Used Monorail for sale (32)

Year of construction: 1987, condition: refurbished (used), Span approx. 40,00 m Jib unilateral, fixed leg side, total approx. 6,5 m Isdpfx Afomdruzsfetr Lifting height/hook path approx. 8,0/10,0 m - Single rail trolley SWF - Radio remote control and floor control

Year of construction: 1995, condition: excellent (used), MONORAIL HANGER SHOT BLASTING MACHINE WITH WETFILTER Itodpfx Afed Hp Sqefer Designation: Monorail Hanger Shot Blaster Brand : Schlick Type: DHB 12/14 Workpieces ø: 1.200mm Workpieces High max.: 1.400mm Charge max. kg: 500kg Shot Wheel: 3 Pieces with 7,5kw with Drivers Consisting of: - Monorail Hanger Shot Blaster Typ: DHB 12/14 - O-Hanger System with Workpieceshangers - Main Panel - Wet Filter Wir bieten auch Ersatzteile für Rösler, Schlick, Wheelabrator, Gietart usw. Strahlanlagen an! We can offert for spare Parts for Rösler, Shot Blasting Machines!

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration Iedpfx Aoxqzmkoffetr - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: CLX25 06 2 320 6, operating hours: 250 h, Electric chain hoist with frequency-controlled electric trolley, 20/5 m/min., 2-stage hoist, 6.3/1 m/min., 8 m hook travel with chain magazine. Itodpfx Afowdrgkjfer

Condition: new, functionality: fully functional, Profile rail guides from Schneeberger - MONORAIL 4S _____ Product details: • Manufacturer: Schneeberger GmbH, Germany • Model: MONORAIL 4S • Type: Profile rail guides Isdpfx Aev Hbu Doffotr • Length of rails: 3700 mm • Suitable for Y and X axes (CNC machines, automation, precision engineering) Specifications of the sets: 1. Set for Y axis: • 1x MR 45-B2-1887,5-A-25-25-G1-V3-GP • 2x MR 45-B2-1887,5-25-25-Q1-V3-QP • Drawing: 9.37.015.0.11.20.0 2. Set for X axis: • 2x MR 45-B2-4305-C-26.25-26.25-G1-V3-GP • Drawing: 9.37.015.0.12.25.0 Components included: • MR 45 profile rails • Plates and accessories (AMSA, ZCV, SLWGP1, SLSGP1) • Manufacturing status: MONORAIL 4S Condition: New and in original packaging Location: 21509 Glinde, Germany

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Iodpfx Afsq R Rf Aofstr

Year of construction: 1991, condition: refurbished (used), Track gauge currently approx. 42.5 m Outreache fixed support usable/total approx. 10.0/16.5 m Lifting height approx. 8.0 m - Two Demag trolleys that can be moved separately and together monorail trolleys - Radio remote control and emergency control Itedpfx Ajmdrxaeffor

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min Ijdpfxjx I N Efo Affjtr stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Year of construction: 2006, condition: like new (used), Span approx. 8,6 m Total height/lifting height approx. 5,2/4,2 m Total hook path approx. 20,0 m Operating hours only approx. 88 Year of manufacture 2006 Crane equipped with: - STAHL monorail trolley of short design - Load display Itjdpfxjfd Rx Ro Affsr - Radio remote control

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. - With a shared sliding door with the spray booth. Itsdjx H Rhrspfx Affor - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: new, 🚀 Modular powder coating systems with bar transport system Our modern painting systems with bar transfer systems offer maximum flexibility with minimal space and energy consumption. All process steps – from pretreatment to oven drying – can be carried out in a single, continuous line. Itsdpfx Afjdy Ezdjfsr 💡 Ideal for the following applications: Powder coating and wet painting Sandblasting Chemical pretreatment Baking and cooling 🔁 Intelligent transfer system The transport system moves the workpieces safely and efficiently through all stations of the system: Manually or motor-operated Optionally with a lifting device for heavy workpieces Parking stations for buffering and intermediate storage Compatible with automatic paint booths and walk-in booths The movement is fully automated with a continuously variable drive that enables precise control of cycle times. 🏗️ Structure & Components: Monorail conveyors for longitudinal movement Cross-guide units for direction changes Mobile carriages with product holders Load-bearing steel structure for continuous loads Control via control panel with speed control ⚙️ Efficiency through sophisticated design The system allows contactless handling – the workpiece is suspended at the loading station and remains in the same position until removed. This ensures consistently high quality and minimizes handling times. 🔧 Lifting device for loading and unloading The integrated bar lifting device enables ergonomic and safe working with heavy parts. Operators can precisely position the lifting bar at the push of a button (raising/lowering) – ideal for large components. ✅ Your benefits at a glance: Fully automated material flow For workpieces of any size and weight Reduced space requirements Minimal maintenance, maximum service life High energy efficiency Adaptable to your individual requirements This solution is perfect for modern coating processes where flexibility, ergonomics, and efficiency are paramount. Our experienced engineering teams will adapt the system precisely to your production requirements. 👉 Contact us for a customized solution or visit our website for more information.

Condition: new, INA KUSE 30 L W1 G3 V1/700-30/30 ball monorail guidance system, set = 2 pieces, unused in original packaging, 100% functional, scope of delivery according to photos Isdpei Ec Hajfx Affotr

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Itodpfx Afsct Dhaofer Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Year of construction: 2004, condition: excellent (used), Belt Monorail Shot BBlaster Brand: Rösler Drum ø: 400mm Ijdpjn E Tubefx Affstr Pieces length max.: 700/1000mm Pieces max. kg: 12 kg Loadingcapazity: 100kg Wheels: 4 Pieces á 7,5 kW Total Power : 45kW Garantie: 6 monatige Funktions- und Gewährleistungsgarantie bei Inbetriebnahme durch DECK Sarl. Ersatzteilversorgung für die nächsten 10 Jahre OPTIONAL: Lieferung in Ihr Werk Richtmeistermontage / Inbetriebnahme / Schulung

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation expandable to full gantry crane Iodpjmdrt Sjfx Affstr span approx. 8.5 m hook paths approx. 6,0 m DEMAG monorail trolley Floor control system

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Itsdpfjxpiw Ujx Affjr Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Characteristics: Capacity: 60 T Cat 1 – 32 T; Cat 2 – 40 T; Cat 3 – 32 T and monorail cat 2 x 5 T Span: 27.45 m Lifting height: 16.33 m Isdpjxlpnrofx Affstr

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) Iedeuch Rfjpfx Affstr 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Iedpjh Ad Saefx Affotr Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: like new (used), functionality: fully functional, ABUS Monorail Hoist Type GM3063, almost as new Stored as reserve stock, likely overhauled or new, no documentation! Nearly new condition No wear on rope and rope guide, load hook/block, running wheels, control cabinet/control system, or control pendant Itsdov Uvdpjpfx Affor Complete with travel carriage (2 travel motors Type GE 1200) Lifting capacity: 6.3 t Reeving: 4/1 Lifting speeds: 0.8 / 5 m/min Duty classification: 3 With two travel motors From a large spare parts stock of DEMAG / ABUS / STAHL, see also my other listings Info: Over 20,000 DEMAG spare parts in stock! Check out my other warehouse stock offers as well!

Year of construction: 2016, condition: excellent (used), Span current/extendable approx. 8,0/12,0 m Lifting height current/extendable approx. 10,0/changeable m Make/Reconstruction DEMAG/TEICHMANN Year of construction/Operating time only approx. 2016/2 Jahre Stress group H2 B3 Crane equipped with: - DEMAG monorail trolley, short design in M5 - Radio remote control - Trolleys optionally available with wheel flange guide on Itedpjqcu T Uefx Affor flat iron rail or barrier free steel plate slat

Condition: new, Year of construction: 2025, HORIZONTAL POWDER COATING LINE FOR ALUMINUM PROFILES We are adding value to your production. * Conveyor speed up to your capacity per day Aerial conveyor - monorail or power&free type Automatized powder coating booth, metal or PVC antistatic structure Reciprocated automatic powder coating equipment system Tunnel type polymerization oven - gas, diesel or electrical heating source Made in Türkiye CE Mark Isdpfxsvv Nh Rs Affjtr We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension Itodpfx Aohrkrteffsr 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Year of construction: 2002, condition: excellent (used), machine/vehicle number: SI4to, ! bargain price ! Vetter / steel bridge crane crane runway overhead crane gantry crane monorail Type P300S Length of steel construction approx. 4.2 x 2.6 m Outside edge of portal approx. 4.2x2.6m, inside edge of portal approx. 3.7x1.9m Lower edge of the bridge approx. 3.8m, hook height 3.2m max construction height (OK) of the system approx. 4.6 m Lower edge purlin / bracing approx. 3.57 / 4.2 m Track HEA340, supports square tube 200x200mm Ledgers / purlins IPE240/HEA340 Steel hoist SH5025-20 4/1 BJ 2001, lifting height approx. 8m support spacing: Running track with overhang length approx. 6.5 m Payload / lifting capacity 4000 KG / 4t incl. power supply rail, control cabinet and corridor control Connection to 400V 16A Very good condition Iodpfx Afoktkzbefotr Year of construction 2004, complete crane book is available Shipping by courier, collection preferred Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Running rails can be extended to length x Isdpju I U Anjfx Affotr Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.