Used Non Ferrous Metal Separator for sale (44,179)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Isdpszrbxcofx Ahbstn Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Itjdpfxozrfirs Ahbsn Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Iedjzk Dzdepfx Ahbotn Back gauge type: Electric

Condition: used, Year of construction: 1995, Order No. 23066 Technical Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface sanding aperture approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact disc W 150 / D 200 mm - Drive disc W 150 / D 200 mm - Drive 400 V / 3 kW - Adjustable working height Itodpfx Ajwf Hppjhbjn - Motorized dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

Condition: refurbished (used), “Bakker Magnetics 29.723/12 – 800mm.” for Sale Manufacturer: Bakker Magnetics Itsdjw R N Tmopfx Ahbsn Type: 29.723/12 Belt widthness: 800 mm (New belt) Included: – New Control-unit

Condition: new, Year of construction: 1987, PowerCore dust collector Donaldson Torit CPV Type: CPV6 Unused Isdsxc Eyxjpfx Ahbetn Equipped with new filter cartridges See our other advertisements VMA Wekerom

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Ijdpfsxd Rgysx Ahbetn

Condition: good (used), Year of construction: 2010, machine/vehicle number: 89336, Offer 25433 Technical specifications: Itodpfx Ahsxx Sgkobon - Saw blade diameter: 350 mm - 2 saw blade spindle speeds: approx. 40 + 80 rpm - Cutting range at 90°: - round: 110 mm - flat: 120 x 80 mm - Cutting range at 45°: - round: 80 mm - flat: 80 x 80 mm - Mitre adjustment: left up to 45°, right up to 45° - Manual saw blade feed - Material clamping vice - Drive: 400 V / 1.8 / 2.4 kW - Coolant system - Space requirement: approx. W 1000 x H 1500 x D 1200 mm - Weight: approx. 300 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminal available Isdpfx Aexxl Hqjhbjtn -Price: per piece -Weight: 28 kg/piece

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data - Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  - Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 - Bottle Formats: 0,5L and 1,5L PET CSD - Cap Formats: PCO 1810 - Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label - Packaging formats: shrink wrapping with/without carry handle (3x2) - Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Ijdpeyb Sa Djfx Ahbetn - Application: CSD - Hygienic design - condition: good technical condition, dismantled - blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Itsdpfjyb Tucex Ahbsn Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Ijdpfjyb Tuiex Ahbjtn Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology Itjdpjycc Rpefx Ahben The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm Ijdjwqpmnjpfx Ahbetn

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Iodpfx Aowh U Avjhbotn - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Ijdjwiqukspfx Ahbetn Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Condition: good (used), Cintex CS4000 Metal detector checkweigher Stainless, combination metal detector checkweigher, belt dimensions 2100mm x 150mm, aperture 220mm x 100mm, weigh platform 350mm x 150mm, weight range 20g to 1Kg, pneumatic blow reject into reject bins, with spare belts, 1Ph Itodpfx Aswvbuzohbsn

Year of construction: 2000, condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg Iodpovxruxofx Ahbstn

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h Ijdpfovm U Dljx Ahbotn - Formats: - 0.210L, - 0.355L, - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 Itsdpewbz Daefx Ahbsn -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Ijdpfov Tpv Nsx Ahbotn Includes a roller conveyor.

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Itodpfx Ajv Aip Uehbon -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: good (used), Loma IQ3+ Metal detector Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm, 3Ph Ijdpfx Aox Ebinohbotn

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness copper (max.): 50 mm, sheet thickness brass (max.): 50 mm, total length: 2,000 mm, total width: 2,590 mm, total height: 2,150 mm, overall weight: 2,500 kg, input voltage: 400 V, warranty duration: 12 months, table width: 1,100 mm, workpiece height (max.): 50 mm, power: 13 kW (17.68 HP), workpiece width (max.): 1,100 mm, pass-through width: 1,100 mm, DM1100 2C Working capacity (mm): 1100×50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13 Current consumption (A): 30 Dust extraction port per head (Ø mm): 220 Dimensions (mm): 2000X2590x2150 Weight (kg): 2470 Itodpeyiyhlofx Ahbsn

Condition: excellent (used), 305 USED Jeros Sheet Metal Cleaner for 58x78 sheets (sheets without edges or with two edges on the short sides) TECHNICAL DATA: Itodpoyi Eqlefx Ahben - Power: 1.5 kW EXTERNAL DIMENSIONS (in cm): - Working width: 78. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.