Used Pellet for sale (269)

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW Rodei Dtbqopfx Adajn L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Rjdpsd Sg Hcsfx Adajn Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Rodsiyyndopfx Adasn More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Rsdpoiyynwefx Adaon Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 Rodpfjd Sg Hrjx Adasn 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, This listing is for a nonoperational Eppendorf Mixmate 5353 Mixer. This unit is supplied nonoperational and is ready for immediate release. The Eppendorf MixMate 5353 is an advanced lab mixer designed for optimal precision and efficiency when handling small sample volumes, making it an essential tool for various applications in research and clinical settings. Key Features: Versatile Format Compatibility: The MixMate can accommodate a wide range of tube and plate formats, including 96 and 384 well plates, as well as 0.2ml PCR tubes, 0.5ml, 1.5ml, and 2.0ml tubes. Integrated Vortexing Action: Its unique vortexing action is perfect for applications such as resuspending bacterial pellets, DNA samples, cell cultures, conducting immunoassays, and performing solubility tests. For instance, it can quickly re-suspend DNA pellets after ethanol precipitation, ensuring thorough mixing without sample loss. Speed and Flexibility: Mixing Frequency: Ranges from 300 to 3,000 RPM in 50 RPM increments. Touch Vortexing Frequency: Reaches up to 3,500 RPM for rapid, on-demand mixing. 2D Mix Action: The innovative 2D mixing action ensures uniform mixing across all wells, which is critical for experiments requiring consistent sample homogeneity, such as high-throughput screening assays. Adjustable Mixing Time: Users can set mixing times between 15 seconds and 99.5 hours or choose continuous operation, providing flexibility for both quick mixing tasks and longer protocols. Programmable Features: The user-friendly digital control panel can store up to 5 predefined programs, allowing for quick access to frequently used mixing parameters. Specifications: Plate Dimensions: Accommodates plates sized 5 x 3 inches. Power Requirements: Operates on 115 – 230V; 50-60 Hz. Dimensions: Compact size of 9 x 7 x 7 inches. Weight: Weighs 10 lbs, making it portable yet sturdy. Rjdpfx Adjxv A Tcoaon Applications: The Eppendorf MixMate 5353 is ideal for: Molecular Biology: Resuspending nucleic acid samples and cell cultures. Immunology: Preparing samples for immunoassays with consistent mixing. Pharmacology: Conducting solubility tests for drug compounds in different solvents.

Condition: used, This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready for immediate release. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Rsdpfx Asxx Akgjdasn Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

Condition: used, This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Redpfxexx Appj Adasn Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Redpfx Adexxy Ucsasn Heraeus Multifuge 1S

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Redjxzg Eyspfx Adaon Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: used, Year of construction: 2007, functionality: fully functional, power: 320 kW (435.08 HP), total width: 2,780 mm, total length: 3,340 mm, total height: 2,560 mm, Equipment: documentation/manual, Fröling wood chip and pellet boiler "Turbomat" 320 kW Year of manufacture: 2007 Completely overhauled and newly lined with refractory bricks in 2019 Comes with electrical control panel, with the option for automatic error reporting via app. Dimensions: see images Redpoxb Erfjfx Adajn Wood chips, biomass, pellets, heating system, pellet heating, carpentry chips, carpenter, joinery, wood shavings, sawdust. Cleaning springs for the heat exchanger base have been removed but are included as new spare parts. Does not include silo discharge system, but does include drop chute and rotary valve. Chimney with induced draft fans, chimney with 35 cm diameter included. Riser flue not included. Has always been maintained and is in good condition. The system can be transported out of the building at ground level. No guarantee or warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Redswg Sgcspfx Adasn

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure Redpfowigbmjx Adajn 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: Redpjw Ttxfsfx Adajn System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Redpfx Aovzub Hodasn Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Rsdpfomgb Hhex Adaen Pressure up to 3 bar g with static seals PTD 80 Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: container with extraction augers. The container was used as a buffer in a straw pellet manufacturing facility. Container dimensions: Height: 7750 mm, Rjdpfxjwy T R No Adasn Width: 2150 mm, Depth: 3140 mm, Rail height on container: 900 mm, Container capacity: approx. 40 m3, Discharge window size: 1000x350 mm 3 extraction augers, each 1.1 kW The container has been disassembled and is ready for transport. For more photos and details, please contact me. Machines available for inspection in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Year of construction: 2011, condition: used, functionality: unexamined, For sale: rotary – centrifugal screener. The screener was used in a pellet production line with a throughput of approx. 8 t/h. Manufacturer: AFAU, Name: TAMIZADOR, Model: TR-20, Year of manufacture: 2011, Machine outer diameter: 1550 mm Screen diameter: approx. 1350 mm, Overall height: 680 mm Rated motor power: 1.5 kW The screener has been dismantled and is ready for transport. Contact me for more photos and details. Machines can be inspected in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Redewyc Hajpfx Adaen

