Used Oil Mist Extractor for sale (7,580)

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dkedpfe Ahm Iisx Aiisw Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 60 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 400 mm, filter area: 84 m², actuation type: electric, total height: 4,400 mm, total length: 1,400 mm, total width: 1,500 mm, overall weight: 1,500 kg, Equipment: CE marking, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The Absolent dust filter is based on the latest and most efficient filtration technology. This solution works particularly well in installations operating in continuous mode (24/7). Dust-laden air is drawn in through an inlet located in the upper part of the filter. The heaviest dust particles fall directly into the dust collection container. The air, along with lighter particles, is directed further towards the filter cartridges, where the dust settles. The filtered air is then removed from the device through an outlet using an external fan. When the pressure drop across the filter cartridges exceeds the set limit value, valves open in the cleaning air tank, and a pulse of compressed air is released from the cleaning nozzles. This pulse causes the accumulated dust to detach from the filter surface and fall into the dust collection container. Range of applications: The Absolent A•dust is ideal for processes that generate dry dust, such as: • Welding • Laser and plasma cutting • Grinding and polishing Brand: Absolent Model: A•dust5 Parameters: Fan with a power of 18.5 kW. Capacity: 6000 m3/h Vacuum: 6000 Pa Dsdj Ady Dljpfx Aiiekw Filtration area: 84 m2 Included: Partial ductwork Summer/winter flap Stock number: 1175

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: Dedpfxo Aazd Es Aiiekw *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: good (used), Code: 0513 Brand: AL-KO - GERMANY Model: MOBIL JET 120 - CE Standard Wheeled dust collector for wood dust, for joinery workshops, carpentry workshops, sawmills and other applications – CE Standard Three-phase motor 2,2 Kw Suction inlet diameter 120 mm Air flow rate 1120 m³/h Manual filter cleaning Overall dimensions mm 1085 x 650 x 1974 h Weight kg 100 Dkedj Ahyw Eopfx Aiiew

Condition: used, Technical specifications: Filter bag diameter: 48 x 200 mm Collection bag diameter: 4 x 600 mm Dust extraction nozzle: 350 mm Power supply: 400 V Motor speed: 2880 rpm Motor power: 7.5 kW Overall dimensions: Dksdpfx Ais Ahyccoisw Length: 3500 mm Width: 1100 mm Height: 3800 mm

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Dksdpjz D E Icefx Aiiow

Condition: excellent (used), Year of construction: 2008, Schuko Vacomat 300 – Year of manufacture: 2008 – In excellent condition – Performance: 7.5 kW (10.20 hp) Input voltage: 400 V Input current: 15 A Input frequency: 50 Hz Volume flow rate: 5,800 m³/h Suction pressure (max.): 38 mbar Suction capacity: 5,800 m³/h Suction pipe diameter: 300 mm Total weight: 830 kg Features: CE marking Location: available from warehouse 54634 Bitburg Dksdez Eub Iepfx Aiisw – immediately available –

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Dksdpfx Aijz Hvv Njiew Nominal flow rate: 180 [L/min] Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. Dkodpez R T Eljfx Aiisw The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Djdpfx Aiez Trrhjiekw Stock number: 1029

Condition: good (used), Year of construction: 2019, functionality: fully functional, volume flow: 8.64 m³/h, filter area: 120 m², suction capacity: 12,000 m³/h, Equipment: type plate available, Extraction capacity: 6,000–8,640 m³/h Max. fan capacity: 12,000 m³/h Total filter surface: 120 m² Number of filter elements: 12 Operating hours: 2.045 Featured with: - Central welding fume extraction and filtration system - Filter material ePTFE membrane - Automatic compressed-air filter cleaning - W3 Welding fume class - Touchscreen control - Additional extraction point Country of origin: Germany Dedpfxoz Tdfye Aiiokw Motor power: 7.5 kW Machine (L×W×H): 370 × 190 × 280 cm Machine weight: 1.220 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Dkedpsz R Shlefx Aiiew Filter cleaned pneumatically with compressed air (manually). Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Dkjdpfez N Am Uex Aiiow Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Dedpfx Aijzpxdksijkw Weight: 1200 kg Stock number: 1158

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Dkjdpoz Hkgiefx Aiisw Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171

Condition: excellent (used), functionality: fully functional, External dimensions: length 5m x width 3m x height 6m Filtration area: approx. 112 m² Engine power: 11 kW Capacity: approx. 15,000 m³/h Djdpfx Aiezi Rkceiekw Mechanical cleaning of filter bags Return channel for cleaned air

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Dedpoz Ayv Usfx Aiiskw Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Djdpsz Nx S Tsfx Aiiokw Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Year of construction: 2006, condition: used, machine/vehicle number: AT99, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied dismantled for rapid transport and reinstallationApplication: Pre-clarification and separation prior to storage, transfer, and filling in beverage production and industrial packaging workflowsAdvanced Automation & Control SystemsThe unit is delivered complete with an electrical panel that provides centralized control for start/stop sequences, motor protection, and process interlocks. The panel architecture supports safe operation, facilitating integration with plant-level controls, tank level management, and downstream fillers. Clear labeling and organized wiring simplify commissioning and maintenance, while standard protections help safeguard operators and equipment during routine use.Production Line Integration CapabilitiesEngineered for straightforward line connectivity, the decanter centrifuge interfaces easily with upstream feed systems and downstream buffer tanks or clarifiers. Its continuous discharge design helps stabilize flows to filling and packaging equipment, improving overall line efficiency. It can operate as a standalone separation module or be incorporated inline with CIP-ready manifolds, transfer pumps, and automated valves. Flow and residence time can be tuned via feed rate adjustments to accommodate a range of viscosity profiles and solids loads encountered in beverage production and related industrial packaging processes.Machine Condition & Maintenance HistoryThe machine is already dismantled, allowing efficient loading, transport, and rapid placement at the installation site. Mechanical and electrical subsystems are organized for reassembly, with the supplied electrical panel simplifying recommissioning. Overall, it represents a reliable second hand asset ready to be integrated into an existing used bottling line or a new process area following standard installation and start-up procedures.Operational Performance & VersatilityThis decanter centrifuge is designed to deliver stable separation performance across continuous operation, supporting clarification targets that improve downstream filtration and filling quality. The included malaxer enhances upstream mixing and conditioning, optimizing separation efficiency and throughput. Its robust industrial design suits extended duty cycles, while continuous solids dischar... Dkodpfx Ae Adt Dxoiisw

Condition: used, Universal Temperature Control Unit Oil Advanced with electric heating and connections for external cooling. Oil temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE Type Advanced Oil D2-300-18-116 Mfg. No.: 151777 Year of manufacture: 2015 Temperature max. 300°C (with heat transfer oil) Temperature range +20°C to 300°C Operating overpressure max. 8 bar Pump capacity 100 l/min Tank volume 22 liters (internal filling volume) External filling volume max. 86 liters Heating power 18 kW Cooling capacity heat exchanger 116 kW Pump motor power 2.8 kW Heat transfer medium Marlotherm SH Circulating water supply and return DN25 - G 1" Cooling water supply G 1/2" Cooling water return G 1/2" Connection power 23.5 kVA Control SCT standard - 7" touch display Mains connection 400 volts, 50 Hz, 32.7 amps - Temperature control medium up to 300°C = heat transfer oil (Marlotherm SH) - Temperature control Dodpfj Aarfaex Aiijkw - External cooling unit or external cooling circuit is required for cooling (cooling is achieved via a heat exchanger between the cooling medium and the heat transfer oil) - Mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1125 x 395 x 1210 mm Weight 226 kg Good condition

