Used Pasilac Therm for sale (3,828)

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Credpsxpqzzjfx Ab Tok Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Codpfx Absxpf I Ns Terk Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller Cedpjxr S Rpsfx Ab Tjrk

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Mecatherm Baguette Line Brand: MECATHERM – Model: TRADIVIDER RT II * Dough dividing from 200 g to 1000 g * Output up to 1700 kg/h for highly hydrated doughs and long proofing times Dough divider hopper – Capacity: 250 kg for pre-portioning of 15 kg Divider – Brand: MECATHERM – TRADIVIDER Type 32/16, including: * 1 sorting hopper – Capacity: 300 liters * 1 multi-piston dividing chamber on a swing frame Csdsxn Iruepfx Ab Tsrk * 1 swing frame drive system * 1 pin-type dough gripper * 1 dough piece receiving conveyor * 1 discharge conveyor * Dividing range: 200/400 g with 32 pistons – Capacity: 1360 kg dough per hour * Dividing range: 350/1000 g with 16 pistons – Capacity: 1700 kg dough per hour Electrical equipment Dusting machine * Complete flour dusting of the dough with reclamation of excess flour Intermediate Proofing and Resting Block Brand: MECATHERM – Model: RTH, including: * 1 inclined conveyor – Width: 400 mm with curve and discharge belt on the first level * 1 automatic station for pre-proofing, moulding, scoring, elongating, and depositing on honeycomb trays * At the end of the conveyor: 1 6-tray stacker with grissini to enhance operator efficiency * Mesh return conveyor under the RT block Output for long loaves and baguettes: up to 2,500 loaves per hour; for small breads: 5,000 to 12,500 pieces per hour Portioning area for long dough pieces: 2, 3, 4, 5, or 6 portions Maximum length of long dough pieces: 800 mm * RT block length: 8.17 m * RT block width: 1.41 m * RT block height: 3.05 m Line in good condition when production ceased in May 2021 – currently disassembled and stored in containers Commissioned at the beginning of 2014 Delivery and commissioning available upon request

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Credpfx Asxrf Iujb Tok

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1650G. The unit has been tested for functionality! Comes with an 8-meter torch package. 380 Volt. 30-100 Amp power output. Quality cut up to approx. 35 mm. Severance cut up to approx. 45 mm. Includes several spare nozzles (see photo). Torch and ground cable have been repaired with insulation tape in some places (see photo). Csdpfxexq Rbde Ab Tjrk

Condition: excellent (used), Carbide saws and tools washing machine ROTATHERM model IWA620 Cjdpew Hum Sefx Ab Terk

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: SC7.3 - 321ESE00112, cooling capacity: 7.32 kW (9.95 HP), type of input current: AC, type of cooling: air, overall weight: 90 kg, ambient temperature (max.): 31 °C, ambient temperature (min.): 1 °C, input voltage: 230 V, total width: 600 mm, total length: 490 mm, total height: 1,303 mm, warranty duration: 3 months, Equipment: type plate available, MTA Spotcooler SC7.3 Cedpfx Aow Drtqob Tjrk Manufacturer: THERMOBILE INDUSTRIES BV Model: Coolmobile 25 (Industrial version) Mobile spot cooler Coolmobile 25 for targeted cooling of, for example, materials, cooling tunnels, specific room areas, and heat sources. The spot cooler is mobile on wheels and can be easily moved to the desired cooling location. The control panel has a temperature range from +1°C to +31°C and can be switched on and off automatically via a timer. The unit can be used anywhere with a standard Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged using a flange and warm air hose (both not included in the scope of supply). Technical data: Cooling capacity / Kw: 7.32 (25,000 Btu) Airflow rate m³/h: 10.5 - 8.5 Power supply / V / Hz: 230 / 50 Starting current / A: 57 Operating current / A: 13 Power consumption / Kw: 2.6 Air filter: Aluminum and carbon Max. static pressure / mm: 30 WG ΔT °C: 10 - 15 Max. room size / m²: 58 Dimensions (W x H x D) / mm: 490 x 1303 x 600 Weight / kg: 90 Outlet: 3 x 125 mm Max. hose length / m: 12 Power cable length / m: 3 Refrigerant: R407C (1.2 kg) Dimensions (mm) L x W x H: 490 x 600 x 1303 Weight (kg): 90 Serial No.: 321ESE00112 Year of manufacture: 2019 Condition: Visual: 2, Technically OK Used Used machines may have visual imperfections due to their previous use. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), functionality: fully functional, UV/IR tunnel in B1 format with automatic delivery. Can be mounted to a screen printing or B1 offset machine, feeding from another machine or a coating unit is available. Codpfexn T Nxjx Ab Terk

