Used Projection Welding Machine for sale (85,906)

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock Iedpfxexyqn Ao Adnsa

Condition: good (used), functionality: fully functional, Projection welding machine from Messer Griesheim, modernized by Schmidt & Bender. Fully functional. All documentation is included. The cooling unit is included, but it has a defect. It may only be a minor issue and hasn't been examined in detail. Iodpfowa Sqnex Adnoa

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 50 SC AC Resistance Welding Machine Machine No. 0723122BA0001 Year of Manufacture 2007 Power at 50% duty cycle: 50 kVA Power at 100% duty cycle: 35 kVA Maximum welding power: 156 kVA Thrust 350 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Max. cylinder stroke: 80 mm Max. electrode force: 730 daN (at 6 bar), continuously adjustable Operating air pressure: 3.5 to 6 bar Mains connection: 400 volts, 50 Hz Connected load: 117 kVA / 100 amps / Cable cross-section: 3 x 35 mm² - Welding control: ARO Micro 2X16 III Version 10T16P (6 times - 16 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guide - Single-stroke welding cylinder - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) Iodpev Hruhofx Adnja - Electric foot switch - Control cabinet with control system permanently attached to the machine - PC interface RS 485 - Spot weld counter - Operating instructions and electrical diagram included Space requirement L x W x H 650 x 950 x 1770 mm Weight 330 kg Good condition

Condition: excellent (used), Combined spot and projection welding machine Brand: DALEX Model: PMS 11-4, Version "B" Throat depth: 350 mm Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15–4.33 V Electrode force: 190–1140 daN with 4-position switch Mounted control cabinet according to VDE 0100 with main switch Synchronous welding control with monitoring function MPS 8043-1 IQ1 Selector switch for operation with two-hand safety console and foot pedal Iodpfx Adswz Rz Isnja Sample photo Machine currently under refurbishment.

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine Isdpfxehx E T Ue Adnea -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Condition: used, Year of construction: 2001, - Rated power 100 kVA - Connected power 275 kVA - Incl. HELLER cooling unit - Weight approx. 800 kg Iodpswgb I Aefx Adnja

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Iodpfxev Dxm Ss Adnsa Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: excellent (used), Projection welding machine Brand DALEX Type PM 32-5 Rated power at 50 & duty cycle: 160 kVA Secondary short-circuit current: 80 kA Secondary open-circuit voltage: 9.75 V Electrode force: 215-1,290 daN Single-stroke cylinder - electrode stroke 100 mm Throat: 250 mm with attached control cabinet according to VDE 0100 Main switch Ijdpfxswhz Ilo Adnsa Synchronous welding control MPS 200 Example photo Machine is currently being refurbished

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Isdpohpf Iyofx Adnja Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: excellent (used), overall weight: 955 kg, projection welding machine execution B/DHZF projection 350 mm Make DALEX Type PMS 34-4 rated power at 50 % ED: 160 kVA Sec. short-circuit current: 99 kA Sec. open-circuit voltage: 5.8 - 9.74 V electrode force: 140-2,040 daN with 4-step switch add-on control cabinet according to VDE 0100 with main switch Synchron-100 program control MPS 8043/1 Ijdpfjp H T Adox Adnsa

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg Ijdpfx Adjguvtdonoa good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Iodpfx Adoguvtaensa Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Iodpfx Aehubgzednja Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable Iodpfx Ajxy Hqtednsa -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: used, functionality: fully functional, overall weight: 6,000 kg, Equipment: documentation/manual, Model: DP-GW-2500A Wire diameter: 5–12 mm Longitude wire spacing: 100–300 mm Iodpfx Adoxv At Asnea Cross wire spacing: Min. 100 mm Mesh width/height: Max. 2.5 m Mesh length: Max. 10 m Welding speed: 40–65 cycles/min Welding electrodes: 24 pcs Welding transformers: 160 kVA × 12 pcs Wire feeding method: Pre-straightened & pre-cut Overall size: 14 m × 2.4 m × 2.5 m Weight: 6000 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Iodpfoxfrv Eox Adnoa

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! Iedpfx Adjwbixronoa You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Iedpfeuxbx Djx Adnoa

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: Isdov Uzf Eopfx Adnoa - Siemens PLC, CPU 315 - Rexroth hydraulics - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Condition: used, Dalex spot welding machine type SL 16-1, 400 Volt, 16 kVA Isdjxz R Tbopfx Adnsa

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Ijdpfxexz Av Ij Adnsa Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Technical data: see image Ijdpfx Adexz Amyenja

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Isdpoxf Uw Sofx Adnja Weight approx. 300 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 430 A, welding current at 100% duty cycle: 360 A, welding current (max.): 500 A, For sale: Kolarc XM500 500A 40% ED 430A 60% ED 360A 100% ED 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive Isdpoxzilisfx Adnsa New Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and 10 Meter interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (max.): 250 A, For sale: Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Isdpsxziinefx Adnsa Synergic 2/4 Step 4 Roller drive Steplesly adjustable Program memory Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.