Used Numbering for sale (27,162)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Dlsdoxxlkpjpfx Ab Toa Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow Dledsxu Upmspfx Ab Toa AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Dledjxt Nzbepfx Ab Toa Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Djdpfx Asxz A Udjb Tela Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,228 h, functionality: fully functional, controller model: Heidenhain 620, number of slots in tool magazine: 54, Equipment: chip conveyor, Submitting a bid obligates you to collect the machine on time by the end of 2025! TECHNICAL DETAILS Control: Heidenhain 620 Number of tool magazine positions: 54 MACHINE DETAILS Operating hours Operating hours: 31,063 h Program run: 14,228 h EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal cooling Air cooling 3D probe Dodpsx A D Uusfx Ab Tola

Condition: excellent (used), Year of construction: 2004, operating hours: 80,859 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-axis travel without edge banding: 6,000 mm X-axis travel with edge banding: 5,000 mm Y-axis travel: 1,300 mm Y-axis travel with main spindle + tool diameter 20 mm: 1,630 mm Y-axis travel with edge banding: 1,450 mm Dedpfx Aox Af Ivsb Tsla Clamping table: Dyna Poin BIMA 410 V Number of positions: 4 Edge banding unit: available Operating hours: 80,859 h

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Dlodpfx Asxyi Ihob Tsa Power stabilizer Service tools

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dledpfoxyidpsx Ab Toa Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329J00102, Year of construction: 2018, operating hours: 11,771 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 1,530 mm, mast type: triplex, fork width: 2,050 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,400 mm Free lift: 1,530 mm Fork length: 2,400 mm Maximum fork width: 2,050 mm Minimum fork width: 560 mm Overall height (under clearance): 2,320 mm Dljdpsx Ahnfofx Ab Tja Mast type: Triplex MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,400 x 2,320 mm Unladen weight: 7,616 kg Fuel type: Electric Battery capacity: 930 Ah Battery voltage: 80 V Number of wheels: 4 Operating hours: 11,771 h EQUIPMENT Fork positioner Side shift Heater Full cabin Free lift Work lights

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 565 mm, controller model: FANUC 21M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Dodpsxz Ax Aefx Ab Tela Z-axis travel: 565 mm Speed: max. 12,000 rpm Number of pallets: 2 Pallet size: 400 mm × 400 mm MACHINE DETAILS Control: FANUC 21M

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1165821, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 508 mm Dlsdsxxxgqepfx Ab Toa Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Number of tool magazine slots: 40 MACHINE DETAILS Tool taper: CT 40 Electrical data Voltage: 440 V Phase: 3 Frequency: 50/60 Hz EQUIPMENT Infinitely variable spindle speed Chip conveyor Internal coolant system

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Djdpfxjx A Uu Eo Ab Tsla Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Dsdpsx An Uxofx Ab Tola Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FML14BE06, travel distance X-axis: 850 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, The machine is completely unused! TECHNICAL DETAILS X travel: 850 mm Y travel: 530 mm Z travel: 510 mm Spindle speed max.: 10,000 rpm Spindle speed min.: 150 rpm Distance spindle nose to table: 150–660 mm Distance spindle center to column: 585 mm Spindle diameter: 70 mm Table Table size: 1,000 × 510 mm Number and size of T-slots: 5 × 18 mm Table load capacity: 500 kg Dlsdpfx Abex Ar Ucj Tea Feeds Rapid traverse X/Y/Z: 36 / 36 / 24 m/min Working feed: 1–10 m/min Accuracy Positioning accuracy: 0.01 mm Repeatability: 0.007 mm Tool Changer Tool capacity (arm type): 24 tools Tool shank: BT40 Tool change time (T-T): 2.0 s Drawbar: P40T-1 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Dimensions & Weight Footprint (W × D × H): 2,430 × 2,115 × 2,813 mm Machine weight: 5,800 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 83261, controller model: HACO BC59T Graphics, bending force (max.): 250 t, working width: 4,300 mm, distance between stands: 3,800 mm, TECHNICAL DETAILS Pressing force: 250 t Max. working width: 4,300 mm Distance between uprights: 3,800 mm Backgauge depth: 1,000 mm Number of axes: 6 (Y1, Y2, X, R, Z1, Z2) Crowning system: CNC-controlled Punch holder: Quick-release MACHINE DETAILS Control unit: HACO BC59T Graphics Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,300 x 2,900 mm Weight: 18,700 kg Transport packages: 1 pc. Dlodpfx Aex Ahktob Tja EQUIPMENT Finger protection CE marking

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Dimensions & Weight Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Weight: 22,000 kg Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Dlodex Agndspfx Ab Tja Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Djdpfx Abox D Igwe Tsla Milling

