Used Oil Chip Centrifuge for sale (11,147)

Condition: excellent (used), System: Decanter / centrifuge dewatering system Manufacturer: Hiller Model: demonstration machine Gijdjppt Ibepfx Ahvep System: Dewatering system as a compact system as a ready-to-connect, operational unit mounted on a platform. Design: Changeable rack as a bridge with frame structure made of galvanized steel, plug-and-play integration into ongoing operation Type: DP45N Mach. no.: on request Year of manufacture: 2018 Throughput: up to max. 20 m3/h Max. Speed: 3500 I/min Acceleration: 3063 x g Drum inner diameter: approx. 450 mm Parts in contact with the product: stainless steel Parts not in contact with the product: steel Drum length: 1948 mm Drum material: 1.4392 Screw material: 1.4404/1.4408 Construction: Centrifuge base frame made of steel with foot and support plates for holding and raising the centrifuge Central discharge: with compensator Central chute: incl. central control: Pipe for product-contacting lines: made of stainless steel Electrical engineering; Hiller-VA / Rittal switchgear wired Automation device Siemens S7 Dimensions: approx. 5550x2150x2100 mm (LxWxH) Transport weight: 7500 kg OTHER: This system is available twice

Year of construction: 1992, condition: used, Modell: KSB KRSF-BLOC 50-200, used Typ: KRSF BLOC 50-200 Centrifugal pump Manufacturer Year: 1992 P-Nr.: 5-L40-757 504/2 Q: 9,70 l/s H: 12m n: 1450 1/min Gisdpeiztvaofx Ahvep

Condition: new, Year of construction: 2026, operating hours: 1 h, New speed controlled ALMIG LENTO 15 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control HE Technical specifications Type: LENTO 15LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 10 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,03 to 2,64 m³/min at 6 bar min/max : 1,00 to 2,42 m³/min at 7 bar min/max : 0,97 to 2,20 m³/min at 8 bar min/max : 0,93 to 2,03 m³/min at 9 bar min/max : 0,90 to 1,82 m³/min at10 bar min/max : 0,87 to 1,63 m³/min elektric motor power: 15 kW Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ SPL: 50% load: 66 dB (A) 100% load: 68 dB (A) Length: 1880 mm Width: 850 mm Height: 1985 mm Weight: 890 kg Compressed air connection: G 1 inch Giedpodtm Ndofx Ahvop

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Gisdpjyf Hw Sefx Ahvjp

Condition: good (used), Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump Gedpfsyf Augox Ahvjip -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 150 kg, Die Schneckenpresse WT-85 ist für die Herstellung von Öl im Kaltpressverfahren bestimmt. Der Pressvorgang mit dieser Maschine ist die natürlichste Methode zur Ölgewinnung aus Saatgut – rein mechanisch, bei niedriger Temperatur und ohne den Einsatz chemischer Extractionhilfen. Die Presse ermöglicht eine Leistung von ca. 30 litrów za Stunde. Geeignete Rohstoffe sind unter anderem: Raps, Mariendistelsamen, Leinsamen, Sonnenblumenkerne i viele weitere Ölsaaten. Bei anderen Saaten bieten wir kostenlose Testpressungen w unserem Showroom an. Ein wesentlicher Vorteil von kaltgepressten Ölen ist ihr Gehalt an ungesättigten Fettsäuren, insbesondere an Omega-6- i Omega-3-Fettsäuren. Diese essenziellen Fettsäuren müssen über die Nahrung aufgenommen werden, da der menschliche Körper sie nicht selbst produzieren kann. Dane techniczne: • Länge: 655 mm • Breite: 671 mm • Höhe: 620 mm • Gewicht: 150 kg • Typ produktu: Schneckenpresse zur Ölgewinnung • Verwendung: Zur Ölpressung • Antrieb: Elektrisch • Leistung: bis zu 30 l/h • Motorleistung: 4 kW • Rozpiętość: 400 V Zusätzliche Informationen: • Europäisches Produkt • Garantie und Ersatzteile verfügbar Giodpfx Aowh Ra Rehvop • Verkauf net with USt-ID-Nummer • Abholung vor Ort oder Versand nach Absprache • Besichtigung und Test vor dem Kauf möglich • Wir beraten Aug gerne bei der Auswahl der passenden Ausrüstung für Ihre Anforderungen Itwowh Ra Rov Rtz Ijg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 385 kg, Die Schneckenpresse WT-150 ist für die Herstellung von Öl im Kaltpressverfahren bestimmt. Diese Maschine ermöglicht eine Leistung von ca. 120-150 kg dla Stunde. Als Rohstoffe eignen sich: Raps, Mariendistelsamen, Leinsamen, Sonnenblumenkerne i viele weitere Ölpflanzen. Bei anderen Saatarten ist ein Test erforderlich – diesen fuhren wir gerne kostenlos in unserem Showroom durch! Giodswh Rfyepfx Ahvsp Dane techniczne: • Długość: 1460 mm • Breite: 605 mm • Höhe: 1240 mm • Gewicht: 385 kg • Typ produktu: Schneckenpresse zur Ölgewinnung • Anwendung: Zur Ölpressung Kowv Rtzswh Rfys Islt • Antrieb: Elektrisch • Leistung: bis zu 120–150 kg/h • Motorleistung: 7,5 kW • Spannung: 230V / 400V

