Used Seam Welding Machine for sale (84,370)

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Dkjdpfeu Nkxhex Afnog Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand Dksdpeiby Naofx Afnjg and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Condition: new, Year of construction: 2025, Technical Specifications: Model: KMD20 Operated: Motorized Pressure Input: Up to 6 bar Power: 20KVA Welding Capacity: 1.5+1.5mm mild steel Maximum Force(6 bar): 115daN Input Voltage: 380V/50Hz Protection Fuse: 63A Seam Weld Arm Length: 200mm Cooling: Water cooling (8L/min) Power Input Cable: 3m Protection Class: IP21 Dkedpfx Aetmfzusfnjg Power Level: %0-99 power adjustable by controller Weld Time: 1-99 Cycle adjustable by controller Dimensions (W/L/H): 450m x 1000mm x 600mm Weight: 203Kg

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Dedjw S Exuepfx Afnokg Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 2012, condition: ready for operation (used), The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. Dksdpfjpu A D Usx Afneg

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Weld control: Filius classic 128 program --- Extra Equipment: - foot pedal - flow monitor - main switch --- Dodpfx Afswqmrzenjkg Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Dedpfetxl Ivex Afnskg Example photo Machine is still being refurbished

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. Dksdju Tqhhepfx Afnjg With kind regards T. Becker

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Dkedpfou Izq Sex Afnjg

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE Dksdpsdx Suhofx Afnjg The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Dksdpouxbx Djfx Afnog

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a R-PRO 25 standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 Dsdpfehpuhtsx Afnskg DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) - Ribbing Attachments (Optional) - Dijital Encoder (Optional) - Circular Saw (Optional) - Guillotine Shear (Optional) - Sliding Shear (Optional) Please contact us for more information and prices...

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable Dkodpfx Asxy Hqtjfneg -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Dedoxfrv Eopfx Afnjkg Gas clean

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Dkodpfx Afowbixrenjg ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 750 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: Dkedpfjwzzlwox Afnjg “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Please contact us for more information and prices.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 Dedpovgdt Asfx Afnjkg U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079

Condition: excellent (used), Year of construction: 1989, wire diameter range: 1,8 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: 0 - 10.000 mm output: max. 30 rings/min welding capacity: 10 kVA Dsdpsf Tymbofx Afnekg

Condition: good (used), Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter Dedpfx Aji Agxusfnekg -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable -Dimensions: 560/290/H500 mm -Weight: 44 kg

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Dkedpfxolddxhs Afneg Coil joining machine. With Fronius Magic Wave 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip length: 15 – 80 mm. Strip width: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min Dodpevbgxqofx Afnskg

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available Djdpfx Aowl Dptjfnekg -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: used, This is an SKS LSQ5X welding power source Included in the scope of delivery 1x LSQ5X welding power source Dksdsuxlz Aepfx Afnsg 1x SKS Frontpull 8 (23°) 1x SKS Power Feeder PF5 1x Powerclutch HD collision protection 1x Q80 welding process controller

Condition: good (used), Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 Dedpfoqvp Nksx Afnokg -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder TYPE: MSV 08 Dedpfx Afsvgd Efsnokg