Used Painting Room for sale (5,993)

Year of construction: 1988, condition: good (used), Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Bdodork Aaajpfx Ab Tsk

Year of construction: 2018, condition: new, Exhibition machine Year of construction: 2018 with full warranty Equipment and technical data: Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Bdjdpfxsw I Uizs Ab Tsk Availability: Short term Location: Hochheim

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter Bdodpfxjicic Hs Ab Tok - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, maximum load weight: 19,680 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Model 3 axle ET-26-4 ADR 25.500 L 4 rum Year 2009 Condition Good Serial Number YF908S16S95049774 Ref. nr. 7832 Reg. date: 30.06.2009 Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 20%-40% -40% Toolbox: ? Total weight: 24000 Kg Net weight: 4320 Kg Load capacity 19680 Kg Tank: 25500 L Compartments: 4 (10000 L + 5000 L + 5000 L + 5000 L) Bedpewlydyefx Ab Tjdk

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t Bdjdpfx Asw D Hhpob Tjk

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Bedpfx Abepcgy Rs Tsdk

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Bodpfx Aeg Nw Rzsb Tedk

Condition: new, New device ADVANTAGES Quality from the region Out of conviction – 5-year warranty 360° rotatable 360° adjustable support arms Galvanised support arms – easy to clean with thinner Height adjustable TECHNICAL DATA Load capacity: 100 kg Rotatable: 360° Adjustable support arms: 4 Height adjustable: 950–1250 mm Max. length: 700–1260 mm Max. width: Bedow I Uy Hspfx Ab Tsdk 600–1120 mm Max. diagonal: 900–1680 mm Availability: immediately Stock location: Hochheim

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change Bdodpfx Absmquwqs Tjk - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN Bedpfjw A Ap Hsx Ab Tsdk table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, workpiece weight (max.): 750 kg, working width: 380 mm, working height: 950 mm, input voltage: 400 V, power: 2.5 kW (3.40 HP), IPM380 Industrial Brushing Machine – For Planing Mills and Large Timber Construction Wherever even more performance or convenience is required, the hybrid brushing machine IPM380 steps in. This machine delivers results that are hard to match: 8 axes, infinitely adjustable, paired with 4 different brush types that can be finely tuned for outstanding finish quality. Your advantages at a glance: Fast: 20–120 m/min feed speed Bjdew Av T Espfx Ab Todk Minimal downtime: 5 minutes setup // 20–45 minutes full cleaning Solid PP material: Almost nothing sticks – easy to clean Hybrid design: Can be converted into a profile spray machine using a quick-swap insert Durable: Made in Denmark, electronics from Germany Expandable: With matching drying technology, automation, and sanding units – we supply complete finishing lines Expert support: We know what we’re doing – and we’re here to advise and assist so that you’re 100% satisfied And for those who need more: We also build this model series in larger formats: 640 mm height × 380 mm width 1,300 mm height × 900 mm width What configuration do you need? You’ll find more details on the Bruhn Lackieranlagen website as well as in the attached video. And of course, we’re personally available to assist you. Simply get in touch to receive a solution tailored specifically to your needs. We look forward to impressing you!

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Bodpfxotpp H Es Ab Todk

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth Bdjdpfx Ashbyr Sjb Tok l) Pressurized sanding booth (with 2 suction benches)

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, A combination of cooling and freezer cells from Dresdner Bjdetn U Rpopfx Ab Tjdk Kühlanlagenbau is offered. The scope of the offer includes the cooling units and the electrical equipment. (Lighting, control cabinet, etc.) The cooling unit for the freezer area is unfortunately defective. The pallet racks shown in the pictures are not for sale. Size of cooling area (anteroom): 5.60m x 2.75m = 15.4m² Size of freezer area: 5.60m x 12.59m = 70.5m² Clear room height: 3.50m Insulation thickness: 120mm Further dimensions and information can be found in the attached PDF document. The unit is not dismantled and can be viewed at the production site in Thuringia by arrangement. Assistance with dismantling is possible by arrangement.

Condition: used, Year of construction: 1988, x-travel 310 mm y-travel 340 mm z-travel 170 mm total power requirement 2,5 kW Bodpfx Aot Hxateb Todk weight of the machine ca. 900 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters Bjdpfxew A Apyo Ab Todk - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Bdodpfx Aoffc Rasb Tok Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm Bsdjwwwr Ejpfx Ab Tsdk table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: excellent (used), Roller PAINTING and FINISHING LINE (UV), max. working width mm 1300. Composed by: 01) cod. J05012) Sanding Machine "COSTA LEVIGATRICI" Mod. SN TR LFT 3 TT 1350 02) code Y11034) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 03) cod. Y11036) UV oven (1 lamp) "CEFLA" Mod. UV 2000 M1 - TT 2000 Bedpehyty Ajfx Ab Tsdk 04) code Y11037) Roller Coater"SORBINI by CEFLA" Mod. SMARTCOATER M-1 AN 05) cod. Y11041) UV oven (2 lamps) "CEFLA" Mod. UV-R M20 06) code Y11061) Sanding Machine "COSTA LEVIGATRICI" Mod. SH3 TR TTTTR 1350 07) code Y11042) Roller Coater "SORBINI by CEFLA" Mod. SMARTCOATER MF-EVO 08) code Y11039) UV oven (2 lamps) "CEFLA" Mod. UV-R M2 09) code Y11035) Roller Coater "BURKLE" Mod. RCL-M 1300 (e.a.s.y. Coater) 10) code Y11043) UV oven (3 lamps) "CEFLA" Mod. UV-R M3