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle Redpfx Ajghbkyjdaen - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Fresenius Kabi Lovo Automated Cell Processing System Rodpfx Ajq Avtgodasn PN: 6R4900 Condition: Used in excellent condition. PROCESS FAST. MAXIMIZE CONTROL. Only Lovo delivers automated, functionally closed cell processing through spinning membrane filtration. Product Features: The Lovo Cell Processing System is a benchtop cell processor that automates labor-intensive tasks of washing and concentrating white blood cell products. Using spinning membrane technology, Lovo allows for non-pelletizing cell concentration and reduces the need for manual re-suspension. Additional Features: Processing volume range: 1 mL to 21 L Operator-defined processing parameters including levels of supernatant removal and final product volume. The LOVO system is for laboratory use only. Cells processed on this system are not intended for diagnostic purposes, for direct transfusion, or for use in the production of a therapeutic product(s) or vaccine(s) for clinical use, unless the user has obtained advanced regulatory clearance or approval from the appropriate regulatory agency. Cell types Fresh, cryo-preserved, and culture-expanded white blood cells, including, but not limited to, leukapheresis CD34+ cells, CAR T-cells, TILs, NK cells, and MSCs Volume range Source Up to 22 L Output* 50 mL – 50 L Wash-out range Up to 99.9999%* System components • 73 lb, 35.3” x 17.6” x 24.5” (W x D x H) benchtop instrument • Single-use processing kit with spinning membrane module We have two units in stock, both fully functional. Password need to be changed. Please check out our other listing as well.

Condition: excellent (used), functionality: fully functional, used deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 decks, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood deck ovens Crosta 3.18.20, each 3 decks (with pellets), with 1 loading and unloading system Wachtel Comfort Lader (with Wachtel WinServer), year of manufacture 2016, in bakery condition, for self-dismantling, worked flawlessly until the closure of the bakery Rsdpfox E Df Isx Adajn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, screw diameter: 90 mm, overall weight: 11,000 kg, clamping force: 160 kN, total width: 2,200 mm, total length: 5,200 mm, total height: 2,200 mm, axle spacing: 250 mm, Equipment: documentation/manual, Hello, This offer concerns extrusion blow molding machines for PP, HDPE, PE, PE/PP, and HDPE/PP (canisters and bottles up to 6L capacity). Four complete machines are available, each equipped with all necessary accessories: compressors with tanks, chillers, scrap grinders with conveyors, color mixers, pneumatic pellet feeders, bottle conveyors, and a bottle leak tester. The machines feature the Moog Parison Controller system—an advanced control solution for plastic blow molding machinery that precisely regulates parison wall thickness, ensuring uniform material distribution in the mold. This results in improved product quality, higher durability, and reduced raw material consumption in the production of bottles and other packaging. The main control panel supports both Polish and English languages. Attached you will find a technical drawing of the blow mold mounting base and a video demonstrating the bottle production and transport process. - 4 sets available - Price per set: €36,000 - Special price for all four sets: €124,000 Main technical specifications of the machine: - Maximum product capacity: 6 L - Maximum output (blow cycles): 700 x 2 stations/hour - Screw diameter: 90 mm - Screw L/D ratio: 24:1 Rodpfx Adjxhg N Esaon - Plasticizing capacity: 150 kg/h - Maximum extruder die diameter: 200 mm - Distance between die centers: 250 mm - Mold thickness: 195–580 mm - Maximum flat mold surface (W x H): 450 x 580 mm - Clamping force: 160 kN - Machine dimensions (L x W x H): 5.2 m x 2.2 m x 2.2 m - Machine weight: 11,000 kg

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw Rjdpew Ulp Eofx Adaen 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: new, Year of construction: 2022, The FRÖLING Turbomat is a fully automatic, unique heating system designed for various types of wood materials. In addition to wood chips, it is also suitable for burning other dry fuels (with up to 35% moisture content, such as wood industry materials and pellets). Rodpfxevf Et Is Adajn Fuel supply, combustion, cleaning, and ash removal are all performed completely automatically. Technical specifications Nominal heat output [kW]: 550 Flue pipe diameter [mm]: 350 Total dry weight including attachments [kg]: 8470 Heat exchanger water capacity [l]: 1040 Maximum permitted operating temperature [°C]: 90 Minimum boiler return temperature [°C]: 65 Maximum permitted working over-pressure [bar]: 6 Flue gas temperature (NL / PL) [°C]: 140/110 The price does not include the cost of storage, transport, installation and commissioning.

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Rsdpfx Adeipyh Ijasn