Used Orkel Mp 2000 for sale (11,020)

Condition: good (used), load capacity: 2,000 kg, Welding turntable, 2000 kg load capacity Diameter approx. 1200 mm Height approx. 450 mm Infinitely variable speed 0.03–2 rpm Very robust Comes with control panel and foot pedal. Dcodpewtqpvjfx Ac Nsc

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Protec KT, load capacity 2000 kg Capacity horizontal: 2000 kg Capacity tilted: 2000 kg Stepless speed adjustment from 0.05 to 0.5 rpm (conversion on request at extra cost) With dual foot remote control Dedpfx Aowtrpkjc Necc With hand remote control with digital display 380V Clamping plate diameter: 1300 mm Height (horizontal): 1250 mm Height (tilted to center): 1080 mm Length: 1600 mm

Year of construction: 2022, condition: as good as new (ex-display), 2000 Kg load capacity welding turntable, height adjustable Complete set speed infinitely variable from 0,05 to 0,7 rpm Dedpfxjk Adhuo Ac Nscc diameter rotary table 1200mm Inclination from 0 to 120 Height adjustment from 1450mm to 2050mm hand and foot remote control

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding rotary table 2000 Kg load capacity with hand and foot remote control diameter 1200 mm Dcodpfogfqk Tex Ac Noc Bore 100mm height 580mm speed stepless 0 - 0,6 rpm Motor AC 380 V

Condition: used, Used Renishaw MP3 touch probe Tool taper MAS BT 50 Dcjdpfx Aoyddrwoc Nsc

Condition: used, Used Renishaw MP3 touch probe Tool taper CAT 50 Dodpfxsyddrqe Ac Nscc

Condition: used, Used Renishaw MP3 touch probe Dedoyddrdspfx Ac Nscc Tool taper CAT 40

Condition: used, Used Renishaw MP10 touch probe Dcedjyddq Tepfx Ac Nsc Tool holder: capto C6

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) Dcsdpfx Aex Imrcoc Nsc • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Condition: used, mileage: 70,060 km, power: 75 kW (101.97 HP), first registration: 01/2011, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,670 kg, empty load weight: 3,230 kg, tire size: 265/70R15, wheelbase: 1,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 1, Equipment: additional headlights, air conditioning, cabin, Vehicle location: Bovenden, Kz. Haus, air conditioning, automatic transmission, high beam headlights, rotating beacon, leaf spring suspension, sweeper brush, green environmental sticker Wheelbase: 1900 mm. Construction: Sweeper with 3 front brushes. Operating hours approx. 8609! Working hours approx. 5444! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Dcedpjwkixdefx Ac Njc - .

Condition: used, Year of construction: 2000, Overview The following 2 component mixer was built in 2000 by the German manufacturer Krones. The machine is available immediately in its current good condition.  Technical data  capacity 45,000L/h 2 components  Anton Paar densimeter  suitable for carbonated drinks year of manufacture: 2000 SIEMENS control Djdpfx Aoyc U Utec Necc

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t Dodpfx Aju Sbkgsc Necc dimensions of the machine ca. m

Year of construction: 1963, condition: used, max. wheel diameter 2000 mm gear width 0 mm max. module 0 Weight ca 700 kg dimensions of the machine ca. 2x1,2x1,5 m Dcedped Ngrpefx Ac Nsc uncomplete machine body with drive motor. drive unit fully functional. Without grinding unit.

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, For Sale: WAGNER WDC 560×2000 Lathe – 2012 General Description: Brand: WAGNER (Germany) Model: WDC 560×2000 Year: 2012 Type: High-precision CNC lathe Control: FANUC Oi-TD Applications: Machining of cylindrical, conical, threaded parts and large-sized components for the mechanical engineering, automotive, aerospace, or energy industries. Technical Specifications: Dcsdpfjyc Ticsx Ac Njc • Maximum turning diameter: 560 mm • Maximum distance between centers: 2,000 mm • Center height: approx. 280–300 mm (to be verified per machine) • Cross travel: approx. 550 mm • Spindle: FANUC CNC, variable speed depending on configuration • Tailstock and live center: for machining of long and precise parts • Chuck: 4- or 6-jaw (depending on configuration) Equipment and Features: • FANUC Oi-TD CNC: flexible programming and automatic cycles • Cast-iron guideways for rigidity and precision • Integrated lubrication system and chip tray • Toolholder and modular turret (depending on configuration) • Possible accessories for threading, taper turning or long workpieces Dimensions and Weight: • Machine dimensions: approx. 5.5 × 2 × 2.2 m (L × W × H) • Weight: approx. 7–9 tons Key Highlights: • Large capacity: 560 mm turning diameter × 2,000 mm between centers • Reliable and widely used FANUC CNC, easy for maintenance and programming • Robust and precise machine, suited for demanding workshops

