Used Paper Bale Press for sale (13,691)

Condition: excellent (used), Year of construction: 2016, pressing force: 80 t, Equipment: documentation/manual, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Ffsdpeykyu Ujfx Adpow Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t Fedox H R U Sopfx Adpsfw

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Ffodet Ucqfjpfx Adpew Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm The press was in operation until the production line was shut down.

Condition: excellent (used), Year of construction: 2015, Brand: HSM Model: V-press 860 max Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Fedpfxoykpc Us Adpefw Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening: 120 cm x 65 cm Condition: Very good! Functionality tested. FLITS Rental & Sales service: Each machine comes with a bundle of baling wire (120 wires). Need more wire bundles? Request a non-binding quotation.

Condition: used, Year of construction: 1994, operating hours: 21,900 h, functionality: fully functional, Baler Avermann, Type AVOS 1411 – 37/60, Pressing force 60 t, Year of manufacture 1994, good condition, with conveyor belt Technical Data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of manufacture: 1994 Operating hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Throughput rate (idle): 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9,000 mm Machine dimensions: approx. 6,000 x 1,700 x 3,730 mm (LxWxH) Fedpfx Adsyhcybepjfw Machine weight: approx. 12,000 kg Note: The baler is still installed and can be inspected under power upon request. Dismantling and loading are not included in the scope of supply. Please note: All technical data are based on the manufacturer's information. We assume no liability for the specifications provided or for any potential errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Viewing is possible by prior arrangement. The sale is ex works, subject to advance payment, with no warranty or guarantee.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Fodoygud Ajpfx Adpofw Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Fodpfx Adeygk H Tjpefw Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, machine/vehicle number: 22031, Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 ASerial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video Fodpfx Aeiiv S Sodpsfw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, Equipment: documentation/manual, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Fsdpfx Ajyi Sfvsdpjfw Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: ready for operation (used), functionality: fully functional, pressing force: 38 t, MPC 20 PE compactor container Fsdpfx Aeyiltqedpsfw

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film Fedpfx Adsyf Eh Aspofw The baler is in good, fully functional condition and has been inspected and tested by us. The video can be found on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We accept no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Paper drilling machine Citoborma 490 (with sliding table) Hang part no.: 713-0295/108 611 Nagel part no.: 1854060 05/2019 (see photo) Ffodsyifuujpfx Adpsw

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Ffjdpfx Aeip D Rzodpow

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Ffjdpjirakgjfx Adpew

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Ffodpfx Aoip D Rpjdpsw

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Fjdpfx Adjh Dy Rfspefw Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: used, Year of construction: 2008, Nagel Digifold Creasing and folding in a single operation Feeding: Suction feeder draws paper from below Maximum paper size (mm) L x W: 700 x 358 Minimum paper size (mm) L x W: 210 x 140 Maximum paper weight (gsm): 400 Minimum paper weight (gsm): 100 Max. number of creases per sheet: 9 Max. number of folds per sheet: 2 Max. number of program memory locations: 9 Min. distance between two creases (mm): 40 Min. distance between two folds (mm): 70 Min. distance from leading edge to first crease (mm): 50 Min. distance from leading edge to first fold (mm): 50 Min. distance from trailing edge to last crease (mm): 50 Ffodpjyhztkjfx Adpjw Min. distance from trailing edge to last fold (mm): 50 Min. fold length (mm): 70 Max. fold length (mm): up to 450 (automatic feeder), up to 1,800 (manual feed) Fine adjustment (mm increments): 0.1 Max. speed (A4 sheets/hour): 5,000+ Dimensions (mm): 1,980 x 655 x 1,265 (L x W x H) Weight (kg): 190 Power supply (V): 220

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 69000, input voltage: 400 V, input current: 1 A, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, Professional Prym Fashion eyelet/assembly press, type NE 18/3 K, year of manufacture 2004, in very good and fully functional condition. Ffsdpfx Adeyhnmmspow The press is fully equipped with Prym control, feed/rotation modules, foot control, and safety features. Operation is possible in manual, semi-automatic, and automatic modes, offering flexibility for various applications and production series. Connection: 3×400 V / 50 Hz. Inspection and testing under power possible.

Condition: ready for operation (used), Vertical baler Dixi 50S PET Year of manufacture: 2019-2021 Fodpsv Amtksfx Adpjfw Bale dimensions (L x W x H) (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Technical data (L x W x H) (mm): 1600 x 1300 x 3100 Filling opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 V

Condition: good (used), Year of construction: 2015, functionality: fully functional, Dixi 60 SLD Baler, Year of Manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of Manufacture: 2015 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (WxL) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (WxHxL) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine Weight: approx. 5,420 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspections, including under power, are possible at any time by arrangement. On request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00, and on Fridays from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's information. We accept no liability for the accuracy of the stated information or possible errors. Fodpfx Ajyba Amjdpsfw The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are available by appointment. Sale is on a prepayment basis, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baling Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Feed Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film Fsdjyba Agepfx Adpofw The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Viewings, including under power, are possible at any time by appointment. Upon request, we can also perform test runs with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 am to 2:00 pm. On Friday, we are available from 8:00 am to 1:00 pm. Please note: All technical data is based on the manufacturer's information. We accept no liability for any errors in the information provided. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: triple, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. You will find the video on our website or YouTube channel. The hydraulic hoses should be renewed. Inspections with power connection are possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on information provided by the manufacturer. We assume no liability for the information provided or for any errors. This offer is subject to change and prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is conducted on a prepayment basis, ex works, without warranty or guarantee. Ffsdpfeybaz Asx Adpsw

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Fodsybaziopfx Adpjfw Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for possible errors. This offer is subject to change without notice, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: Fodeybapaopfx Adpsfw All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Ffjdpfeybaniox Adpow Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.