 mm Length: 300 to 600 mm Side gusset: 35 to 85 mm The machine is currently in our workshop and is undergoing refurbishment. The refurbishment work will be carried out in stages. If you are seriously interested, we can expedite this process so that the machine becomes available sooner. Please feel free to contact us for additional information or to arrange a viewing.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, pressure: 5 bar, total width: 1,800 mm, operating pressure: 4 bar, Now offering a new treating plant with a fully automatic door type IWT-Moldrup Timber Impregnation Plant – Ø1,800 × 12,000 mm Industrial pressure impregnation plant for the treatment of timber. The plant will be manufactured following an order and configured to suit the buyer’s treatment process and production requirements. Industrial Timber Impregnation Plant – Ø1,800 × 12,000 mm The plant is built around a pressure vessel measuring Ø1,800 mm in diameter and 12,000 mm in length. The specification can be tailored to the required preservative, timber dimensions, treatment cycles and level of automation. We offer to supply both autoclave alone and complete treating plant incl. pumpskid, storage tank etc. Depending on the agreed scope of supply, the installation can include preservative storage and working tanks, vacuum and pressure pumps, process piping and valves, timber loading equipment, safety systems and PLC-based controls. Nedpfx Afjz Eg Nqo Ssdb We can supply the plant with process automation and provide supervision during installation and commissioning, as agreed in the written contract. This is an offer for a newly manufactured plant. The equipment shown or described is not an existing plant available for immediate delivery. Final technical specifications, scope of supply, price and delivery time will be confirmed in our quotation. We also offer other diameters and lengths upon request. Please contact us with your treatment requirements for a detailed proposal.

Condition: used, Stock-No. 1820 LANCELIN cube-dicer granule size 4x4x3 mm Typ BG 200 Nsdpeb Ev Sfsfx Af Sjdb Capacity up 600 kg/h depending input material Drive 7,5 kW type L 212 - 200 mm ready for trials, ex our workshop Wuppertal Germany. You´re welcome

Condition: good (used), basket dimensions 0 Ndodpfsyfh Rtox Af Seb control 0 total power requirement 0 kW weight of the machine ca. 0 t ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power* (W) 800 Heating power (W) 800 Usable volume (liters) 8.6 Weight (kg) 14.8 Tank material: Stainless steel Housing material: Stainless steel 1.4301 External dimensions (W / D / H) (mm) 390 x 330 x 410 mm Usable dimensions W / D / H (mm) 300 / 240 / 140 With basket

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with Ndsdpfsz A Sxlex Af Seb 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch and Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 139,000 EUR net (negotiable, plus VAT) Condition & History: • Operating Hours: Approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, rebuilt in 2019/2020 by Kirsch & Mausser, featuring a cast-iron design and complete, modern peripherals. • Availability: Ready for immediate pickup. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch Size: 25 - 55 kg • Gas Type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire extinguishing water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via a potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (production, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuously adjustable roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touchscreen. Item 3: Semiautomatic Control System with Touchscreen Nedpfxoz Eah Hs Af Sodb • Freely positionable control panel with touchscreen. • Readability and automatic regulation of supply air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the roasting process. • Additional potentiometers for independent control of burner, roasting, and cooling fans. • Pneumatic operation of the green coffee feed and the outlet flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and closed machine hopper. Item 5: High Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact plate to prevent coffee breakage, connection to the cooling fan. • Air flap for regulating the rising speed, hand slide at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Drum Vacuum Measurement • Pressure sensor in the pipeline between the roaster and the system with direct display on the touchscreen. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No phone calls. • Legal: Commercial B2B sale with exclusion of any warranty, liability for defects, and right of return. The system is sold in its current condition. Disassembly and transport are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. Njdjyt Emnopfx Af Sjdb This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: used, functionality: fully functional, Double-deck sieve, 1,300 x 4,000 mm OD: 60x60 mm; UD: 15x15 mm Equipped with discharge chute, electric drive, and control cabinet Ndedpfx Asz Az I Sof Ssb Mobile unit on a single-axle trailer With discharge conveyor and discharge hopper

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Njdpfsz D Ihfox Af Sodb

Condition: good (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, Rühle Tumbler Ndsdpfoz D Dryox Af Sob MKR 130 380V With vacuum and cooling.