Condition: new, - 3-axis position indicator - magnetic and manual spindle brake - 3 jaw chuck ø 250 mm - 4 jaw chuck ø 320 mm - Z-axis stop - fixed & rotating lunettes - Multifix type B including 4 holders - faceplate ø 430 mm - lighting system - coolant system Specifications - Distance between centers: 2000 mm - Swing diameter over bed: 600 mm - Swing diameter over slide: 360 mm - Swing diameter in cutout: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle taper: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 levels) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical pitch: 8 - 56 dp (33 steps) Dodpfx Aovxgtioc Njcc - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Cross feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock quill diameter: 65 mm - Tailstock quill mount: MK5 - Tailstock quill stroke: 120 mm - Motor power: 7.5 kW - Voltage: 400 V - Dimensions WxHxD: 3460 x 1800 x 1150 mm - Weight: 2250 kg

Condition: refurbished (used), Year of construction: 2007, Kuka tested / overhauled KRC2 ED05 KR240-2 2000 ca 6500h of work! working space: 55,0 m3 maximum reach 2.700 mm 2.900 mm 3.100 mm Nominal payload 240 kg Additional load arm/swing arm/carousel 50/100/300 kg Additional load arm + swingarm, max. 100 kg Maximum total load 640 kg Number of axles 6 Floor mounting position Position repeatability* ±0.06 mm Control KR C2 edition2005 Weight (without control), approx. 1,267 kg 1,277 kg 1,285 kg Temperature during operation +10 °C to +55 °C Protection class IP 65 Dedpfx Aepa Nxwjc Nscc Footprint of robot 1,006 mm x 1,006 mm Connection 7.3 kVA Noise level < 75 dB Axis data range (software) Speed at nominal payload 240 kg Axis 1 (A1) ±185° 86°/s Axis 2 (A2) 0°/-146° 80°/s Axis 3 (A3) +155°/-119° 79°/s Axis 4 (A4) ±350° 100°/s Axis 5 (A5) ±125° 110°/s Axis 6 (A6) ±350° 184°/s

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Dcsdpfx Aswgbuijc Noc Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: new, Center height: 330 mm Center width: 2000 mm spindle bore: 85 mm Dedpfx Acem E Umqj Nocc gear stages: 12 spindle speed range: 15-1500 rpm drive power: 11 kW weight approx. 2135 kg Equipment a. o.: hardened and precision ground Z-axis guideways Turcite coatings (on mating surface) of tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center punch Set of machine set-up plates

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec FPS-25/20U2 2011 Dcsdovy Ef Hspfx Ac Nsc Lisec gas press 2000 x 2500 mm Right -Left S-IGL-1892

Condition: excellent (used), Max. diameter with tailstock: 1450mm Max. diameter without tailstock: 2100mm Dedpfx Aoyghraec Necc Max. module: 30

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Kleindienst. The machine was continuously maintained and is already dismantled and stored. Technical data  Capacity: 18,000 bottles/h  Number of closing heads: 24 Formats: 0,5 l Bügel Lochmund 0,33 l Bügel Kropfhals  Working direction: clockwise Djdowkq Iajpfx Ac Njcc

Condition: used, Year of construction: 2000, Overview This complete filling line for non-returnable PET bottles was manufactured 2000 mainly by the german manufacturer KRONES. The line was running as a returnable bottle filling line before and was changed to non-returnable in 2007. The line is designed for high-capacity beverage production, handling up to 36,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.    Technical Data Capacity: 36,000 bph (at 0,33L) Bottle Formats: 0,33L and 0,5L Packaging formats: shrink wrapping with carry handle  Application: CSD Hygienic design condition: installed, good technical condition   Scope of Delivery Preformfeeding | SIG Coroplast/KHS | 2007 Blow Molding Machine | SIG Coroplast/KHS | Blomax 20 | 2007 Compressor | LMF | 2007 Rinsing | Krones| Variojet | 100 Stellen |  2000 Filling/Capping | Krones| Sensometic VP-IM | Capacity: 36.000/h | 2000 Cap Detection | Heuft | 2000 Drying machine | Krones| 2013 Labelling machine | Krones| Solomatic 1200-25-6-5-160 | 2013 Shrink Packer (2x) | Kettner | TFS 60 | 2000 Tray Packer | Kettner | 2000 Tray coding (2x) | Bluhm Linx 8900 | 2019 Handle Application | PAD/Kettner | 2000 Palett wrapper (2x) | Kettner/Krones | 2000 Palett labelling | Logopak | 2000 Loader | Kettner/Krones | 2000 Mixer | Krones/Anton Paar | 2000 KZE | GEA Tuchenhagen | 2000 Dedpoyb R U Hsfx Ac Nocc

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Dcsdpfowq Sfgex Ac Noc

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Rico. The machine was running until January 2025 and is now stored in the company. Technical data  Capacity: 20,000 bottles/h  Formats: 0.33 l Swing-top glass bottle 10 capping stations  Running direction: clockwise Operation via OP17 Control system: Siemens S7  High pressure injection system Locking pressure control Dcedpfjwhwtqjx Ac Noc

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Djdpfxswh U Avo Ac Nocc