Used Painting Line for sale (19,471)

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL Dsdpfxjttlfko Af Iscn ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: ready for operation (used), total height: 1,900 mm, total length: 1,250 mm, net weight: 1,000 kg, nominal power: 3 kW (4.08 HP), total depth: 2,200 mm, Semi-automatische lintzaag Dcedpfx Afoxcqixs Ien Hydraulisch klemmen Normaal koelsysteem + verstuiveroptie Digitale uitlezing voor snijhoek Rollenbanen inbegrepen Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm

Condition: used, Year of construction: 2010, Bottling Line: Krones CSD Line Year of Manufacture: 2010 Suitable for: Carbonated Soft Drinks Currently Running: Apple Juice with Water and CO2 Container Sizes: PET 0.5 L – PET 1.0 L – PET 1.5 L Neck Formats: PCO 1810 – 28 mm / PSO 28 mm – 1810 – 1881 (Short Neck) Capacity: • 24,000 bottles/hour (0.5 L) • 18,000 bottles/hour (1.5 L) Control System: Siemens Simatic S7-series PLC Operating Hours: approx. 40,000 Krones VarioClean F AUT: Fully automatic CIP system, 4 x 5,000 L, 30 m³/h GEA TDS Processing Plant: Includes flash pasteurizer, mixer, carbonator, degasser, and tanks Preform Hopper and Feeder Conveyors: • Preform Feeding System: Krones Contifeed RS • Preform Cleaning Unit: Prejet Linear Cap Feeding System: Gassner, includes cap rinsing and sterilisation Blow Moulder: Krones Contiform S12M Ultra Clean Volumetric Filler: Krones 86-22 (Volumetric VODM-PET) with capper Filler Block Cleaning: Krones VarioDos ultra clean Date Coder: Domino DDC 3 (laser) Filling Level Inspection: Krones Checkmat Bottle Conveyors: Krones SYNCO S Bottle Leak Tester: Krones Flowliner Labelling Machine: Krones Contiroll OPP 720-15, double roll feed, hotmelt glue applicator Label Inspection: Krones Checkmat 731 EM Shrink Packer: Krones (Kettner) Variopac TFS 30 (2003) Package Conveyors: Krones Multico S Dsdpfx Aoxfg Ebsf Iecn Handle Applicator: Twin Pack Pack Coding: Leisinger Jet 3 (inkjet) Palletiser: Krones Robopox Modulpal (year 2016) Reference Code: NP 647

Condition: new, Catalog number M0297 – For the production of customized furniture – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500 mm measuring frame – Set of spacers included – Brand new machine Dcodpfx Afjxbzkwo Ien TECHNICAL SPECIFICATIONS - Number of spindles: 23 - Distance between spindles: 32 mm - Total interaxial distance: 704 mm - Maximum tool diameter: 40 mm - Maximum drilling depth: 65 mm - Max. size of workpiece: 740x3000x200 mm - Working table height: 860 mm - Table dimensions: 949x350 mm - Drilling head inclination: 0–90° - 2 independent pneumatic cylinders - Spindle speed: 2,800 rpm - Motor: 1.5 kW - Working pressure: 6/8 bar - Dust extraction port diameter: 80 mm - Machine packaging dimensions: 1115 x 950 x 1050 mm - Frame packaging dimensions: 1500x120x60 mm - Net/Gross weight: 271 kg / 301 kg Net price: 29,900 PLN Net price: 7,050 EUR, depending on the exchange rate 4.25 EUR (Prices may be subject to change with significant fluctuations) PRODUCT FEATURES The Maggi MS 704 is a multi-spindle drilling machine designed for fast production of customized furniture. The MS 704 is a compact machine capable of handling the complete production process, from drilling cabinet bodies to assembling flip-down fronts and system drawers of any brand. This drill enables comprehensive execution of all required holes in any technology: cam fittings, dowels, connectors, pilot holes for runners, shelf supports, hinge cups, and mounting holes for slides and actuators. The working table width without removing the side stops is 740 mm, so you can drill oversized cabinet components with ease. The machine features a patented 1500 mm measuring frame, allowing work independently of the 32 mm system. This gives you the flexibility to process workpieces up to 3000 mm in length. A new concept in furniture component drilling allows for quick material processing without the need for retooling. The measuring frame is a fixed part of the machine. Contrary to conventional drilling machines, the main operational axis is perpendicular to the spindle head, not parallel. The MS 704 is additionally equipped with height adjustment for the pressure beam, allowing you to process material up to 200 mm thick. The clamps are powered by independent circuits and are equipped with valves enabling safe operation—one clamp can be switched off when working with smaller elements. The MS 704 comes standard with a drill bit magazine and a set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Dsdpfxexdbwis Af Ijcn Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Year of construction: 2020, condition: used, Safe line metal detection belt Metal detector opening 450mm x 100mm See our other listings VMA Wekerom Dodpfexc Iybex Af Iocn

Condition: used, Year of construction: 1990, Manufacturer: SALICO S.P.A. Year: 1990 Thicknesses: 3-13.5mm Coil capacity: 25t Coil width:320-1250mm Direction: Left-Right Sizes of line: 17x13m Maximum external diameter: 2000mm Minimum external diameter: 700mm Minimum internal hole of coil:500mm Maximum internal hole of coils: 600mm Dsdpfx Afjurlake Ijcn Knife diameters: Max 460, Min 410mm Absolute number of cuts 15 Number of cuts with maximum thcikness 13.5mm: 3 cuts for hard material, 5 cuts for mild material.