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, total weight: approx. 570 t per unit Njdpfjvg A Rasx Af Sedb

Condition: new, Year of construction: 2025, machine/vehicle number: 923912978,

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Nsdpfx Afezvh E Rj Sjdb

Condition: used, Drying tunnel for Impregnirka with CM Macchine RMS 40x800 discharge system. Ndedpoz Aiv Rjfx Af Ssb Tunnel length: 7800 mm Width: 310 mm Side material discharge.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; Ndodpfxoz Duuxj Af Seb various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Nodsu Ti Tvopfx Af Sedb Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm Nsdeyg D S Njpfx Af Ssdb - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, FOR SALE: COMPLETE ELBA EMC 38 READY-MIX CONCRETE PLANT – 2007 – 4 FRACTIONS – 2 × 50 T SILOS – PLC CONTROL For sale is a complete ELBA EMC 38 ready-mix concrete plant, manufactured in 2007. The equipment is sold as a complete technological system, including a 4-fraction batching system, a conveying belt system, 2 x 50-ton cement silos, automatic PLC control, and a control/office container. TECHNICAL DATA AND EQUIPMENT: • Manufacturer: ELBA • Type: EMC 38 • Year of manufacture: 2007 • Horizontal-shaft mixer with bevel gear drive • Mixer capacity: approx. 0.5 m³ / 500 liters per mixing cycle • Nominal operating capacity: approx. 38 m³/hour • 4-fraction batching system for aggregates • Conveying belt system • 2 cement silos, each with a capacity of 50 tons • Refurbished cement silos • New silo filters • New safety/overpressure valves • The mixer lining is in new condition and very good condition • Automatic PLC control • Control/office container included in the purchase price Ndsdpfx Aoz Db Tzef Seb DISMANTLING, LOADING AND TRANSPORT: The ready-mix concrete plant is sold in a dismantled condition. During dismantling, electrical cables and connections will be marked to ensure that the equipment can be reassembled and electrically reconnected in its new location as clearly as possible. The seller will arrange for the equipment to be loaded onto the buyer’s provided transport vehicles. The organization of transport, the provision of suitable transport vehicles, and all transport costs are the responsibility of the buyer. The equipment is sold in the condition documented in the photographs and with the equipment detailed above. Additional detailed photos, technical information, and videos are available upon request. Location: Hungary Purchase price: 120,000 EUR + VAT

Condition: used, machine/vehicle number: LC657, Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decanter): 4000 rpmSeparators: Alfa Laval model 407 (qty: 2)Malaxer (4 sections): SACMI, code 4/SMalaxer (1 section): Single-section unit for flexible batch managementPreparation: Olive elevator and hammer crusher for steady, uniform feed to malaxersAdvanced Automation & Control SystemsThe line is suitable for modernization with contemporary PLC/HMI architectures for recipe control, interlocks, and traceability. Individual machine controls can be consolidated into a central panel for streamlined operation, alarm handling, and start/stop sequencing across the preparation, malaxing, and separation stages. Safety interlocks and guarding can be integrated around rotating equipment and infeed areas for compliance and operator protection.Ready for integration with centralized PLC/HMI controlProvision for start/stop sequencing across crusher, malaxers, decanter, and separatorsEmergency-stop circuits and safety guarding recommended around rotating assembliesMain electrical switchboard to be provided by the buyer (not included)Production Line Integration CapabilitiesThis processing line is engineered to operate inline upstream of an edible oil bottling line. It interfaces seamlessly with downstream storage, filtration, and filling systems for retail or bulk packaging. Multiple malaxer sections provide format flexibility for varying batch sizes and olive characteristics, while the decanter and separators deliver continuous clarification suited to high-quality oil production.Machine type/categoryManufacturer / ModelYearOlive ElevatorAlfa LavalHammer CrusherAlfa Laval Ndedpfx Aszmpzhof Sob

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. corn starch) Ndjdpfx Aovlz H Rjf Sjb Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m Nsdpfoim I Rujx Af Sedb - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 970356, 970357, type of input current: three-phase, input voltage: 400 V, compressed air connection: 6 bar, input current: 40 A, air pressure: 6 bar, We offer this used Arodo Total Bag-Handling bagging machine, manufactured in 1997. The bagging line includes: - a hopper with a feeder for the material to be packaged - a bagging line (volumetric filling) with printing on individual bags - a line for stacking and gluing bags onto a pallet It was imported to Poland from Belgium in 2016. The palletizer's capacity is up to 1300 bags/hour (the bagging section's capacity is approximately 600 bags/hour). The bags have maximum dimensions of 550 mm width and 950 mm length. The maximum bag weight is 50 kg. The palletizer is automatic and stacks 5 bags per layer. It is designed to work with material with a particle size of 0–40 mm. The line has been in operation for 17 years. Serial numbers: 970356, 970357 Year of manufacture: 1997 Number of phases: 3 phases Voltage: 400 V Frequency: 50 Hz Supply current: 40 A Rated current: 38.8 A Air pressure: 6-9 bar Maximum pallet weight: 1750 kg Maximum bag weight: 50 kg A complete operating manual with technical documentation is available in French and Polish (translation provided). The line can be started up. The price includes training on how to use the line after purchase. If you have any questions or need additional information, please contact us. Nsdpfozph Aijx Af Sodb