Used Orbital Welding Machine for sale (92,775)

Condition: good (used), -2 phases 400V - Workpiece clamp bottom-top Hfodpfxepy Dxvo Afien -Pneumatic clamping - 8 welding heads with pneumatic clamping -2 welding transformers It can be visited and tried out!

Condition: used, Lot of 5 units WIG welding machines ESS model Thyrotig - Thyroplasmma 250 (DC) WIG welding machines in need of repair Year of manufacture: 1991 to 1994 Output: 250 Amp. = 60% duty cycle, 195 Amp. = 100% duty cycle Current type: DC Mains connection: 400 Volt, 50 Hz, 32 Amp plug - High-voltage ignition - 2-stroke and 4-stroke operation modes - Water-cooled - Some parts missing - Delivered without torch sets/hoses, scope of delivery as pictured Space requirements (L x W x H): 1200 x 570 x 920 mm Hodpfx Ajw Hhbisfiofn Weight per welding machine: 255 kg Total weight for all 5 machines: 1,275 kg Three machines are operational. Two were kept in storage as parts donors. The units are no longer tested and are being sold as in need of repair.

Condition: ready for operation (used), Herrmann HIQ Dialog 1200 SpeedControl Ultrasonic Welding Machine Generator rated power: 1200W Operating hours: 8704 h Ultrasonic active operating hours: 3 h Weldings performed: 61680 Hfedswcb Diepfx Afien Year of manufacture: 2010 Cylinder diameter: 32mm Piston rod diameter: 12mm Cylinder stroke: 100mm You are welcome to visit us for a viewing. We can arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0000243380, type of input current: DC, Very good welding machine from EWM. Was used as a replacement unit in our operation, therefore only lightly used. Here are some details: • TIG and MMA inverter DC welding machine Hfodpfoxfgg Sjx Afisn • Mobile, water-cooled, 5m power supply cable • Faster and higher-quality welding thanks to EWM activArc technology • COMFORT control: proven convenience; all essential welding parameters directly accessible, up to 8 JOBs (welding tasks) can be programmed by the user for recurring welding operations • Maximum efficiency and outstanding quality thanks to fully digital inverter welding technology • Suitable for production and repair work in the food and chemical industry, pipeline, vessel, plant, vehicle, and mechanical engineering, as well as robotic applications • Intelligent enclosure design with optimized airflow for better cooling performance and reduced internal contamination • Excellent mobility: easy to move thanks to large wheels, fits through standard doors, and easy loading/unloading due to equal wheel track width • TIG welding with HF ignition and Liftarc • Spot mode, 2-stroke, 4-stroke, tacking, pulsing, and kHz pulsing (2.5 kHz) • Adjustable parameters: start, welding, downslope, and end current; pre- and post-gas flow time; up and down slope time; pulse and pause times; ignition management • MMA welding: adjustable hot start current and time, arc force, anti-stick • Digital display for welding voltage, current, and parameters • High-performance cooling system with centrifugal pump and large 12-litre tank, pressure switch, pump and fan are temperature-controlled

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, OTC CPTX-i 400 2w 30-400 AMP Synergic Water-cooled Fixed Programs Steel - Stainless steel Weldable Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Hodpfxsxcam Tj Afijfn OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 1996, condition: good (used), machine/vehicle number: 01049, Offer 22461 Technical data: - nominal power at 50% ED 35 kVA - max welding power 75 kVA - throat adjustable 280 to 600 mm - stroke 5 to 50 mm - Welding values sheet steel approx. 4 + 4 mm - electrode force adjustable up to 44,5 daN - cooling water quantity 4 l/min - connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm Hjdpfx Ajimbmrjfiofn - weight approx. 220 kg - with: - single-phase control T 90 Mark II - foot switch

Condition: repair required (used), Full: 63 KVA Arm design: 400 mm The machine is currently not working (control panel missing) Hodpfx Afspy Dx Ijijfn

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 50 SC AC Resistance Welding Machine Machine No. 0723122BA0001 Year of Manufacture 2007 Power at 50% duty cycle: 50 kVA Power at 100% duty cycle: 35 kVA Maximum welding power: 156 kVA Thrust 350 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Max. cylinder stroke: 80 mm Max. electrode force: 730 daN (at 6 bar), continuously adjustable Operating air pressure: 3.5 to 6 bar Mains connection: 400 volts, 50 Hz Connected load: 117 kVA / 100 amps / Cable cross-section: 3 x 35 mm² - Welding control: ARO Micro 2X16 III Version 10T16P (6 times - 16 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guide - Single-stroke welding cylinder - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently attached to the machine - PC interface RS 485 - Spot weld counter - Operating instructions and electrical diagram included Space requirement L x W x H 650 x 950 x 1770 mm Weight 330 kg Good condition Hjdpov Hruhefx Afiofn

Condition: used, current capacity . kVA throat . mm contact pressure capacity . kp dimensions ca. 650 x 800 x 2050 mm weight of the machine ca. 140 kg This spot welding machine with state-of-the-art Inverter 125L technology enables the welding of high-strength sheet metal and all other steel sheet parts. The multi-purpose machine with water cooling is ideal for all intensive Hfsdpfx Afsxb Ef Soien work under heavy loads. DESCRIPTION: - Welding machine for all spot welding and alignment work - Pneumatic clamping tongs with strong tension (strength at electrodes) 550 N at 7 bar with electrode arms of 100 mm - 2.5 m water-cooled cable for the clamp and 3 m air-cooled cable for the gun - Current compensation - Telescopic arm with equalizer - Pneumatic clamp with remote control - 78 welding programs

Condition: new, Year of construction: 2025, MDP-01 SPOT WELDER 10 kW High-performance transformer 5 levels of power regulation Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle The range of welded sheets: 0.4 + 0.4 to 2 + 2 mm Width: 490mm Length: 1010mm Height: 1100mm Hodpfx Aefwxr Tefiefn Weight: 130kg Power supply: 380V / 3phase / 10kw

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: Hedpfx Afsi Ab Unoiefn - Barrel width 1 - 15 mm - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Hsdpfxeh Rizze Afiofn Tip: 1300 W / 20 KHz

Condition: used, Clamping plate, machine table with T-slots made of steel Clamping table Clamping plate, clamping table, machine table HOMEMADE can also be used as a straightening plate or welding table Table surface: 2150 x 1040 mm Construction height: 200 mm - Top and bottom sides machined in parallel, surfaces planed - Table plate L x W x H = 2150 x 1040 x 65 mm - Table plate provided with several symmetrical bores Hjdpjtqgnysfx Afiofn Table plate with M16 and M24 threaded holes, M16, M24, M16, M24, etc. Bore spacing lengthwise: approx. 250 mm Bore spacing crosswise: approx. 255 / 165 / 255 mm - 6 pieces double T-beams welded onto the steel plate Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Clearance between double T-beams: 50 to 55 mm Weight: 1730 kg Good condition

Condition: new, Year of construction: 2025, MDPE-02 SPOT WELDER 20 kVA High-performance transformer 5 levels of power regulation Electronic current and time control Possibility to work with 2 x 230V (380V) power supply Bottom sliding handle The range of welded sheets: to 3 + 3 mm Width: 620mm Length: 1100mm Height: 1200mm Weight: 230kg Hodpfof Eyu Aex Afisfn Power supply: 380V / 3phase

Year of construction: 2003, condition: used, machine/vehicle number: 06H 127; Lg-Nr. 06565, Technical data: - water-cooled DC-AC equipment TIG TR 4, - water-cooled MIG-MAG equipment DV - IV - XT - E. Welding machine STH 400 - for welding of: Stainless steel , steel , aluminium , etc. - 16-fold welding program preselectable with: - - Preset: E-welding , TIG - welding AC / DC, MIG-MAG welding - Digital Volt + Ampere display - Welding current infinitely variable from 10 A / 15 V to 400 A / 34 A - max. welding current max. 400 A 60% ED - 315 A 100% ED - Power consumption 400 V / 43 A / 16 kVA - pulse device - Welding current increase and decrease adjustment - Backfire adjustment Hjdpfx Afscinmbeijfn - Gas pre - post current adjustment - water-cooled WIG - hose package 8 running meters, light version - E.- welding cable + earth cable - water cooled MIG - MAG hose package - Separate wire feeder case DV - IV - XT for MIG - MAG welding - 4 rolls - wire feeder - Intermediate welding set - wire feed case 4500 mm - pressure reducer - E. - welding cable + earth cable - Space requirement approx. W 550 x H 1650 x D 1100 mm - Weight approx. 350 kg

Condition: good (used), Power: 50 kVA Hedjpy Dydopfx Afijfn Arm design: 520 mm

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Hjdpfx Afsrtvi Ueiofn Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0523813, Offer 22728 Technical data: - Welding current max 335 A 35% ED - max 260 A 60% ED Hfodpfx Afjrm Rpvoien - max 200 A 100% ED - Welding current is regulated in 36 fine stages from - 40 A - 335 A - 2 rollers wire feed - Roller wire feed infinitely variable - 2 cycle - 4 cycle regulation - Spot welding + interval welding - Air-cooled hosepack 4 running meters - Ground cable - pressure reducer - 400 V connection - Space requirement approx. W 550 x H 1000 x D 1000 mm - Weight approx. 150 kg

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode Hodpfx Afsrtvi Reijfn - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 99 C 70090, Offer 19013 Technical data: - Nominal power at 50% duty cycle 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Welding values for sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm distance 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water quantity approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg Hfodpfx Ajv Du Daofien - with: - separate control unit AKZENT T 504-1 - Suspension bracket with gimbal ring

Condition: good (used), Year of construction: 2007, machine/vehicle number: 05542, Offer 25128 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 68 kVA - Reach adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding values: sheet steel approx. 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar Hfjdpfx Afewn Emleion - Cooling water quantity: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling device

Year of construction: 2010, condition: good (used), Offer 23026 Technical data: - Barrel width 1 - 15 mm Hfodpfei D D Ugex Afien - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ø 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg Hfodpfed Af Shox Afion

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Technical data: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm Hjdpfx Asv Hzq Ssfiefn - Weight approx. 150 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 193567, Offer 24597 Technical data: Hfodpfx Afsvxhlyoion - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - 1 piece earth cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg