Used Okuma Lb 15 for sale (168)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,082 h, functionality: fully functional, machine/vehicle number: 114599, turning length: 541 mm, turning diameter: 210 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, TECHNICAL DETAILS Machining specifications Turning length: 541 mm Turning diameter: 210 mm Axes and travels Kdodpow Ekruefx Afiju X-axis travel: 192 mm Y-axis travel: 50 mm Z-axis travel: 700 mm Spindle Spindle speed: 6,000 rpm Spindle motor power: 11 kW Feed X-axis feed rate: 30 m/min Z-axis feed rate: 40 m/min MACHINE DETAILS Electrical data Supply voltage: 400 V Phases: 3 P Frequency: 50 Hz Operating hours On time: 92,265 h Spindle hours: 23,082 h Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The machine will remain powered until the end of the auction, after which it will be dismantled.

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Kdodpfowxb Erox Afiju Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 36,000 h, functionality: fully functional, CNC Turning Machine Okuma LU300-2ST 350 Year of manufacture: 2005 - Control: Okuma OSP E100L - Clamping system: Chuck SK65 - 2 disc turrets with VDI40 (12 + 8 stations) - Parts catcher with conveyor belt - Chip conveyor Without tailstock Without bar feeder Without spindle reduction Without VDI tool holders Machine weight: 6.8 t Kdodpfxew Darbs Afisu

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, UNIQUE offering:for this price we will guarantee a good machine! Inspection by Okuma at location included, anything that needs to be done discounted from this price! High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. It has all the bells and whistles, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires! Cleaned and ready for installation. Can be seen under power, all checks allowed, we can ask Okuma to make a test report if required. Free loading on truck. Transport can also be arranged in the EU. As new condition, 930 hours on spindle, new 300.000 euro's, so a 105.000 saving on an as-new machine with holders and new tooling included! Kdjdpewzzrkjfx Afiou

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand OKUMA Additional Equipment Spindle upgrade for 50000 RPM / Oil mist extraction unit Kjdewt Uvmspfx Afiedu Height: 2946 mm / Floor Space (W × D): 2160 mm × 2810 mm Weight: 7700 kg This 5-axis Okuma GENOS M460V-5AX was manufactured in 2018, featuring a robust vertical machining center design. It boasts a spindle speed of 15,000 RPM, a table size of Ø400 mm, and a maximum load capacity of 300 kg. The machine includes a high-capacity 32-tool automatic changer and advanced feed rates for precision. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 525 mm, workpiece weight (max.): 680 kg, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: OSP-U100L Travel X: 1,020 mm Travel Y: 510 mm Kjdpfxowtrbas Afiodu Travel Z: 525 mm Table Load capacity: 680 kg Clamping area: 1,200 mm x 510 mm Tool changer Magazine positions: 20 EQUIPMENT - Chip conveyor

Condition: excellent (used), Year of construction: 2011, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Kodpstdg Evjfx Afijdu Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Kdjdpfx Afswrr Nhsiou Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Kodpfxsi Ecars Afisdu

Condition: good (used), Year of construction: 2018, operating hours: 6,177 h, functionality: fully functional, machine/vehicle number: L3M0060, turning length: 450 mm, turning diameter: 300 mm, rotational speed (max.): 4,500 rpm, bar diameter (max.): 69 mm, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. swing diameter: 520 mm Max. turning length: 450 mm Main spindle Bar capacity: 69 mm Spindle nose: ASA8 Spindle motor power: 22 kW Spindle speed: 20 / 42 m/min Spindle chuck diameter: 10″ Driven tools Power: 7 kW Speed: 4,500 rpm Tailstock Tailstock taper: MT5, rotating MACHINE DETAILS Power-on time: 8,666 h Kdodpfx Aeww Ikxofieu Spindle hours: 6,167 h CNC control: CNC OSP P300LA-e (15″) Weight: 5,000 kg Connected load: 28.6 kVA Total power-on time: 16,620 h CNC control operation time: 8,667 h Spindle run time: 6,177 h Cutting time: 6,004 h EQUIPMENT - Manual presetting device - Roller-type chip conveyor - Rotating MT5 tailstock - High-speed driven tools - CNC control with large 15″ screen

