Used Moving Column Milling Machine for sale (67,662)

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Pjdpfx Asxwdygod Ssgn Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Pjdpfx Asvn N Hded Sogn Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: new, 2TR19H C3 FP KOYO TAPERED ROLLER BEARINGS NEW Dementions: 482.60 x 615.95 x 184,15 mm Weight 150 kg WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: NP342204-90WA2 TIMKEN x14 units 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 Podeqpgc Nspfx Ad Segn F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6

Condition: ready for operation (used), Year of construction: 2004, operating hours: 8,087 h, functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, table height: 925 mm, The machine has undergone a complete inspection, with the milling head and the telescopic cover of the X-axis repaired. Additionally, the control panel and the polycarbonate doors have been renewed, and the machine has been thoroughly cleaned. TECHNICAL DETAILS Travel distances X-axis: 5,300 mm Y-axis: 1,500 mm Z-axis: 2,000 mm A-axis: +45° to −225° B-axis: +165° to −18° Spindle data Spindle speed range: 60 – 5,000 rpm Tool holder: SK 50 DIN 69871 Spindle outer diameter (front bearing): 140 mm Spindle bore: 90 mm Table dimensions Clamping area: 6,000 × 1,200 mm Table height: 925 mm Feed rate: 10 – 6,000 mm/min Rapid traverse (X & Y): 15,000 mm/min Rapid traverse (Z): 10,000 mm/min MACHINE DETAILS Control system Manufacturer: HEIDENHAIN Model: TNC 530 Operating hours Spindle hours: 8,087 h Pjdpjxbd A Nofx Ad Segn Control system on-time: 3,785 h Machine on-time: 30,238 h Note: The machine has already been dismantled.

Condition: used, Year of construction: 2002, Technical details: x-travel: 16300 mm y-travel: 2600 mm z-travel: 1600 mm spindle taper ISO: 50 spindle turning speed range: 22 - 4000 U/min rapid traverse: 24 / 36 m/min main drive: 37 kW total power requirement: 50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets Pjdev Uzt Aopfx Ad Ssgn coolant attchament and chip conveyor *

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Travelling column machine Completely overhauled in 2025 Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 7 T-slot size to DIN 650 mm 18 Travels X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top – spindle nose min/max mm 150 / 850 Main spindle drive for speed 8000 rpm Pgedpfx Adew I Tm Ss Sen Tool holder SK 40 AC motor, frequency controlled kW 26 at 44% duty cycle Speed range: rpm 15 – 8000 Torque Nm 245 Internal coolant supply (IKZ) Chip conveyor with belt filter Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect measuring system Accuracy Positioning accuracy X, Y axis over 1000 mm: mm ± 0.0150 Repeatability X, Y axis: mm ± 0.0075 Positioning accuracy Z axis: mm ± 0.0150 Repeatability Z axis: mm ± 0.0075 Tool magazine 24 positions mounted on the left side of the machine - Tool stations 24 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control: Heidenhain iTNC530

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Pgjdox H Srljpfx Ad Ssn Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Vertical machining center, moving column machine with 3 axes Manufacturer: UNITECH Germany Model: CFS 2 Year of manufacture: 2001 Control: Heidenhain Travel (X Y Z): 1500 x 300 x 300 mm Psdjycfmyepfx Ad Sogn Table size: 1800 x 350 mm Spindle power and speed: 6000 rpm Tool holder: SK 40 Equipment: with internal spindle cooling Chip conveyor Design: moving column machine

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Podpfx Adswhd Ale Sjgn

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Pgedpjw Syv Ujfx Ad Son Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Year of construction: 2001, operating hours: 27,046 h, condition: excellent (used), functionality: fully functional, CNC traveling column milling machine in cast iron design Extremely stable design thanks to the X-axis with triple guidance and a fixed table. Machine will be delivered EXW. TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (triple guidance) Y-axis (traverse) linear guide: 1,000 mm (double guidance) Z-axis (vertical) flat guide: 1,500 mm (double guidance) Spindle speed range: 60 to 3,000 min-1 Tool holder: SK 50 Tool changer: 40-position Pull stud: DIN 69872-B Pgodpslhqkhjfx Ad Sen Drive power: 30 kW Tool dimensions: max. L=350mm / D=200mm Table size: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel Rapid traverse X, Y, Z axes: 10,000 mm/min Clamping area: 6,000 x 1,000mm T-slots: 22 H12 / spacing 130mm Central T-slot: 22 H7 MACHINE DETAILS Operating time: 62,774 hours (as of 11/2022) External coolant pump: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Electric handwheel Heidenhain - Swivel machining function monitored with light barriers - New X-axis covers - Chip conveyor, 2-stage - New milling head bearings, 2021 - Operating manual / documentation CONDITION - Service and maintenance have been performed according to schedule - Geometry is in good condition - Suitable for swivel machining Machine available from July-August

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Podpfx Asxup Iqsd Segn Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Podpfx Adsx Aph Hs Segn Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Pjdpfx Adoy Uiyvj Segn Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Pedpfx Adsy Uuuxj Segn Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Psdpfx Adoy Ni Ivo Ssgn Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Pjdpsxxb Rrofx Ad Sjgn Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Pgedpfx Aex D Tbmsd Sen Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Psdszcxwrspfx Ad Segn Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking Pjdpfx Aezdfgpod Segn

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement. Pgsdpfx Aszcqncod Sjn

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Pgedpfx Aozd Rizod Ssn Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, Year of construction: 2018, machine/vehicle number: Q4A181101, SIEMENS SINUMERIK 828d control system, travel ranges X/Y/Z = 350/250/300 mm, weight 2,030 kg, RITTAL control cabinet, 24-position tool changer SK30, rigid tool clamping plate, chip conveyor KABELSCHLEPP, coolant system. Pgodpoy U R Rcjfx Ad Son

Condition: good (used), Circular platform for horizontal and vertical mounting. Pgjdpfxozhf Ade Ad Son Diameter: 400 mm.

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. The machine is currently powered on and can be inspected by appointment. Psdezfgmxepfx Ad Sjgn Additional photos and technical information are available upon request.