Used Bridgeport Lathe for sale (49)

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fsdpfx Aoyhph Esc Njfu

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Ffsdpfx Asv Uqb Nec Neu

Condition: ready for operation (used), Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible. Ffedpsycwq Refx Ac Nou

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Ffsdpfxetufb Io Ac Nou

Condition: defective spare-parts repository (used), Year of construction: 1991, functionality: not functional, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, table width: 380 mm, table length: 925 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Fjdpsyf Ac Dsfx Ac Nofu Travel X-axis: 700 mm Travel Y-axis: 350 mm Table size: 925 mm x 380 mm Spindle taper: SK 40 Spindle speed: up to 6,000 rpm Drive power: 11 kW Tool changer capacity: 20 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,100 x 3,000 mm Machine weight: approx. 3,600 kg Note: The machine no longer starts. It is being sold for spare parts.

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 600 mm z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t 4th axis * Ffsdpfxsyfgiuj Ac Neu

Condition: used, Year of construction: 2007, Technical details: x-travel: 480 mm y-travel: 400 mm z-travel: 430 mm control: Siemens 828 shopMill number of spindle speeds: 10000 U/min. max. torque on the spindle: 47,7 Nm spindle taper:: SK40 tool changer with: 20 Plätze table-size: 600x400 mm Fjdpfx Acsydn Nye Nefu max. table load: 200 kg spindle drive: 7,5 kW rapid traverse:: 36 m/min interface: ja Vertical Machining Center with automatic pallet changer *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BT-40 spindle with BBT (BIG-PLUS) interface, 18.5 kW power and head-mounted cooler. High-pressure cooling through the spindle. CNC HEIDENHAIN TNC 530 with remote electronic handwheel. Belt chip conveyor. Tool presetting. CE standards. Installed in 2008. Machine only, without vice and without toolholders. Ffodpfoydlkbox Ac Nou

Condition: used, Year of construction: 2007, functionality: fully functional, We offer you this used BRIDGEPORT XR 1500 E vertical machining center, year 2007, currently located in Spain. Immediately available. Fedpfxoygwvbo Ac Nsfu 400 V, 50 Hz Rated current 58 A Including 4th axis MAGERL Chip conveyor Spindle operating hours: 12,223

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, CNC control Heidenhain iTNC 530 electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 500 mm Tischgröße / table size 1150x540 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Fsdpfx Acex U Rxyj Nofu Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1998, Bridgeport VMC 600/22 Digital CNC Milling Machine with Heidenhain TNC 410PA CNC Control, 830 x 410mm Work Area/Bed, 22 Position ATC, BT40 Spindle Taper. S/No. 821424 (1998) Machine Weight 2500kg. Country of Origin: United Kingdom Ffjdpfx Aceyfgcbj Nsu Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 43,000 m/min, feed rate Y-axis: 43,000 m/min, feed rate Z-axis: 30,000 m/min, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, X - Travel: 1020mm Y - Travel: 610mm Z - Travel: 600mm Table Length: 1150mm Table Width: 580mm Table load: 900 Feed rate X-Axis: 43000mm/min. Feed rate Y-Axis: 43000mm/min. Ffjdsx Tfuaopfx Ac Nju Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 2830mm Width: 2340mm Height: 2683mm Weight: 3600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2005, 1 unit 3-axis machining center, make Bridgeport model VMC 760 XP³, year 2005, serial number 310B107, machine weight 6,780 kg, control Heidenhain iTNC 530, recorded operating hours 13,983, control on time 14,538 h, program run time 5,923 h, milling table approx. 1,000x600 mm, 5 T-slots, XYZ travels approx. 760x610x610 mm, chip conveyor, 30-position tool changer, internal no. 10 Ffsdpsyaw Nhofx Ac Nju

Condition: ready for operation (used), Year of construction: 1981, Bridgeport BR2J2 Turret Milling Machine Digital Readout Spindle Taper R8 Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Knee Travel: Z - 405mm Quill Travel Ffedpfjyary Isx Ac Nju Z - 127mm Coolant 415V Electrics Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79044 Machine Serial Number: 362070681W Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light Fedpfxsxgqwdj Ac Nsfu FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Traverses XYZ 480 x 400 x 330 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Bridgeport VMC 760XP Year of manufacture 2006 Heidenhain iTNC 530 Fjdpfx Aceuk Nt Ee Nofu Spindle speed up to 12.000 rpm Drive power 25 KW Tool changer 30-fold BT40 IKZ 20bar M&H infrared 3D probe Chip conveyor Total operating hours 30256 hrs. New Heidenhain SSD hard disk New Heidenhain power unit Machine is 2nd hand Machine can be inspected and demonstrated at our premises.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 900 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travels x-axis travel: 600 mm y-axis travel: 500 mm z-axis travel: 600 mm Spindle Spindle speed – infinitely variable: 0–12,000 rpm Spindle motor: 10 kW Tool holder: SK40 DIN 69871 Table Clamping surface: 900 × 500 mm Control Control system: iTNC 530 Heidenhain Tool Magazine Number of tool positions in magazine: 24 MACHINE DETAILS Electrical Data Total power requirement: 22 kW Weight and Dimensions Fedpfjwynrzex Ac Nofu Machine weight: approx. 6,4 t Space requirements: approx. 5.3 × 3.5 × 3.5 m EQUIPMENT Scraper-belt chip conveyor Coolant system with 3 pumps and cartridge filter High-pressure pump Grundfoss type CRK2-220/22 A-W-A-AUUV

Condition: excellent (used), Year of construction: 1986, CNC Machine: Heidenhain TNC 155 Fsdpjx H Sdzofx Ac Njfu Table dimensions: 860 x 380 mm Travel paths: X-axis: 510 mm Y-axis: 400 mm Z-axis: 480 mm Tool magazine: 16 positions Tool holder: BT 40 Weight: 3,500 kg Year of manufacture: 1986

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 Ffedpfjxbtnbex Ac Nsu weight of the machine ca. 6700 t

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 5500 mm Measurements depth 4400 mm Measurements height 2900 mm Control Unit Brand SIEMENS Model 810T Main Drive Ffsdpfx Asx D Hk Iec Neu Number of axis 3 Movement X-Axis Movement 1250 mm This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand HEIDENHAIN Model TNC 426 Main Drive Number of axis 3 Ffedpfsx D Hutjx Ac Nsu This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. It's a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 Fodoviwg Uopfx Ac Nsfu spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant. Fjdexfvnrjpfx Ac Nsfu

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, Ffodpfx Acsk Shihs Nsu C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Coolant, Low Volt light

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Fodpfx Acjxrca Uo Nsfu