Condition: ready for operation (used), Year of construction: 2013, Auto CNC Lathe TORNOS DECO SIGMA 20/6 6 axis Year 2006/2009 (2x) /2011/2013 (3x) Controller : Faunc 31i c/w 3 meters bar feeder Installed power: 14 kva Technical Machine Benefits Max bar diameter: Ø 20 (25. 4) mm max workpiece length: 200 mm (turning with guide bush) Tool slide at guide bush: number of tool positions at guide bush (fixed or rotary): 15 Tool shank section: 16 x 16 mm Max. Number of cross rotary tools at guide bush: 4 Programmable rotary tool speed for s11: 100-6000 rpm Dodpfjxz Takjx Ab Tsla Max. Rotary tool drive power: 1. 5 (2. 2) kw Counter spindle and operations on the second side: max. Number of tool positions for second side operations: 11 Max. Number of fixed and rotary spindles: 4 Programmable rotary tool speed for s41: 100-6000 rpm Max. Rotary tool drive power: 1. 5 (2. 2) kw 6 units of Tornos & 1 unit of Tsugami as 1lot

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, TECHNICAL DETAILS Number of milling spindles: 1 pc. Number of controlled axes: 5 pcs. Type of milling table: Beam table MACHINE DETAILS Weight: 3,450 kg Dedpfxox Ahgus Ab Tsla EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2019, Main Drive Spindle speed range 35 – 12000 Number of axis 5 Movement X-Axis Movement 350 mm Dledpfjx D Hx Ejx Ab Tsa Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 300 kg This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 150610, brushing unit diameter: 180 mm, overall weight: 3,000 kg, workpiece height (max.): 100 mm, roller diameter: 400 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Electrical connection: 380 V, 20 A Dimensions (L x W x H): 5,600 mm x 2,400 mm x 2,100 mm Weight: approx. 3,000 kg Table size: 1,350 mm x 3,200 mm Maximum workpiece height: < 100 mm Polishing roller diameter: 400 mm Feed speed: frequency-controlled MACHINE DETAILS Serial number: 150.610 Number of units: 7 Brush length, unit 1: 1,500 mm Brush diameter, unit 1: 180 mm Infeed table length: 5,150 mm Outfeed table length: 5,150 mm EQUIPMENT Polishing unit with oscillating polishing roller Djdpfxox Ahd Ts Ab Tola Quick-change system for polishing rings Workpiece clamping with quick-release system Heavy-duty welded precision worktable SEW electric motors with energy efficiency class EFF1 (IE2) Optional vacuum clamping system available

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand SIEMENS Model Sinumerik 840D Ergoline Main Drive Number of axis 4 Additional Equipment Coolant pump 6 bar, 201 l/min Chuck rinsing device outside at main spindle Coolant equipment external on turning/milling spindle Hinged type chip conveyor, discharge height 1200 mm Cooling system for spindle motor, turning/milling spindle, and B-axis torque motor Connection for oil mist extractor Machine prepared for workpiece handling robot WH3 (front loading) Environmental packages for unstable supply and increased ambient temperature This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information. Djdpfxox D Sqaj Ab Tsla Application Types Turning

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2280 Measurements depth 3350 mm Measurements height 2500 mm Machine weight 7200 kg Main Drive Number of axis 6 Djdpfx Ajx D Eazsb Tola Movement X-Axis Movement 510 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm V-Axis Movement 210’ A-Axis Movement HSK 63 swivel angle 360 degree B-Axis Movement +/- 20 degree This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2700 mm Measurements depth 3770 mm Measurements height 3300 mm Machine weight 7000 kg Control Unit Brand MAZATROL Model matrix Nexus 2 Main Drive Dljdpfx Asx D S Theb Toa Spindle speed range 12000 rpm Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Media Chip conveyor Yes Additional Equipment Oil tank Through-Spindle Coolant General Data Measurements width 2700 mm Measurements depth 3770 mm Measurements height 3300 mm Machine weight 7000 kg Control Unit Brand MAZATROL Model matrix Nexus 2 Main Drive Spindle speed range 12000 rpm Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Media Chip conveyor Yes Additional Equipment Oil tank Through-Spindle Coolant This 5-axis Mazak VARIAXIS J-500 was manufactured in 2017. It features a Mazatrol Matrix Nexus 2 control, a Φ500 mm × 400 mm table, and can handle a maximum load of 200 kg. The spindle supports a BT40 tool shank and reaches up to 12,000 rpm. Dimensions are 2,565 mm × 3,225 mm × 2,840 mm, and it includes a chip conveyor and through-spindle coolant. Consider the opportunity to buy this Mazak VARIAXIS J-500 vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2018, condition: ready for operation (used), Control Unit Dledpsx D I Ubofx Ab Tja Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning