Used Numbering for sale (24,714)

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm Cedpfeyhpd Hjx Ac Nopu

Condition: excellent (used), Year of construction: 2011, Engel VIPER 40 stand alone linear robot (2011) Number of axis: 3 Euromap 67 on the robot X= 900mm Y=1900 mm Z=3320mm Codpfx Asxc E S Ioc Nspu Data must be chcecked with our technical team

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, total length: 5,179 mm, table length: 1,800 mm, table width: 650 mm, total width: 3,345 mm, rapid traverse X-axis: 28,000 m/min, rapid traverse Y-axis: 28,000 m/min, rapid traverse Z-axis: 28,000 m/min, table load: 1,500 kg, overall weight: 7,500 kg, X - Travel: 1500mm Y - Travel: 800mm Z - Travel: 500mm Table Length: 1800mm Table Width: 650mm Table load: 1500 Codpfeyhph Esx Ac Nspu Feed rate X-Axis: 28000mm/min. Feed rate Y-Axis: 28000mm/min. Feed rate Z-Axis: 28000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13.5kW Speeds / ranges: 8000Rpm ATC / revolver: 24 Coolant through spindle / Bar:10 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 5179mm Width: 3345mm Height: 2595mm Weight: 7500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm Cpedpjyhpciofx Ac Nou y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Codpfx Aceyhpbxe Nopu Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment Csdpfjyhpanjx Ac Nspu SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840C, number of axes: 12, This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control system: Siemens SINUMERIK 840C (INDEX OEM) • Drive system: AC servo drives with SERCOS interface • Automation level: Fully automatic Cpsdpfx Asyhpguoc Neu • Cooling system: Central coolant system • Lubrication system: Central automatic lubrication • Installed power: approx. 70–75 kW • Typical materials: Steel, stainless steel, aluminum, brass

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Cjdpeyhn Uqjfx Ac Nspu

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 460045, spindle speed (max.): 5,000 rpm, controller model: SIEMENS SINUMERIK 840D, overall weight: 7,500 kg, Equipment: chip conveyor, TECHNICAL DETAILS Csdsyhn Nzspfx Ac Nepu Turret Number of spindles: 2 Number of turrets: 3 Number of positions turret 1: 10 Number of positions turret 2: 10 Tool holder: VDI 25 Lower turret head Number of positions: 10 Rotational speed: 6,000 rpm Power of driven tools: 8 kW Main spindle C-axis (resolution): 0.001° Max. spindle speed: 5,000 rpm Spindle power: 27 kW MACHINE DETAILS Control: SIEMENS SINUMERIK 840D Connection: 50 Hz 3x 400 V Total power requirement: 43 kW Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,100 x 2,100 mm Machine weight: 7,500 kg EQUIPMENT Chip conveyor Foot pedal

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 95428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 450 mm Table length: 750 mm Table width: 600 mm Maximum workpiece length: 1,200 mm Maximum workpiece width: 850 mm Maximum workpiece height: 400 mm Maximum workpiece weight on table: 1,600 kg Tool changer (number of tools): 24 Cjdpfx Aceyhn Hgj Nspu Maximum electrode weight: 100 kg MACHINE DETAILS Connection: 50 Hz 3x 400 V Dimensions & weight Dimensions (L x W x H): 3,150 x 2,750 x 2,960 mm Machine weight: approx. 4,500 kg EQUIPMENT C-axis Tool holder system EROWA Fire suppression system Lamp

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7791, overall weight: 5,000 kg, workpiece height (max.): 25 mm, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Workpiece diameter: 5 - 60 mm Max. workpiece height: 1 - 25 mm Number of grinding heads: 2 Configuration: Double-sided (top, bottom) Grinding wheel outside diameter: 457 mm Grinding wheel speed: 24 m/s MACHINE DETAILS Cpsdpfoyhn Dljx Ac Nou Voltage: 380 V Grinding motor power: 2 x 15 kW Dimensions & weight Dimensions (L x W x H): 4,000 x 3,000 x 2,700 mm Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 164, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: GE FANUC Series 16i-M, spindle speed (max.): 14,000 rpm, TECHNICAL DETAILS X-axis travel: 250 mm Y-axis travel: 200 mm Z-axis travel: 300 mm Number of axes: 3 Max. spindle speed: 14,000 rpm Cpodjyhnzkjpfx Ac Nou Table length: 400 mm Table width: 250 mm Number of T-slots: 3 Distance between T-slots: 80 mm T-slot width: 14 mm Tool magazine capacity: 48 Tool holder: HSK E40 Working feed rate: 20 m/min Rapid traverse: 30 m/min Max. feed force: 3,700 N MACHINE DETAILS Control: GE FANUC Series 16i-M Resolution: 1 µm Compressed air supply: 6 bar Electrical connection: 50 Hz 3x 400 Volt Spindle drive power: 10.4 kW Total power requirement: 18 kVA Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,630 x 2,265 mm Machine weight: approx. 1,700 kg Required floor space: approx. 2 m² EQUIPMENT Vice: Jaw width 100 mm Set of tool holders Coolant system Lighting

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010407, travel distance X-axis: 320 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 320 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 40,000 rpm, TECHNICAL DETAILS Travel distance X-axis: 320 mm Travel distance Y-axis: 320 mm Travel distance Z-axis: 320 mm Number of axes (simultaneous): 5 Max. spindle speed: 40,000 rpm Max. workpiece length: 150 mm Max. workpiece width: 150 mm Max. workpiece height: 150 mm Max. workpiece weight on table: 20 kg A-axis: 360° B-axis swivel range: +/- 115° Number of tools in tool changer: 60 Tool holder: ISO V 30 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Cedpfx Acjyhnygs Nopu MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Connection: 50 Hz 3x 400 Volt Spindle motor: 11 kW Total power consumption: 35 kW Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,400 x 2,900 mm Machine weight: approx. 6,000 kg EQUIPMENT Set of tool holders Coolant unit Chip conveyor Lighting Coolant/mist extraction Switch cabinet air conditioning Status indicator lamp

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Cpedpfeyhnxvex Ac Nju Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Cpjdoyhnxcopfx Ac Neu Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm Cpsdpfx Acoyhnvue Nju 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: good (used), Year of construction: 1994, Electric motor, three-phase motor, brake motor -Manufacturer: Fimec, electric motor with brake -Type: H90L6T Cpodpeyhntgofx Ac Nou -Power: 11 kW -Speed: 900 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP54 -Brake: -Number: 2x motors available -Price: per piece -Dimensions: 355/200/H235 mm -Weight: 17.8 kg

Condition: excellent (used), CATALOG NUMBER 6582 TECHNICAL DATA - Maximum workpiece width: 920mm - Maximum workpiece height: 150mm 2 units: 1) Grooved rubber calibration roller 11kW 2) Grooved rubber calibration roller + belt air blowing 7.5kW From above: - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers - Unit - 2 rubber feeder rollers From below: - 3 rubber feeder rollers - Conveyor belt - Pneumatic belt oscillation - Electric table elevation - Stepless feed speed adjustment - Working pressure: 8-10 bar - Pneumatic brake - Extraction nozzle diameter: 2 x 160mm - Overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - Weight: approx. 1305kg – Made in Germany Csdpex R Du Tefx Ac Nspu – 2 units – Used sander, very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller Cpjdpfox Rqr Ssx Ac Nou - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 7,266 h, functionality: fully functional, machine/vehicle number: 10932-16, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, controller model: Roeders RMS6, spindle speed (max.): 42,000 rpm, The machine spindle was replaced in 2016! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 500 mm Travel Z-axis: 300 mm Number of simultaneous axes: 5 Max. spindle speed: 42,000 rpm Number of tool pockets: 82 Tool holder: HSK E40 Rotary table diameter: 405 mm Max. workpiece weight: 300 kg Rapid traverse: 60 m/min MACHINE DETAILS CNC control: Roeders RMS6 Cpedpfxjyhnu Ro Ac Neu Power connection: 50 Hz 3x 400 Volt Total power requirement: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 3,000 x 2,700 mm Machine weight: approx. 8,500 kg Spindle running time: 7,266 h EQUIPMENT Coolant system Water chiller Workpiece probe Laser tool control system Chip conveyor Workpiece magazine Setup stations (number): 31 Electronic handwheel Lighting

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA Csdox Rq Nwjpfx Ac Nspu - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made Cpjdox Rqutepfx Ac Nou – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Cpedsyhnudopfx Ac Nju Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: good (used), Year of construction: 1993, electric motor, three-phase motor Cpjdpfoyhnpujx Ac Nsu -Manufacturer: Fimec, electric motor -Type: H132SD2UE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm -Weight: 53 kg

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments Codpox Rqk Iefx Ac Nspu - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)