Used Multi Spindle Automatic Lathe for sale (39,562)

Year of construction: 1999, condition: ready for operation (used), A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible. Crodpfex Aup Nex Ab Tjk

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on It is included barfeeder. Codpfxjxz R Ile Ab Terk

Condition: good (used), Year of construction: 1984, Schuette Multi-spindle automatic lathe Designation: Schuette SF 20-6 Cam-controlled Number of spindles: 6 Year of construction: 1984 Max. bar diameter: round 20 mm SW 17 mm AK 18 mm VK 14 mm max. bar feed: 80 /(160) mm Number of independent longitudinal slides: 6 Total / working travel (standard): 63/40 mm " " (special) up to: 100/63 mm Number of independent cross slides: 6 Total / working travel Middle and top slide up to: 32/20 mm Bottom slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max: 0.36/150 sec. Secondary times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in 2nd range: 355-2000 rpm Rated power of the drive motor: 15 KW Connected load: 50 kVA Speed of the drive motor: 1500 rpm Length * Width (in standard version) 3705 * 1320 mm Cedpfxjrrgr Uo Ab Terk incl. rod guide (in standard version) 6335 mm weight without bar guide and accessories approx.: 4.6 to. of the rod guide approx.: 0.5 to. total without accessories approx. 5.1 to. (all data according to manufacturer) Additional equipment: - Pick-up device with reverse machining - Threaded cutting gear - Separate control panel on operating and rear side - IEMCA bar loader

Condition: good (used), Year of construction: 1985, machine/vehicle number: 31601, turning diameter over cross slide: 18 mm, spindle bore: 38 mm, turning diameter: 280 mm, turning length: 550 mm, total length: 1,400 mm, total width: 900 mm, total height: 1,800 mm, overall weight: 800 kg, - Equipped with tailstock, Multifix tool holder - Includes HEIDENHAIN digital readout Crjdpfx Abewxq U Ao Tjk

Condition: repair required (used), Year of construction: 2001, Calpe TH-3-1200-CNC CNC controlled wood lathe Machines 3 workpieces simultaneously Cedpfx Aef Ezgqob Terk Technical specifications Maximum working length 1200 mm Maximum square 100×100 mm 3 workpieces machined simultaneously programmable template Designed for high productivity. Control Incomplete. The machine does not have a controller which is responsible for the programming and operation of the machine. Possibility to install a new controller to program the machine, paid service. Price to be negotiated.

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm Cjdpfx Aep Dux Tob Tjrk guide tubes 4,000 mm chip conveyor

Year of construction: 1999, condition: ready for operation (used), There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. Crjdpfem H Urhex Ab Tsk

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t Crsdpfx Aet Hw Atob Tsk dimensions of the machine ca. m

Condition: good (used), Year of construction: 1970, Gildemeister 6 spindle automatic lathe AS 32-6 - Spindle stop device - Pick-up device pneum. Accessories against surcharge Csdporrgr Aofx Ab Tork - Cross hole drilling device - Thread cutting gear - Thread cutting device - optional milling device, cross-cutting device - Saving conveyor Machine was overhauled at the end of the 80s

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1100026, spindle speed (max.): 3,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 4,500 rpm, number of slots in tool magazine: 19, Machine has been professionally cleaned TECHNICAL DETAILS Control: Siemens 840D Spindle Technology: Belt-driven spindle Spindle bore: 51 mm Speed: 4,500 rpm Workpiece clamping: Collet chuck, Hainbuch size 65 Tool Carrier I (XZ) Technology: Cross slide, 4 pcs Travel in X: 70 mm Travel in Z: 115 mm Tool mount: Turning tool holders Tool Carrier II (X/Z) Technology: Turret with 7 stations and pick-up spindle Tool mount: VDI30 Tool drive: 3,000 rpm Workpiece clamping (pick-up spindle): Collet chuck Travel in X: 160 mm Travel in Z: 500 mm Tool Carrier III Technology: Turret with 8 stations Tool mount: VDI30 EQUIPMENT Cjdewr Ducepfx Ab Tjrk - Chip conveyor - Coolant management, KSS pumps - Bar loader, Gucchi Giovanni DB Evo - Collecting tray with conveyor belt - Mechanically prepared interface for oil mist extraction - Electronic handwheel for setup mode - Clamping devices and tool holders are not included in the scope of delivery

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 Credji Hb Szepfx Ab Tsk High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS type: SAS16 new in: 1988 Crjdpfxevwmb Do Ab Tek equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Crsdpfxetqfq Ue Ab Tok

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Cedpfx Aein Ub Teb Tjrk Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Year of construction: 2018, operating hours: 7,879 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 8110000014B, A rebuild of the machine took place in 2021: - Change of bar feeder from Chucci to Iemca Next 25-33 - Change of control from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of valve block for hydraulic control of cooling lubricant supply (equipped with 28 controllable valves for high pressure) - an electronic parts shuttle for unloading the workpieces was installed - converted to a tool breakage monitoring system Artis / CTM program TECHNICAL DETAILS bar capacity: 36 mm number of main spindles: 6 number of cross slides X-Y axes: 6 C axes: 6 angular resolution: 0,002 ° Rotational speed: 7500 rpm rapid traverse: 40 m/min spindle positioning: 0,1° Drive unit tool speed: max. 13800 rpm MACHINE DETAILS Credpfx Aemduh Eeb Tsk working area: 21,9 sqm (with loader) net weight machine: 15 t chip conveyor: included LUBRICANT DETAILS oil tank volume: 1.800 l total oil volume: 2.000 l 6,3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 bar length: max. 3300 mm bar length: min. 2400 mm Loading capacity as area loader: 450 mm bar diameter: 4 - 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Condition: good (used), Year of construction: 1982, 6-spindle-automatic lathe brand: TORNOS type: AS14 new in: 1982 equipped with: sub spindel Credpevwmcusfx Ab Tok threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Cedpfstqfq Rsx Ab Tork

Year of construction: 2002, condition: ready for operation (used), A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible. Crjdpfx Abswr Dw Rs Tek

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Crjdpfx Absg S Tx Ie Tjk

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Crjdpfoxrfunox Ab Tjk Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Crsdpfx Abewa D Tuj Tok Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke Credpfxsv S H Uys Ab Tok 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: used, TECHNICAL DETAILS - Number of axes : 19 - Number of spindles : 6 - Number of counter-spindles : 1 SPINDLES - Max. bar diameter : 32 [mm] - Spindle speeds : 6000 [rpm] Csdpfx Abswuu Rtj Tjrk - Spindle power : 13.6 [kW] COUNTER-SPINDLE - Spindle speeds : 8000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 10100x1800 [mm] - Machine height : 2600 [mm] - Machine weight : 12000 [kg] MACHINE HOURS - Number of hours under power : 81250 [h] - Number of working hours : 31982 [h] EQUIPMENT - CNC : Fanuc 30I - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Cooling unit - Bar loader : Tornos MSF-832/6

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. Crjdpfjqhkuksx Ab Tek The machine is still in production. Viewing possible by arrangement.

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. Codpfxstty Nkj Ab Tork -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW