Used Model Milling Machine for sale (90,246)

Condition: ready for operation (used), Year of construction: 1998, Spindle moulder T150 with power feed – €5,500 Spindle moulder T130 with power feed – €3,500 SAC spindle moulder with power feed – €2,500 Crjdpfxex Av Aqo Ab Tjk

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm Cjdpoxy Styofx Ab Terk T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Cedpfx Abjx Aupij Tjrk

Condition: used, Year of construction: 2015, operating hours: 1,603 h, functionality: fully functional, machine/vehicle number: MV0062-000372, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, type of input current: AC, overall weight: 15,000 kg, Equipment: USB port, Doosan DNM 750 II – CNC Machining Center – Excellent Condition – Available in 2 Weeks The machine is currently running in daily production, accumulating hours, and can be demonstrated live during inspection. It has been professionally maintained and shows no mechanical or electronic issues. Crjdpfjx Ar Dqox Ab Tek Machine Condition - Fully functional, operates flawlessly - Clean and well-maintained - No vibrations, spindle issues, or alarm errors - Ready for immediate demonstration - Delivery possible in approx. 2 weeks Important Notes - Sold without accessories (no tool holders or workholding included) - All documents and technical information available on request - Ideal for machining steel, aluminum, and engineering plastics Additional Information - The machine can be inspected under power - Cutting test available on request - Loading and transport can be arranged at buyer’s cost

Condition: used, machine/vehicle number: 38206/12, Slot milling machine for sale. 2.2 kW 220/380 V 50 Hz Csdpfx Aox Arwksb Terk

Condition: used, Year of construction: 1995, Universal CNC milling machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Cedpev Rxa Sefx Ab Tsrk Travels X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece sensing) Vertical-horizontal milling device Quill Coolant unit Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg Codpfx Asxy Ntqob Tjrk The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm Crjdjxy Nlmopfx Ab Tek table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Crjdpfxoqagugs Ab Tsk

Condition: excellent (used), Year of construction: 2017, operating hours: 2,132 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 10,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 5 h, We offer in perfect condition Hermle C400U. X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Spindle HSK-A63 38 tools ATC Credpfx Aboxy Itco Tjk Machine has Heidenhain 640 control and only 2100 running hours. Please not machine doesn't have internal coolant or chip conveyor.

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. Csdpfx Absibd Alj Tjrk We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Cedpov Rpr Ssfx Ab Tjrk Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Year of construction: 1965 X (mm): 1000 Y (mm): 600 Mounting (iso/mk): 4 Power (kw): 2 Crodpfeq Ixz Rsx Ab Tjk

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M Crsdpfsxy Nilex Ab Tok table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 155, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Crodpfspcf D Iox Ab Tok

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V Credow E Tzrjpfx Ab Tek - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours Cjdpevanqxjfx Ab Tork - WITHOUT tools

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 320 mm, spindle mount: MK 1, type of input current: AC, rotational speed (max.): 1,600 rpm, rotational speed (min.): 130 rpm, overall weight: 50 kg, spindle motor power: 250 W, year of last overhaul: 2023, Equipment: documentation/manual, rotational speed infinitely variable, HOBBYMAT BFE 65 PRECISION MILLING MACHINE WITH EXTENSIVE ACCESSORIES For sale: Professional Hobbymat BFE 65 milling machine in perfect condition, including comprehensive accessory package. This East German precision machine (circa 1985-1992) has been lightly used for hobby work and never deployed industrially. SPECIFICATIONS: • 4-speed gearhead: 315, 560, 900, 1600 rpm • Motor: 0.25-0.29 kW with KIMO digital frequency inverter • Table travel: 160 x 450 mm (X-Y axes) • MT1 spindle taper • Digital readout (DRO) system on table • Complete documentation included COMPREHENSIVE ACCESSORY PACKAGE INCLUDED: ✓ Precision rotary/dividing table with 4-jaw independent chuck ✓ Complete T-slot clamping kit in red case (clamps, step blocks, studs, nuts) ✓ Precision milling vise ✓ Multiple HSS drill bit sets in wooden storage blocks ✓ End mill set in wooden storage ✓ Countersinks, center drills, reamers ✓ Tool holders and MT1 arbors ✓ Complete manuals (German) CONDITION: Great condition, well maintained, all functions operate excellently. Machine is fully operational and is currently connected and ready for a demo in Apeldoorn The Netherlands. It will be moved to conditioned storage in Zoetermeer The Netherlands before Christmas. Crjdpfx Ajx Ak Rieb Tsk PRICE: € 3,000 (complete package, not separable) Collection: Currently Apeldoorn NL, soon Zoetermeer NL A complete, professional milling setup in close to perfect condition. The comprehensive accessory package alone is worth €800-1200. This East German precision machine with digital control and DRO system provides you with all necessary tools and work holding for professional work immediately. Interested? Contact me for viewing!

Condition: used, The machines are in good condition. Crodpfextflcjx Ab Tjk

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Csdsxyxlcjpfx Ab Terk Motor Power: 20.1 hp

Condition: good (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 850 mm, feed length Y-axis: 520 mm, feed length Z-axis: 510 mm, The machine is in good technical condition. Travel ranges x, y, z: 850 x 520 x 510 mm Table size: 1000 x 510 mm Maximum table load: 500 kg Distance from spindle to table: 150-660 mm Distance from bed to spindle center: 585 mm Rapid traverse rates x/y/z: 30/30/24 m/min Speed range: 80-8000 rpm (10k/12k/15k optional) Spindle taper: 40 BT / CAT CNC control: SINUMERIK Maximum tool diameter: 76 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg Tool change time: 6 sec. Bidirectional automatic tool changer: 24 double arm type (option for 20-32) Rigid tapping cycle Helical interpolation Machine weight: 5,500 kg The machine includes a chip conveyor. Inspection under power is possible by prior arrangement. Crjdpfx Abjx Akfys Tjk

Condition: used, Used machine Year of manufacture: To be announced Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale at the front - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Dust extraction ports at top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm Credpfx Absxllw Ae Tok - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction diameter: 150/120 mm - With 4-roller power feed unit Weight: 600 kg Availability: Short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,917 h, functionality: fully functional, Myford Super 7 lathe for blacksmiths, single-phase. In good working condition. The Myford Super 7 lathe for blacksmiths is single-phase and has been used exclusively for hobby work. It is equipped with a Norton gearbox and mounted on a genuine Myford stand. The lathe comes with a variety of accessories listed below. Accessories included: - Norton gearbox - 4-jaw chuck - Tailstock with chuck - Various chucks and keys - Reamers (various) - Thread files - Cutting tools - Vernier calipers (various) Cedpfx Aex Akcfjb Tsrk - Internal micrometers (many different sizes) - Thread gauges (BSF, BSW, metric, etc.) - Thickness gauges - Perun arc tools - Spiral drills with 1MT - Center drills - Live center - Rear tool post - Blocks - Faceplates (various)

Condition: good (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, The machine is in good technical condition, with the possibility of testing upon agreement. Width: 6,200 mm Depth: 4,000 mm Height: 2,870 mm Machine weight: 17,000 kg X-axis travel: 2,500 mm Y-axis travel: 1,300 mm Z-axis travel: 1,200 mm CNC control: Heidenhain Option to purchase with or without tooling. Credox Akclepfx Ab Tsk

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable Credpfx Asw I U U Dsb Tsk - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim