Used Optimum Sar 1000 for sale (130)

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Iodpfx Aow Edbpsffstr Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3515150, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 750 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, chuck outer diameter: 200 mm, spindle motor power: 17,000 W, Turning machine (Lathe) with driven tools, Y axis and measuring arm. Iodpjwnp Sxefx Affetr

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm Itedpfx Afsg Uaiujfor spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Itsdpfxovvi Auo Affjr Storage location: Nattheim

Condition: excellent (used), Year of construction: 2015, functionality: unexamined, turning diameter over bed slide: 560 mm, center height: 280 mm, center width: 1,420 mm, rotational speed (max.): 1,600 rpm, overall weight: 2,300 kg, For sale is an Optimum TH5615 lead and feed screw lathe from 2015 (7.5 kW). Designed for precision turning of single parts, small batches, or repair components. With a center height of 280 mm, a distance between centers of 1,420 mm, a maximum spindle speed of 1,600 rpm, robust construction, and a powerful 7.5 kW motor, it is ideal for professional workshops, training facilities, or production operations with high quality standards. The machine is in condition appropriate for its age, has not been inspected, and is offered as-is. Our Service Commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machines and other brands. We place great value on personal service and are happy to support you at any time even after your purchase. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Ijdjxyx E Nspfx Affetr All information subject to change without notice.

Year of construction: 2015, condition: used, max. dia. of grinding wheel 150 mm turning speeds 2850 U/min total power requirement 0,45 kW dimensions 465 x 316 x 302 mm weight 10,7 kg NEW PRICE: ~ 200.00 EURO Description - Double grinding machines from OPTIMUM - a quality product for trade and industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous use - Extruded aluminum housing - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings Itedpjwp S U Eofx Affer - Spark guard on each grinding wheel reduces flying sparks - Stable, adjustable workpiece support - Viewing windows made of shatterproof material - Vibration-damping rubber feet - Two universal corundum grinding wheels

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Iodsxyh Dbspfx Affstr Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: used, Year of construction: 2019, operating hours: 19,900 h, functionality: fully functional, machine/vehicle number: 3515170, turning diameter over cross slide: 450 mm, spindle bore: 52 mm, turning diameter over bed slide: 600 mm, center height: 300 mm, turning length: 1,250 mm, quill diameter: 90 mm, quill travel distance: 120 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, swing diameter over cross slide: 450 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, travel distance X-axis: 305 mm, travel distance Z-axis: 1,250 mm, chuck outer diameter: 200 mm, spindle motor power: 30,000 W, Turning machine (Lathe) with driven tools and measuring arm. Iodpfx Afjwnqk Aefstr

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Ijdogd Si Eopfx Affetr Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Itsdpfxsxyk Ucj Affjr

Condition: like new (used), Year of construction: 2024, Manufacturer: Optimum Year of manufacture: 2024 Condition: as new, workshop-tested Delivery time: immediately available Technical Specifications Centre height: 165 mm Centre distance: 830 mm Swing over bed: 330 mm Swing over cross slide: 208 mm Turning length in bed gap: 430 mm Spindle speed range: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle taper: MK5 Tailstock taper: MK3, quill travel 110 mm Weight: approx. 512 kg Machine dimensions (L×W×H): 1685 × 745 × 1590 mm Feeds and Thread Cutting Metric: 0.4–7 mm/rev (26 pitches) Imperial: 56–4 TPI (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Cross feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed steady rest (Ø 6–50 mm) Travelling steady rest (Ø 8–30 mm) LED machine lamp Reducing sleeve MK5/MK3 Two fixed centre points MK3 Four-way tool post 16 mm Change gear set Machine base Itsdexykniopfx Affjr Initial fill with quality oil Operating tools

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, total height: 2,200 mm, total width: 1,860 mm, total length: 2,164 mm, table width: 320 mm, table length: 800 mm, type of input current: AC, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10 rpm, table load: 300 kg, overall weight: 2,800 kg, Equipment: documentation/manual, Fully functional milling machine with numerous accessories and manual. Isdpfx Afew U Rdnjfotr

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements B9errbkz8v - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Grinding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3600 mm Width/depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical data Total connected load 7.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Itsdpfxjxyhvke Affjr Clamping surface length 400 mm Clamping surface width 800 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA Iodpfoww Nb Sox Affotr weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Itodpodqzbnjfx Affjr Guaranteed concentricity

Year of construction: 2016, condition: ready for operation (used), A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible. Iedpfx Ajxx Udljffetr

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Itedpfxew Ebngs Affjr Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Itjdpfx Aecnxrceffsr Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: ready for operation (used), A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible. Itsdjxxbaaspfx Affsr

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn L44 CNC Premium CNC lathe direct from the manufacturer. L44 CNC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Width/depth max. 2300 mm Length approx. 2530 mm Width/depth approx. 1595 mm Height approx. 1795 mm Weight approx. 2600 kg Working areas Lathe chuck diameter 150 mm Lathe chuck Hydraulic control of the clamping movement Center height 223 mm Center width 850 mm Swing diameter over machine bed 446 mm Swing diameter in the bed bridge 520 mm Swing diameter over cross slide 240 mm Bed width 300 mm Motor torque X-axis 6 Nm Z-axis 8.5 Nm Speed range Number of speed ranges 1 Speed range 10 - 3000 min¯¹ Electrical data Drive motor power 7 kW Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 23 kVA Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Hydraulic system Motor output 0.75 kW Tank capacity 50 l Coolant system Coolant pump output 270 W Tank capacity 90 l Machine data Chuck opening diameter 40 mm Motor(s) Torque drive motor 33 Nm Tailstock Mounting MK 4 Quill stroke 165 mm Quill diameter 52 mm Spindle Spindle holder DIN ISO 702-1 No. 5 Spindle bore/bar passage diameter 52 mm Control system Type Sinumerik 828D PPU 240 System software SW 24 CNC memory 3 MB Look Ahead 50 Block change time 3 ms Number of tools 128 Travel distance X-axis 250 mm Z-axis 760 mm Vertical spindle Power drive motor continuous operation S1 7 kW Power drive motor S6-30 % operation 16 kW Drive motor torque 33 Nm Drive motor S6-30 % operation 80 Nm Feed rate Speed X-axis 15000 mm/min Z-axis 15000 mm/min Feed force Feed force X-axis 7.5 kN Feed force Z-axis 5.3 kN Tool changer Hydraulic type; VDI 30 Number of tool positions 8 pcs Mounting height, width square max. 20 x 20 mm Boring bar mounting diameter max. 25 mm SIEMENS SAFETY INTEGRATED Equipment Main spindle - Solid design Machine bed - Heavily ribbed - High rigidity and durability Guideways - Stable flat bed guide Recirculating ball screw - For high rapid traverse speeds in all axes - Less wear and tear - For high positioning and repeat accuracy Cast body - Hardened HRC48-52 and heat-treated Machine feet - Six pieces - Optimum alignment of the machine Heat exchanger - Closed switch cabinet with intelligent cooling management - Optimum temperature even at high outside temperatures Tool changing system - Eight tool stations - Hydraulic VDI30 tool changer - Pick-up height max. 20 mm Hydraulic unit - Motor power 750 W - Tank capacity 50 liters - Clamping pressure / operating pressure 2,500 - 2,942 kPa Three-jaw chuck - Hydraulic three-jaw lathe chuck Ø 150 mm - Hydraulic loosening and clamping via foot switch - Simple clamping of workpieces Iedpfsw Ea Tuox Affstr - Hard and soft block jaws Central lubrication system - Automatic supply at intervals - Reduces wear on bearings, ledges and ball screws - With float switch. An acoustic signal sounds if the oil level is too low

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Itodeg U Uv Ujpfx Affsr Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control system stands out for its performance, speed, precision, and long service life. • Column design made of cast iron for high rigidity • Carousel-type tool changer with eight tool stations • All linear guides with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed-loop system) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop slam switch greatly facilitates program setup • Coolant system with 70-liter coolant tank • Tool change carried out automatically or at the push of a button (electropneumatic tool clamping system) • Heavy-duty, precision-milled table – generously sized and finely surface-machined • Large access doors to minimize cleaning and maintenance times • LED machine lamp for full illumination of the work area • Additional SIEMENS package: material defect warranty and free on-site service (OSS) SINUMERIK 808D • Software package identical to control version, ensuring process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no reference run required • Higher accuracy Control • 8.4” LCD color display with 800 x 600 resolution Additional SIEMENS OSS package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Horizontal milling table Length 690 mm Width 225 mm Vertical spindle to table distance min. 90 mm Itedpfx Afjw Ea Swefor Vertical spindle to table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot pitch 63 mm Maximum load 150 kg Accuracy Repeatability ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle to column distance min. 280 mm Spindle to column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power S1 continuous operation 3.7 kW Drive motor power S6-30% duty cycle 5.5 kW Drive motor torque S1 continuous operation 24 Nm Drive motor torque S6-30% duty cycle 36 Nm Feed speed X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis S1 continuous operation 3.5 Nm Y-axis S1 continuous operation 6 Nm Z-axis S1 continuous operation 6 Nm Tool changer Type: carousel Number of tool stations: 8 Max. tool diameter: 100 mm Max. tool length: 200 mm Max. tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range Itsdsvutyhspfx Affsr 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Ijdpfx Afsw Ea Rtefstr Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Isdjv Sg T Njpfx Affstr Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base