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Kdedpfxjwttuho Afiju Spindle Speed (Motorized Tool Spindle): 5000 rpm This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,500 h, functionality: fully functional, Control: OSP100L Year of manufacture: 2005 Operating hours: 62,477 h Spindle hours: 8,169 h Number of spindles: 2 C-axis on main and sub spindle Number of turrets: 1 Milling spindle: 1 Kdjdpfx Afowww Imsisu Turret stations: 12-position, VDI40 Y-axis Tool holders on milling spindle: HSK63 Tool magazine: 40-position Chuck on main and sub spindle Tool package: 30x HSK holders, 6 pcs VDI 40 holders Parts feeder with safety fence and 40 tool holders

Condition: good (used), Year of construction: 2000, 🔧 FOR SALE – OKUMA MX 45 VAE Vertical Machining Center 📍 Available immediately: OKUMA MX 45 VAE vertical machining center in excellent condition, ready to integrate into your workshop! 📌 Key Features: ✅ Brand: OKUMA ✅ Type: Machining Center ✅ Model: MX 45 VAE ✅ CNC: OSP-U10 M ✅ Year: 2000 ✅ X-travel: 760 mm ✅ Y-travel: 460 mm ✅ Z-travel: 450 mm ✅ Speed: 7000 rpm ✅ Table surface: 1000 x 460 mm Kdjdpfx Aswwkuaofisu ✅ Max. table load: 1000 kg : 500 kg ✅ Internal coolant supply ✅ Tool magazine for 20 tools ✅ Tool holder: SK 40 ✅ Cutting speed x, y, z: 10 m/min ✅ Rapid traverse x, y (z): 20 (15) m/min ✅ Dimensions: 1,800 mm x 2,380 mm x 2,650 mm 📸 See photo below (machine visible on site) 📦 Condition: Very good 💰 Price: upon request 👉 Do not hesitate to contact us for more technical information, additional photos, or a visit.

Year of construction: 1999, condition: good (used), turning diameter 580 mm turning length1.500 mm X/Z 568/1660 mm Y-axis C-axis spindle 3.200 min-1 Kdodpfxjiiclle Afiou driven tools 3.000 min-1

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ksdpfoi Ecayex Afiodu

Condition: used, CNC control, control panel, machining center -Disassembled from a: CNC lathe Make: Okuma type LB15 Kdedpfx Afodtcrksiou -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: used, Year of construction: 1986, operating hours: 10,839 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 1,000 kg, total height: 2,945 mm, total length: 4,013 mm, total width: 3,790 mm, table width: 510 mm, table length: 1,300 mm, table load: 1,000 kg, rotational speed (min.): 30 rpm, overall weight: 8,200 kg, spindle speed (min.): 4,000 rpm, number of slots in tool magazine: 20, tool length: 400 mm, tool diameter: 230 mm, tool weight: 15,000 g, Equipment: rotational speed infinitely variable, For sale production cell 2 OKUMA CNC milling machines with automatic tool changing. . Machines have full documentation. Machines were used for making spare parts for CNC machines. Kedpfx Afou Atn Ssiedu Highly rigid machines with spindles with mechanical gear ratio the machine itself selects the gear depending on the selected speed (4 gears). The larger MC-5VA machine has IGF dialog programming (full documentation) also has M-codes for the user - in our case they were used to work with indexed 4th and 5th axes. Machines operating used with a large number of tools Comes with a well-equipped Lista brand tool cabinet, a BT50 toolholder cart and a sturdy workbench with drawers. Includes 2 BIG-Kaiser mulliplicators. 4 BIG-Kaiser boring bars with cooling through the tool. Quite a few milling heads including large ones over fi 200. A large set of branded EPB toolholders. Spare bearings for the main spindle. Lots of spare parts.

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Kedpfx Aewmg U Iofiedu Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Kdodpfx Afjrfw Nhsiou Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Kdjdpfei Ecacex Afiju

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Kdjdpfxsi Ecags Afisu

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Kodpfx Afoi Ecakeiedu

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Kdedpet Izafefx Afiju

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Kedpfxji Eca Ie Afiedu

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Kdjdsi Eca Sspfx Afiou