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator Bsdpoww Adtefx Ab Tedk -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: used, x-travel 500 mm y-travel 400 mm Bsdpfxov Td Elj Ab Tjdk z-travel 400 mm

Condition: good (used), Spray booth water stabilizer Technical data: Agitator Pump Filling spout Ø 9 cm Thermostat display Level indicator Bdjdsiu Hwuepfx Ab Tek Ø 176cm H: 67 Thickness 3mm More articles - new and used - you will find in our store! International shipping costs on request!

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 370791, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, table width: 420 mm, table length: 800 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS X-axis travel: 600 mm Bdedpfowvi T Eox Ab Tsk Y-axis travel: 400 mm Z-axis travel: 400 mm X-axis feed rate: 2,000 mm/min Y-axis feed rate: 2,000 mm/min Z-axis feed rate: 2,000 mm/min X-axis rapid traverse: 5,000 mm/min Y-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 4,000 mm/min SPINDLE Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm TABLE Table width: 420 mm Table length: 800 mm MACHINE DETAILS Total height: 2,000 mm Total width: 1,750 mm Total length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Power consumption: 13 kVA EQUIPMENT - The machine vice visible on the table surface is not included in the scope of delivery.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, PK clima – Clean Rooms We can offer three different cleanroom configurations. Please let us know your required size: A x 150 m² (3 chambers) B x 320 m² (7 chambers) – 112 m² + 55 m² + 34 m² + 38 m² + 40 m² + 25 m² C x (please specify) Item 1) Cleanroom Block 1 approx. 150 m² Inlet with the following technical specifications: - Cleanroom Class ISO6 - Lighting: 300 lux - All doors equipped with electric locks Manufacturer and model: MGB - Clear room height: 2,500 mm throughout On-site extraction system: 500–2,000 m³/h Inlet slot: 1,800 x 50 mm Outlet 1: 3,700 x 50 mm Outlet slot: 1,800 x 50 mm 2 double doors 1 maintenance door • DIG Cell: Solvent extraction via industrial exhaust fan Manufacturer: Ghrd, with external drive motor and frequency converter Approx. 5 g/m² solvent applied to the panel Exhaust duct outlets 2 m above the cell Roof penetrations and sealing to be provided by the customer Negative pressure monitoring included 2 double doors • T Cell: Extraction via industrial exhaust fan Manufacturer: Ghrd, with external drive motor and frequency converter Exhaust air combined with that of the DIG cell Negative pressure monitoring to prevent solvent leakage to exterior Bdjdsw Dddzjpfx Ab Tsk 2 double doors Comprising: - Approx. 175 m² tongue-and-groove panel walls, RAL 9002, smooth finish, with eccentric fasteners - Multiple window elements integrated into the panel walls as per specification 6 doors with windows (double-leaf, clear opening 1,800 x 2,000 mm) 1 operating room door (single-leaf, clear opening 2,000 x 2,200 mm) 6 electric door locks as described 22 filter fan units (1,140 x 1,140 mm each), with F7 pre-filter, H14 main filter, EC speed-controllable motor Air volume: 2,350 m³/h Nominal power: 350 W Sound power: approx. 55 dB(A) Approx. 40 lighting units with cover (no LED) Approx. 200 m² cleanroom ceiling, make: O – metal ceiling 1 set of suspension structure for the metal ceiling, including maintenance grid for service and filter replacement from above 1 exhaust fan with ductwork 1 switch cabinet section for control Additional option: Item 3) Additional Air Conditioning for DIG Room To achieve the specified room temperature and humidity, an additional air conditioning unit is required: - Target room temperature: +20°C ±2K - Target humidity: 60% ±10% - Control integrated into main control cabinet

Condition: excellent (used), Year of construction: 2013, operating hours: 20,900 h, functionality: fully functional, overall weight: 4,500 kg, power: 45 kW (61.18 HP), fuel tank capacity: 2,000 l, operating pressure: 10 bar, type of cooling: air, Complete compressor room Atlas Copco GA75VSD, built in 2013, 46,100 hours - 75 kW - Max. 10 bar Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, built in 2007, 21,000 hours - 45 kW - Max. 10 bar Dimensions: L205 x W100 x H180 cm Bdsdpfx Abjv Snn Io Tsk Atlas Copco FD245, built in 2013, refrigeration dryer Dimensions: W120 x D110 x H100 cm Dimensions: 2000L tank, built in 2016, height 2.85 m Incl. oil-water separator System is currently still in operation; operating hours may vary. System is fully functional and regularly maintained. Maintenance kits and oils are included. Very good condition, see pictures. A forklift is available for loading. Pickup by appointment only in 75053 Gondelsheim. Shipping via freight forwarder is possible; please include your postal code in your inquiry.