Used Model Milling Machine for sale (71,745)

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Lrodpfx Aaodzqb Sjgoh Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication Ledpfx Aew Ed U Nsagjrh - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) Lrsdpfxsv Amrye Aagsh - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable Lrjdpfx Aaoiy Ekvsgjh - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head Lredpfjifu Arjx Aagjh - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B Lrsdpfx Aash Ic Ufogoh spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head Lrsdsdzp T Eopfx Aageh - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: used, Year of construction: 2007, number of spindle speeds 6.000 U/min tool taper BT50 numbers of positions in the tool changer 121 control FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Lredpfx Aet I Ec Dsageh Additional equipment: + Full NC table 360.000 * 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine Lrjdpfx Ajwnbfkjagsh -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: excellent (used), x-travel 450 mm y-travel 175 mm z-travel 400 mm spindle turning speed range 60 - 2800 U/min tool taper ISO SK-30 weight of the machine ca. 1 t Lrsdpfx Aovwgn Deagjh dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices Lrjdpfx Aajylpzyjgeh - Documentation

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 Lredpfx Aoylmh Doagsh >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: excellent (used), Year of construction: 2021, 2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine Ljdpfeym Apyjx Aagerh Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg.

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Ljdpfxsyll A Tj Aagorh Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: good (used), Year of construction: 2007, operating hours: 1,211 h, functionality: fully functional, machine/vehicle number: Q1FV4302, table load: 20 kg, overall weight: 700 kg, 4-Axis Milling Machine Emco Concept MILL 155 – for Small Parts Production Description Manufacturer Ljdpfxeymy R Ie Aagsrh Emco Model ConceptMill 155 Year of manufacture 2007 Specifications: Travel X-axis: 300 mm Travel Y-axis: 200 mm Travel Z-axis: 300 mm Min. distance spindle nose – table surface: 85 mm Max. distance spindle nose – table surface: 285 mm Table dimensions (L x W): 520 x 180 mm T-slots: number, width, pitch: 3 x 12 x 45 mm Max. table load: 20 kg Max. feed force: 2500 N Number of tool stations: 10 Tool selection: directional logic Max. tool diameter: 70 mm Max. tool length: 200 mm Machine dimensions (L x W x H): 1502 x 1284 x 1925 mm Weight: 700 kg Required compressed air: 6 bar Additional equipment Walter NC indexing device

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Series : B20 . Ledpsymy D Uofx Aagerh

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg Lredpfxjyliffs Aagsh >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Lrodpfsymxi Aex Aagjh Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: not inspected (used), Friedrich Deckel E2 Universal Tool Milling Machine ----- Condition of the item: The machine comes from a company closure and was taken over by us without prior inspection. Lrodpeymxdyofx Aagoh The sale is therefore explicitly as a hobbyist/project machine or for refurbishment or spare parts recovery. Only the parts visible in the pictures are included in the scope of delivery. No further accessories are available. Internal number: 26.144

Condition: used, Year of construction: 2005, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 turning speed range - spindle 50 - 4.000 U/min transmission ratio 2 drive capacity - spindle motor 6 kW tension force 10 kN swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m Lrjdpfoylcpqsx Aagoh Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Lodpfxju Tln Ns Aagjrh Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Year of construction: 2020, Sub-spindle, Y-axis, C-axis FANUC 31i B5-NT-SmartX control Turning diameter max 305mm Turning length -870 mm Main-spindle speeds 6'000 rpm Sub-spindle speeds 6'000 rpm Milling head B-axis +/- 95 ° Ljdpfx Aaoyla Spjgorh Tool changer with 72 positions Turret head: 24 positions with 12 driven positions Tool presetting device Workpiece pick-up attachement Tool breakage control device Bar loader Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Milling area as per stop and template 340 x 100 mm Stroke 110 mm Lower milling unit: Milling area as per stop and template 240 x 85 mm Front stroke 95 mm Rear stroke 45 mm Milling spindle speed 12,000 rpm Profile clamping range 115 x 100 mm Electric connection 230/400 V, 3~, 50 Hz Output per motor 0.74 kW Compressed air connection 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Lodpeymr Ifofx Aagjrh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Lrjdpfx Aasylawxegjh

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Lrjdety A Ehjpfx Aagsh Very good condition