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Cedexn T Nrspfx Ab Terk Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 Csdpfx Abowth Uis Tork 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1000G Codpfx Abexq N Trs Terk Device has been function tested! with 10-meter torch package on transport cart 380 Volt 20–60 ampere power output Quality cut up to approx. 22 mm Severance cut up to approx. 30 mm + several spare nozzles (see photo)

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Thermo Electron LED GmbH vacuum dryer with jacketed heating, for flammable solvents, type: VT 6130 M-BL, serial number: 40291081, 230 V, 1 Ph, 50/60 Hz, 9.6 A, 2.2 kW, dimensions: 900 mm x 880 mm x 890 mm. Codpfx Absr Ei Ars Terk Comes with a Vacuubrand md 4c three-stage chemistry-design diaphragm pump.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 13,100 mm, total width: 3,000 mm, year of last overhaul: 2024, Buns production line. Mixer, bowl lifter, mecatherm, trays and tray racks. Total trays ~400pcs and racks ~30pcs. Racks can hold 16 trays. Many trays needed recoating. Crsdpoxnytksfx Ab Tek

Year of construction: 2021, condition: as good as new (ex-display), Colimatic Thermoformer 2021, As New Price € 29,990.00 Model - Thera 450 L Only 10 hours on the machine, only used for tests. 415v / 50 hz PLC Siemens Cedpjvc Ilhsfx Ab Terk Speed up to 14 cycles/min Film from 80 my to 800 my Busch vacuum pump

Year of construction: 2013, condition: used, max. temperature 1.100 Grad Cjdpfx Aoxf I T Hjb Tjrk size of opening 250 x 170 mm depth of chamber 370 mm volume 15 L voltage 230 V total power requirement 3,6 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,48 x 0,65 x 0,57 m - Serial-No.: 271414 - control: NABERTHERM B180

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Credpfevrg Slex Ab Tsk Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller

Year of construction: 2020, condition: like new (used), functionality: fully functional, Brand new never used. Please check out our other listings as well. Crsdpfxevzr Uds Ab Tek

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Crodsxmhhajpfx Ab Tek Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Crodpfx Aexl Ezheb Tjk Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, empty load weight: 2,000 kg, input voltage: 400 V, input frequency: 50 Hz, EPS shredder with the following components: Styrofoam pre-shredder KSTAS Styrofoam fine mill KH3 Crsdoxly Euopfx Ab Tek Finished product system TW200FPA Industrial silo for EPS storage Blower Pipe system The new price of the machine in 2023 was approximately €90,000. MACHINE DETAILS Electrical specifications Power: 8 kW Voltage: 400 V Frequency: 50 Hz Rated current: 16 A Dimensions & weight Dimensions (L×W×H): 4.00 × 2.00 × 3.50 m Net weight: 2,000 kg

Condition: good (used), functionality: fully functional, Thermal-Dynamics plasma and oxy-fuel cutting table, model ULTRA-CUT 300XT CE Technical specifications Working area: 12000 x 3000 mm Overall dimensions: 14000 x 5000 mm Machine weight: approx. 5000 kg Crjdpfoxlqx Ejx Ab Tsk Power supply: single-phase 220 V - 3 Amp Torch height control: automatic adjustment Equipped with a CNC controller featuring motion control, I/O, user interface, and an integrated optional plasma height control, all in one package. Runs on Windows 7, 2 GB RAM, 2 USB ports, 120 GB SATA SSD hard drive, etc. Sold with its manual. Retrofit completed in 2021. Selling due to modernization of facilities.

Year of construction: 2020, condition: new, functionality: fully functional, Brand new in the box, never used. Please check out our other listings as well. Cjdpfx Abswiqggs Terk

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Csdsxhf Utepfx Ab Tork Dimensions: Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: used, This listing is for the Thermo Scientific Finnpipette. 0.5ml The unit is in full working condition and is ready for immediate use The Intuitive menu and simple button layout, allow you to choose all the pipetting functions you need quickly and easily. The large display is easy to read and shows the full names of all functions. Easily accessible menu offers 10 different pipetting functions and 9 pipetting speeds to handle a wide variety of pipetting applications. Select common functions such as forward, reverse, diluting, and stepper pipetting or advanced functions like mixing, Crsdpfxsxhf Nqj Ab Tok sequential stepping, or program up to 9 of your own functions. Solid-shaped and perfectly balanced handle fits comfortably and securely in your hand, and together with the finger rest, it keeps pipetting stress and exertion to a minimum. Ergonomically designed to let your index finger control dispensing with just a soft press of the button. Adjust the finger rest a full 120° of movement to fit your hand exactly— whether you’re left- or right-handed. Very low tip ejection force minimizes strain on your thumb.