Used Orkel Mp 2000 for sale (10,877)

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used SCHRÖDER motorized guillotine shear, model MHSU 2000/3,0, year of manufacture 2007 Working range: 2,000 x 3.0 mm Csdpoyfmgtjfx Ac Nopu Blades suitable for cutting stainless steel Extended angle stop 1000 mm on the right Extended pull-out support table Manual rear gauge, can be operated from the rear (500 mm) Rear area safeguarding with light barrier and side protection grid Foot switch Machine is located in our warehouse in 71334 Waiblingen-Beinstein and is immediately available.

Condition: used, mileage: 439,057 km, power: 320 kW (435.08 HP), first registration: 06/2011, fuel type: diesel, overall weight: 35,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,500 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: air conditioning, cabin, differential lock, trailer coupling, Vehicle location: Belgium 1, sleeper cab, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, 16-speed gearbox, differential lock, rotating beacon, leaf suspension, trailer coupling (air & light connection), foldable underrun protection, green environmental sticker. Wheelbase: 4500 mm. Disc brakes on front and rear axles, 50 mm trailer coupling! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, interim sale and errors reserved! Cpjdpjyg N Uvofx Ac Nsu

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Csdpeuanqaofx Ac Njpu Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Cjdpfx Aeyg Itkec Nepu Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Year of construction: 2007, Immediately available ex works: CNC Vertical Machining Center CHIRON Model: Mill 2000 highspeed Year of manufacture: 2007 Control: Siemens Sinumerik 840 D Clamping area: 2600 x 550 mm Travel (X/Y/Z): 2000/500/550 mm Reinforced spindle drive: 47.2 kW, 17 kW at 100% duty cycle Spindle speed: 20 – 12,000 rpm Spindle taper: SK 40 2 x 4th axis with horizontal faceplate Tool changer: 40 positions instead of 24 Drilling capacity: 45 mm, Tapping: M 33, Milling capacity: 700 cm³/min Fixture table: 100 mm deeper Cpsdeyg Epiopfx Ac Nou Through-spindle coolant (IKZ) Coolant unit HL 450/900 Chip conveyor Rotary table package with horizontal faceplate, fully assembled NC rotary table, 280 mm diameter Remote diagnostics and teleservice Portable mini handwheel High-speed package on all axes, rapid traverse 60 m/min 2 x extraction units as air cleaners Probe for automatic in-machine measurement Renishaw probe package OMP 40 X-axis bellows in stainless steel Central partition wall Numerous tools and holders Weight: 13.5 t Offered at EURO 17,500.— plus VAT ex works.

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex-location: Hydraulic Guillotine Shear Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Cpjdpfx Aceyg Enfo Nju Material thickness: up to 12.5 mm Electric backgauge: from 5 to 1000 mm Drive power: 15 kW Weight: 11 t At a price of EUR 3,750 plus VAT ex location

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Cjdpfxjyfh Ulj Ac Nspu Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Hours: 34535 Available 3 units (2020-2019)

Condition: used, Year of construction: 2018, control CELOS / F31iB5 / Mapps 4S max. turning diameter 670 mm turning length 1.538 mm bar passage max. 81 mm x1 axis 675 mm y-axis mm z1 axis 1.562 + 164 mm b-axis ° a-axis 1.542 mm x2-axis 200 mm y2-axis + / - 40 mm z2-axis 1.542 mm max. turning speeds 4.000 U/min power capacity 26 / 22 kW spindle passage Ø 91 mm Cpjdpfjyfh R Hex Ac Nou max. turning speeds 5.000 U/min power capacity 22 / 18,5 kW spindle passage Ø 73 mm turning speed range 0 – 12.000 U/min power capacity 28/ 23 kW tool taper Capto C6 number of tool places 76 Pos. max. tool diameter Ø 70/ Ø 130 mm max. tool length 400 mm max. tool weight 8 kg Number of tool holders 10 pos. Shank length for square tool 20 mm Shank diameter for boring bars Ø 32 mm power capacity 5,5/ 5,5/ 3,7 kW torque 16,9/ 13,1/ 8 Nm x-axis 50 m/min y-axis 40 m/min z-axis 50 m/min A-axis 36 m/min x2-axis 25 m/min y2-axis 18 m/min z2-axis 40 m/min b-axis 100 U/min Hollow clamping device Ø 67 mm Number of working hours ca. 23.250 h spindle hours ca. 8. h Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Technische Merkmale & Zubehör: - Kitagawa- Hohlspannfutter an Haupt- und Gegenspindel - Fußschalter (doppelt) für Spindel 1 und Spindel 2 - Vollindexierung der Werkzeugspindel - Revolver- Reitstockfunktion - Geeignete Kühlmittelart: Wasserlösliches Kühlmittel - Späneförderer - Kühlmittelsystem 70 bar, Fabr. Hydrajet - Blasluft an der Spindel 1 und Spindel 2 - Automatischer Messarm an der Hauptspindel - Werkstückauswurf an der Spindel - Teileentlader - Vorbereitung für Stangenlader - Schnittstelle für Nebelabscheider - 2 Stk. RotorClear - Signalleuchte 4 Farben - Multi-Dry-Filter - Automatisches Antasten und Werkzeugkorrektur - Speichererweiterung - Zyklus für Ebenentransformation - Kühlmittelspritzpistole Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 105033, load capacity: 2,000 kg, overall weight: 2,200 kg, input voltage: 400 V, power: 2.9 kW (3.94 HP), We offer this used Gruse EDKT 2000 scissor lift table, year of manufacture 2011. Type: EDKT 2000 Year of manufacture: 2011 Equipment No.: 25033 Project No.: Load capacity: 2000 kg Weight: 2200 kg Operating voltage: 400 V Control voltage: 24 V Power: 2.9 kW Protection class: IP54 Cpjdjyg Dukjpfx Ac Nou If you have any questions or need more information, please feel free to send us a message or call us.

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg Codpewg Hr Tjfx Ac Njpu S&S frame press Bavaria 2000 L ----- NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder Article x slanted window control for ...

Condition: used, mileage: 28,000 km, power: 353 kW (479.95 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 14 m³, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal reference: #349 MAN TGS 26.480 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with high-performance Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and flushing operations, combining high suction capacity, efficient water recycling, and robust high-pressure technology in a durable and practical configuration. With a 14,000 l tank capacity, 3,000 m³/h vacuum performance, large-diameter DN150 suction pipe, and a powerful Uraca high-pressure system, this unit is ideally equipped for demanding municipal and industrial applications. Extensive control, comfort, and safety features ensure efficient operations even during extended deployments. Superstructure * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling system * 14,000-liter tank capacity * 1,000 liters of fresh water * 5,000 liters of flushing water * 8,000 liters of sludge capacity * Tank discharge by 45° tipping Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * Approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 – 413 liters at 175 bar * Approx. 180 m HD hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional Freshwater System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 10 m pressure hose DN10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HD booms * 5-liter warm water hand wash system Cpjdpfx Aoyg Anpec Nju * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two hinged doors – both sides * Hose storage * Pump compartment sound insulation extended * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,030 kg * GVW: 26,000 kg * Length: 9,990 mm * Height: 3,700 mm * Width: 2,550 mm Chassis * MAN * TGS 26.480 * 6x2 * 353 kW / 480 HP * EURO 6 * Automatic * Air conditioning * Self-propelled sewer cleaning machine Summary: A highly capable MAN TGS 26.480 6x2 with Wiedemann Super 2000 water recycling system, powerful vacuum and high-pressure technology, and well-designed operator and comfort features. The ideal solution for professional sewer cleaning operators who value efficiency, high performance reserves, and robust technology. For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: Specifications, prior sale, and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively in accordance with our terms and conditions and under exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement Csdpfx Acjx D D Iko Nspu • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V Cjdpfox D Dmysx Ac Njpu • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Cpodpfx Acjt Hg Hue Nju Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Cedpfx Aoxwmbmoc Nepu

Condition: refurbished (used), Year of construction: 1997, operating hours: 33,328 h, functionality: fully functional, machine/vehicle number: W12599 Nr.563, overall weight: 9,500 kg, number of blades: 104, total length: 4,520 mm, total height: 2,400 mm, rotor length: 1,500 mm, power: 75 kW (101.97 HP), input voltage: 400 V, We offer this refurbished LINDNER Micromat MS 2000 single shaft shredder, year of construction 1997. Cpodpfx Acoygvc Te Nsu manufacturer: LINDNER model: Micromat MS 2000 year of construction: 1997 condition: refurbished category ID: 2097 type ID: 2590 type: single shaft shredder If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm Cpedpfxoydpvns Ac Nsu -Transport dimensions: 7000/2000/H730 mm -Weight: 1940 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Cpedjydkyzjpfx Ac Nsu Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm Cpjdpfx Acsydi A Ie Nju -Total weight: 228 kg

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7015/2000/H730 mm -Load capacity: 16 t -Tires: Solid rubber dual tires, see photos -Overall dimensions: 8675/2000/H730 mm Cpsdpfx Acsydicze Nou -Transport dimensions: 7015/2000/H730 mm -Weight: 1940 kg

Condition: used, mileage: 70,060 km, power: 75 kW (101.97 HP), first registration: 01/2011, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,670 kg, empty load weight: 3,230 kg, tire size: 265/70R15, wheelbase: 1,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 1, Equipment: additional headlights, air conditioning, cabin, Vehicle location: Bovenden, Kz. Haus, air conditioning, automatic transmission, high beam headlights, rotating beacon, leaf spring suspension, sweeper brush, green environmental sticker Wheelbase: 1900 mm. Construction: Sweeper with 3 front brushes. Operating hours approx. 8609! Working hours approx. 5444! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Cpodpjwkixdofx Ac Nsu - .

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Codpfjydfhyex Ac Nspu Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW Codpfswihxajx Ac Njpu 2 to 10-Ton Capacity Available Upon Request

Condition: used, Used Renishaw MP3 touch probe Cedpsyddrwefx Ac Nspu Tool taper MAS BT 50

Condition: used, Used Renishaw MP3 touch probe Cpsdpfx Acoyddrqe Nsu Tool taper CAT 50