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Gisdexl Aauspfx Ahvep

Condition: good (used), Heraeus Minifuge RF Analogue temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 inserts, max. speed 6000 rpm Brake function Automatic unbalance cut-off Automatic lid lock during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg Gijdjhty D Rjpfx Ahvep Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Giedpsiu U Txefx Ahvop Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: good (used), Garant oil cabinet 145x72x75cm Design: Sturdy sheet steel construction with reinforced hinged doors, lockable by sliding handle with pin cylinder lock. The cabinet body is equipped with a single pull-out safety device. Due to the single pull-out safety device, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Drawer shelves and drawers can be accommodated in 25 mm increments. Oil cabinet, equipped with plastic oil cans Drawer/extension shelf load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer extension: Pull-out stop Height adjustment in increments: 25 mm pin cylinder lock: modular plug-in insert HxWxD=145x72x75cm Gjdsk Shv Hjpfx Ahvjip without key Item condition used UVP 3240,- € Further switch cabinets - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), KSB pump Etaline GN 050-160 / 074 G10 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Applications: heating systems air conditioning Water systems water supply industrial circulation systems conveyed Liquids that do not attack the pump materials chemically and mechanically. operating data Gsdpfed Sqkzex Ahvjip Q 17,50 m3 / h H 5.8 m Further data of this pump can be found in the data sheet 1) The sum of inlet pressure and delivery head in the zero point of quantity may be said to Do not exceed the value execution Block pump in inline design, with variable-speed standard motor, pump and motor shaft are rigidly connected. camp Deep groove ball bearing grease lubricated. shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: gray cast iron Standard engine and stub shaft Size designation: 65 Nominal diameter suction / discharge connection 160 Further technical data can be found on the data sheet. Item condition: used Scope of supply: 1 x KSB pump Etaline GN 050-160 / 074 G10

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Gjdpfx Aoi A Ix Hjhvjip

Year of construction: 1999, condition: ready for operation (used), Rotational speed: 6000/min, weight: 500kg, with controls. Giedohmp Iqspfx Ahvsp

Condition: ready for operation (used), With hydraulic pump. Giodpfxjhw E D Se Ahvsp

Year of construction: 1980, condition: ready for operation (used), Output: 20-25,000l/h, motor power: 45kW, including documentation, tools and spare parts, was maintained regularly. Gijdpfxehry E Re Ahvjp

Year of construction: 1981, condition: ready for operation (used), There are two identical centrifuges available, drum diameter: 1050mm, max. rotational speed: 550/min, max. capacity: 230kg, year of construction machine 1/ 2: 1978/ 1981. Godpehynphsfx Ahveip

Year of construction: 2018, condition: ready for operation (used), Two cylindrical centrifuges with hinged lids from an unknown manufacturer, each equipped with two electric motors, are available. The centrifuges have fire damage, and the wiring and the hydraulic system must be renewed. An on-site inspection is possible. Gisdsxp Rbbjpfx Ahvjp

Year of construction: 2018, condition: ready for operation (used), For high-performance applications with temperature-sensitive samples, with pre-cooling function with direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible. Giodewlihhepfx Ahvjp

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Gsdpfx Ahjw S Tymsvjip

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Giedpswtg Hdefx Ahvop

Year of construction: 2006, condition: ready for operation (used), Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg. Godpfx Ahsu Iztgevoip

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Gijdpfoxvdfmex Ahvep

Condition: ready for operation (used), Year of construction: 2003, A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible. Giodpfeydpz Dsx Ahvop

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Gedpfx Ajx El Abjhvsip