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, throat depth: 500 mm, net weight: 1,800 kg, total depth: 2,350 mm, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Dcjdpfx Asxbui Tof Isn Length of band saw: 4200 x 34 x 1.1 mm

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 Dsdpfx Afjxd Ap Hs Iscn - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Dedpfxjd Ecncj Af Iecn Number of laser lines: 2 Weight: 485 g

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. Dcjdpfx Ajxbta Djf Ijn It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Dcedpfxjxazhto Af Ijn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty Djdpfxow Upppj Af Ijcn 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: good (used), Horizon Digital Printing Booklet Line The machine consists of the following modules: HOF-400 + CF-400 + CR-400 + AC-400+ SPF-200L + FC-200L The machine is in perfect condition, ready for production. Mileage of only 0.5 million booklets. This is one of the latest models of Horizon machines. Setting the entire machine from the desktop. Production Japan. The ideal machine for efficient production of booklets in a digital printing house. The line consists of: – Horizon HOF-400 sheet feeder – Horizon CF-400 cover feeder – Horizon CR-400 creasing machine with top/bottom trimmer – Horizon AC-400 accumulation module – Horizon SPF-200L sewing and folding unit – Horizon FC-200L front trimmer – LC-200L delivery Horizon HOF-400 – Speed: Up to 45,000 sheets per hour – Maximum stack height: Sheet feeder: 620 mm; Cover feeder: 200 mm – Minimum sheet dimensions: 203 x 203 mm Horizon SPF-200L Touchscreen, colour display with a diagonal of 10.4” Non-stop work thanks to the function of ejecting incorrectly collected sets Max format: max. 356 x 610 mm; Min format. 120 x 180 mm Max speed 4500 booklets/h Weight 500 kg wire sewing folding two Hohner 43/6 s heads (max.4) Dedpfx Aewt Stief Iecn Ability to save up to 200 jobs to the machine’s memory. The machine has a block sewing module. Horizon FC-200L Cutting thickness 4-5 mm power supply 230 V Weight 244 kg Touchscreen panel for quick change of formats. With one click we retool the machine to other format. The machine comes with: LC-200 delivery, tools, spare parts, documentation.

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator HEUFT bottle inspector X-ray for bottle bottom inspection Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml Dcedpfx Aeuhzlaof Isn User manuals and wiring diagrams present

Condition: new, New rotary lobe pump, rotary pump with electric gear motor Hy-Line Rotary Lobe Pump, industrial pump Hygienic rotary lobe pumps with stainless steel multi-lobe rotor Manufacturer JABSCO-by-Packo HP Hy-Line Type: LH76R B012& (serial no. 44927) Year of construction 2018 Delivery rate: approx. 73 m³/h Delivery rate per revolution: 3 liters/rev Delivery rate at 407 rpm gearbox speed: 1221 liters/min. Delivery pressure: max. 5 bar Rotor speed: max. 600 rpm. Pump inlet connection diameter: 152 mm Pump outlet connection diameter: 127 mm Weight of the pump unit: 165 kg SIEMENS electric motor with gearbox Type: RX 97 DRN180M4/TF Mains connection: 400 Volt, 50/60 Hz Drive power: 18.5 kW Motor speed: 1781 rpm. (specified at 60 Hz) Gearbox speed: 489 rpm. (specification at 60Hz) Motor speed: 1480 rpm. (at 50Hz) Gearbox speed: 407 rpm. (at 50Hz) Gear ratio: 3.64 Output torque: 360 Nm very good condition - as good as new - unused from stock Application: Conveying of: Polymers paper coatings Soaps and surfactants Paints and dyes Pharmaceutical applications Food applications 2 pieces available Dedpfx Asitv Rlsf Iocn Price per piece

Condition: refurbished (used), ROLLFORMING LINE Dcjdeg Rkv Ejpfx Af Isn

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. Dcodpjp T Tghsfx Af Isn A Weigh bagging system can be added to the grated cheese line

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Dcodpfx Ajw A Ng Eef Ien Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, material thickness: 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Dedpfx Aev Awgujf Iscn Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Preform feeder Compressor for chiller moulds MTA Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog KAESER high-pressure compressor Dcodpfjq Ttuqjx Af Ion Code: NP 537

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Dcodjg Atrvjpfx Af Ien

Condition: new, functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- 🏗️ Wide Range of Applications Dcsdpfxeq Nywxo Af Ijn Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. Dedpfx Aeq Nxrxef Ijcn 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Dsdpfjq N U Duex Af Iocn Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.