Used Oil Chip Centrifuge for sale (16,935)

Condition: ready for operation (used), The K50-7S centrifuge is equipped with an inclined cover for a lower infeed height and 7 settings of individual spinning Cajdpfoxy Tdtox Ab Tsa speed and spinning time

Condition: excellent (used), Year of construction: 1990, 1 x centrifuge Steimel ZAC 7, year of manufacture: 1990, with lifting device and unbalance monitoring. Technical data: Max. load: 300 kg / 130 dm³ Drum diameter: 700 mm Speed: 735 rpm (The machine has 2 speeds, i.e., it first runs for a while at half speed until the material is distributed and then accelerates to full speed.) Cedpfxsu Ttrve Ab Teaa At an additional cost, a crane with an electric chain hoist can be installed. The machine can be demonstrated under power.

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Cajdsx Agpzjpfx Ab Tea Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: refurbished (used), Chip conveyor MAYFRAN MT-10 for OKUMA LR-15 lathe Cjdjx Aggaepfx Ab Teaa

Condition: used, Used Flottweg model Z23-4-441 stainless steel Tricanter centrifuge. Maximum bowl speed 5,500rpm. Sediment density 2.9kg/dm3. Maximum tempurature 100 deg.c. Main drive rated 11kw/13kw, 50/60hz, 2929 to 3524RPM. Back-drive rated 4kw/4.6kw, 50/60hz, 2900 to 3480RPM. Unit includes main control panel with local control panel. Specifications: Material Of Construction: Stainless Steel Codsxyxk Sopfx Ab Tsaa Motor Power: 11 hp Max Bowl Speed: 5,500 RPM Size: Z23-4-441 Conveyor Material: Stainless Steel

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Casdpfx Abowp Rqfe Toa Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2009, operating hours: 9,203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-Mounted Boom Lift | 9203 hours | 115506 kms 📍Location: France, Les Chères 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 77300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 62 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: When the truck is stationary for a long period, it sinks and has to be manually lifted to get it out of its alarm state; swapping the relays also works. The truck has not been tested on the road, there were electrical problems with the boom lift which were resolved during inspection. The machine is very sensitive to malfunctions, and a 24V emergency pump has been additionally installed. The truck has low mileage, otherwise, it is a functioning machine. It has recently been serviced by Oil Steel. 📄 Want to see the full inspection, extra photos, or a video? Caedoxyrz Dspfx Ab Tsa Tip: The reference "38953 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l Caodpfxexz Rg Is Ab Tea - Includes compressed air cleaning - Includes automatic shutoff system

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG Csdpexzrzajfx Ab Tsaa 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Year of construction: 2019, condition: used, Mounting system: Hook lift system according to DIN 30722 Part 1 Rear side: Single-leaf door, liquid-tight with rubber seal Cover: Fixed steel roof with rainwater drainage Casdpfx Abexzpv Uo Toa

Condition: excellent (used), For a simple, clean and effecient way to apply coatings, the Dubor spray master manual sprayers come in various sizes and configurations to perfectly suit your needs. Choose from mobile units on rollers for maximum flexibility, or wall-mounted and table-mounted options for designated spraying areas.  The AM-20-M is a mobile spray unit with a 5 litre stainless steel pressure tank and 4m material hose. This requires connection to external compressed air.  Codpfx Ajxxyu Njb Toaa

Condition: used, Storage location: Supplier Caedpfxow N S Ane Ab Tja

Condition: used, Hereaus Sepatech Biofuge 15R Refrigerated Centrifuge Cajdpfsxzidlox Ab Tsa

Condition: used, 1987 TABLE TOP CENTRIFUGE Number of revolutions: 0-15.000 U/min, adjustable. 110 Watt. 0,55 A SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF066 Listing name: HETTICH MIKROLITER 2020 Centrifuge Casdpfxoxzib Dj Ab Tsa

Year of construction: 2005, condition: used, This listing is for a Hettich Zentrifugen Mikro 200R Centrifuge Cjdoxzh Ntepfx Ab Tsaa

Condition: used, This listing is for a Woodley Equipment Clinispin 642E Horizon Centrifuge Cajdpfjxzh H Sjx Ab Tja

Year of construction: 1998, condition: used, This listing is for a IEC Centra-W Cell washer centrifuge Casdpoxzh Enjfx Ab Tsa

Year of construction: 2004, condition: used, This listing is for a Hettich Micro 22 R Centrifuge The Mikro 22 and Mikro 22R are small, compact bench-top centrifuges for processing microlitre tubes of 0.2 ml to 2.0 ml, and hematocrit capillaries. The refrigerated Mikro 22R also accomodates cyto suspensions and tubes up to a capacity of 50 ml. The Mikro 22 type centrifuges are used for routine examinations of patients' sera as well as in genetic research, virology, cytology and bacteriology. Capacity, performance and cooling of the Mikro 22R are specifically designed to meet the demands of PCR examinations. Super rapid run-up and run-down times shorten the centrifuging operations significantly without stirring the sediment during deceleration. Features and Advantages of the MIKRO 22 Centrifuges: Programmable: Three complete running programmes can be stored and recalled. Metal housing and metal lid, panelling finished in scratch and impact resistant coating. Centrifuging chamber of stainless steel,easy to clean, for additional safety steel-armoured. Lid with see-through glass for speed control during centrifugation. The inner lid is made of stainless steel. Ergonomic lid rail for safe and convenient locking and opening of the lid. Lid locking and holding device Brushless drive guarantees exceptionally smooth running and speed stability. Listing: Hettich Micro 22 R Centrifuge Cjdpjxzhtxofx Ab Tjaa

Condition: used, This listing is for a Abbott 75003530 Centrifuge Casdpjxzhh Aofx Ab Tsa

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Speed range: 500 to 7800 rpm RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Caedpfoxzhhiex Ab Tea Electrical: 120V, 60 Hz

Condition: used, This listing is for a Omega C8C Centrifuge Caedsxzg Smepfx Ab Tea

Condition: used, This listing is for a Grant Instruments LMC-3000 Centrifuge Caodpfx Abjxzg Eme Tsa The Grant LMC-3000 is a low speed benchtop centrifuge ideal for biomedical applications.

Condition: used, This listing is for a Hettich EBA 20 Centrifuge EBA 20 and EBA 20 S are compact and practical centrifuges for small sample volumes. They are fitted as standard with an angle rotor for 8 tubes up to a volume of 15 ml. The EBA 20 attains a max. RCF of 3,461 and is the ideal choice for a medical practice. Caodexzg Eajpfx Ab Toa

Condition: used, This listig is for a Hettich Rotina 420 Centrifuge Caodpfx Abexzg D Ne Tja The Hettich ROTINA 420/ ROTINA 420R is a high performance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes.

Condition: used, This listing is for 1 of 6 Capricorn CEP2000 Centrifuge Cajdpexzg Alofx Ab Toa Capricorn Labs manufacture the CEP 2000 Bench Top Centrifuges and offers full maintenance and servicing support for their CEP Series of Bench Top Centrifuges have been designed specifically for use in clinical trials and are well established as reliable machines, which require very little maintenance. They have been developed to give high performance in a compact unit with simple, easy to use controls.