Used Ultrasonic Welding Machine for sale (66,853)

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm Hedpfx Agjvt Sc Ejtsfl LxWxH: 400 x 500 x 1200 mm

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Hfedpfxeyimqwo Agtjl Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, 1 unit of BRANSON 8100 ultrasonic welding machine including table Hfsdpfx Agezqcm Eetsl Color: as shown in the pictures, according to the images and inspection Condition: used

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Serial number: 19-11231 Hfodpfx Aeznvfijgtsl Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Year of construction: 2022, condition: new, Manufacturer: Hermann Ultraschall (Herrmann Ultrasonics) Type of equipment: Ultrasonic welding machine Model: HiQ G1 Dialog 20/2400 LF Serial number: 20.087/21 Hjdpfx Aoznvcnogtsfl Year of manufacture: 2022 Generator power: 2400 W Operating frequency: 20 kHz Welding force (at a pressure of 8 bar): minimum: 30 N maximum: 2490 N Working stroke: 150 mm

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg Hfedpfx Aoy A Iftsgtel

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo Hodpfx Agoxzb E Istofl -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc. Hfjdpfxjxrz Tas Agtjl

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Hfodpfx Aevxppaogtjl Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Hfsdpfxsx A A Exo Agtjl Includes manual

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Hfjdpfeylpqbex Agtol

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Hfodpfxjzkkayo Agtel are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Hjdpfeza T A Rex Agtofl

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Hfodpfx Agez Afhistsl Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: good (used), 1 used water-cooled spot welding machine Technical data: Max. welding power: 23.7 kVA Rated power at 50% duty cycle: 8 kVA Hsdoy Naq Ijpfx Agtofl Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Coolant flow rate: 4 l/min Weight: 77 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Hsdpfx Agjzz Sdzetsfl Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, input voltage: 400 V, total height: 1,700 mm, total width: 1,300 mm, total length: 1,000 mm, welding power (max.): 45 kVA, overall weight: 850 kg, Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 1000*1350*1700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Hodszz R I Eepfx Agtjfl Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Hfjdpfxjrtvi Ue Agtel Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode Hfjdsrtvi Rjpfx Agtel - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Hfodez Alfnopfx Agtol Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Hfodpfxoyztpbj Agtol Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Technical Specifications: Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Hfedsvuz N Ropfx Agtol Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg Hfedpfxedzqbvj Agtsl In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle Hfsdpjdzqacjfx Agtjl 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition Hfjdpfxsd N E Rve Agtel The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.