Year of construction: 1987, condition: used, machine/vehicle number: LC609, Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, complete electrical panel, pomace-fired boilerConstruction: Stainless steel on key product-contact units (malaxers, hopper, decantation tanks)Use case: Olive oil extraction and clarification prior to bottling/packagingAdvanced Automation & Control SystemsThe line includes a complete electrical panel designed for centralized control of core processes such as crushing, malaxing, paste transfer, decanting, and separation. The control architecture supports safe equipment interlocks and coordinated start/stop sequences across devices, improving uptime and process consistency. Temperature control of malaxers, motor protection, and emergency circuits are managed through the main panel for dependable production. Quick access to drives and instrumentation simplifies routine checks and adjustments during campaign operations.Production Line Integration CapabilitiesThis system manages the primary extraction workflow, integrating seamlessly with fruit reception and washing units. Its modular design ensures a fluid transition from raw fruit to high-quality oil, focusing entirely on the mechanical transformation process. Engineered for industrial efficiency, the system delivers finished oil ready for bulk storage or filtration through a streamlined, high-performance infrastructure.Inline or semi-standalone operation for each individual processing stage.Steady and controlled transfers between units via high-efficiency pumps and screw conveyors.Layout adaptability to suit diverse facility footprints and storage configurations (tank farms).Optimized for edible oil workflows leading directly to bulk storage or filtration stages.Machine Condition & Maintenance HistoryThe installation is complete and reported as functional, with all major components included. It is currently stopped, offering a solid candidate for recommissioning. The comprehensive equipment list reduces the need for sourcing auxiliary machines and supports a coordinated restart plan.Operational Performance & VersatilityDesigned for continuous processing, the line stabilizes paste quality via controlled malaxing an... Dkjdpfxo Adt Drs Aiiew

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Dedpfsy T Iyrox Aiiekw Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, machine/vehicle number: LC573, Used olive oil processing line VITONE V3 3000 kg/hr The Used olive oil processing line VITONE V3 3000 kg/hr delivers a complete solution for olive oil extraction. Industrial olive mills and professional oil producers use this line to achieve efficiency, operational continuity, and consistent oil quality. The system processes up to 3000 kg of olives per hour, offering high performance while reducing capital investment compared to new equipment. Technical configuration of the processing line VITONE manufactures every component of the Used olive oil processing line VITONE V3 3000 kg/hr. As a result, the system offers seamless mechanical integration and compatibility between modules. Moreover, technicians benefit from simplified maintenance procedures. Operators can run the line continuously without compromising output quality. In particular, VITONE uses certified food-grade materials that resist corrosion and mechanical wear, ensuring long-term durability. Olive washing and feed system The VITONE V3 olive washer initiates the process. It uses water and agitation to remove leaves, stones, and soil. Subsequently, the integrated elevator feeds clean olives directly into the crusher. This approach, in turn, minimizes downtime and reduces manual handling. In addition, the enclosed design improves workplace hygiene and reduces contamination risks. Traditional olive crushing The VITONE granite millstone crushes the olives at low rotational speeds. Because of this, the system preserves phenolic content and aroma compounds. Therefore, the machine enables producers to obtain oil with superior sensory qualities. Operators favor granite millstones for high-quality extra virgin olive oil, especially in artisanal production contexts. In other words, this equipment combines tradition with technical efficiency. Paste mixing with thermal control After crushing, the paste pump transfers the olive paste to the VITONE malaxers. These units mix the paste while maintaining precise temperature control. This step is critical, as it promotes coalescence of oil droplets. Consequently, the system prepares the paste for high-yield separation. In addition, thermal stability prevents the degradation of volatile compounds, preserving quality. Solid-liquid separation The VITONE decanter centrifuge separates the solid phase (pomace) from the liquid phase (oil and water). This machine handles 3000 kg/h and operates continuously. Thanks to its high throughput, it ensures stable processing under demanding conditions. Furthermore, the decanter maintains excellent oil recovery rates and leaves minimal residual oil in the pomace. As a result, it significantly reduces waste. Dkedpfj Adt Rxjx Aiiow Final clarification and oil polishing Two VITONE vertical separators perform the final stage of oil clarification. These machines remove fine solids and water traces from the extracted oil. Notably, the built-in collection tubs simplify ...

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Dkedpszxp Dyofx Aiijw Year of manufacture (rack oven): 2011 EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance HS21 80/80 465 333 €2,000.00 Dkjdpfx Asxhdh Ssiisw HS21 80/80 305 475 €2,000.00 Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 SWA 48 80/70 350 420 €2,000.00 SWA 48 80/80 327 460 €2,000.00