Used Mineral Wool for sale (339)

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Nwedpoxfwdefx Ahvod Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet Nedpfxjd Hkqhs Ahvowd - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Nodpsd E R D Sefx Ahvowd Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Nsdpfx Aedwktkohvowd Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Noded Nnwljpfx Ahvewd Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Njdpfsx Af Rdox Ahvswd Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Nwedpfxjchqxxj Ahvjd Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, mileage: 553,732 km, power: 353 kW (479.95 HP), first registration: 07/2011, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 13 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 917 mm, Year of construction: 2011, Equipment: ABS, air conditioning, had accident, parking heater, 1. Vehicle Base * Wheelbase: 1795 mm * Rear frame overhang: 800 mm * Engine: D2676LF07 – 480 HP / 353 kW – EURO 5 SCR – 2300 Nm * Transmission: ZF 16 S 252 OD * Fuel tank: 400 l right side + 35 l AdBlue * Front axle: VOG?09 / VP?09 powered * Front suspension: parabolic 9.5 t * Rear suspension: trapezoidal 16 t * Dual axle configuration * Instrument cluster: km/h Base-Line 2. Cab & Interior * Cab: M (2240 mm wide, 1880 mm long) * Seat covers: comfort quality * Driver’s comfort seat, air-suspended, ventilated, lumbar support, heated * Passenger seat: static, adjustable length and backrest * Cab suspension: air-suspended * Driver’s seat armrests * Storage box + drawer in dashboard * Electric windows * Sun blind for windscreen * External sun visor * Grab handles on A- and B-pillar 3. Climate, Comfort & Electrical * Air conditioning: AC R134A * Auxiliary air heater: Eberspächer D4S * MAN Tronic onboard computer * MAN BasicLine radio 24V * CB radio antenna + car phone antenna * Central locking * 12V & 24V sockets in cab * Reading lights, driver/passenger * Entry lighting * Headlight range adjustment 4. Drivetrain & PTOs * Switchable front-wheel drive * Transfer case: G172 * Front axle differential lock + buzzer * Rear axle differential lock * Axle ratio: i = 4.33 * EDC engine control * PTO NH/1C without flange * Fine dust and pollen filter 5. Brakes & Safety * MAN BrakeMatic * ABS * Drum brakes front & rear * Two-line brake system * Pneumatic parking brake * Reversing alarm (switchable) * Speed limiter: 89 km/h * Cruise control * Roof-mounted work light, left * Additional high beam and fog lights * Halogen twin headlights H7 * Position and marker lights 6. Hydraulics & Tipper Equipment * MEILLER axial pump 296/54 * Tipper controls inside cab * Controlled tipper lever brake (EVBec) * Hydraulic connection rear for 3-way tipper trailer * Hydraulic mineral oil 7. Body: MEILLER Tipper Body D421 * Tipper body: 6000 × 2380 mm * Platform floor VS120 – 7 mm * Side panels M-JET VS100 – 4 mm * Side boards: 900 mm * Bordmatik left * Pendulum tailgate with automatic locking * Chute: 350 mm * Fixed corner posts * Front wall deflector plate: 500 mm * Access steps front wall Nwedjyix Drepfx Ahvsd 8. Frame, Protection & Accessories * Rear underride guard, foldable * Three-piece steel bumper * Trailer coupling: RINGFEDER 5050 A * Crossbeam for trailer coupling * Front mud flaps * MEILLER plastic fenders * Spray suppression device 9. Electrics & Controls * Batteries: 2 × 175 Ah * Alternator: 28V 80A * Trailer sockets: 24V 7+7-pin + ABS socket * Operating data display * Boost pressure gauge 10. Tyres & Wheels Front axles: * 2 × 385/65 R22.5 steer-S+G TL 160K * 2 × 385/65 R22.5 steer-S+G TL 160K Rear axles: * 4 × 315/80 R22.5 HSC1 TL 156/150K * 4 × 315/80 R22.5 HSC1 TL 156/150K * Technical gross weight: * Net weight: * Permissible trailer weight: * Total length: * Wheelbase: 1795++ mm Vehicle number: 11798 Subject to errors and prior sale. Advertising and various captions have been digitally removed. We are pleased to assist you with all formalities that arise when purchasing a vehicle. Just let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing

Condition: as good as new (ex-display), Year of construction: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Nedefci D Aopfx Ahvowd Your benefits: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine Including control cabinet with timer operation The press is switched on manually and will run until the set time on the timer (e.g. 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square), Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H), Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V, 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% ATRO - Sand, stones, metals, and minerals increase wear --- Optional upgrades (at extra cost): - Timer function + €490 net Machine is started manually and switches off automatically after preset time X. - Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt version Motor then 3 kW instead of 2.2 kW Surcharge + €690 net (delivery time approx. 8 weeks) ---

Condition: as good as new (ex-display), Year of construction: 2024, Special-purpose machine for plastics shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between rotor and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Nwsdpfxjd H R Sxe Ahvod Control: PLC Cutting chamber opening at the top: 600 x 800 mm Maximum recommended input material size: approx. 500 x 500 mm (*height less critical) Hydraulically actuated pusher Screen perforation options: 25 - 40 mm For plastics, coarser screens are recommended (30-40 mm) *For finer granulation, a two-stage shredding process with downstream granulator type MVZ (screens 5-15 mm) is recommended Exhaust port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Additional options available at extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor discharge): + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm): + €8,770 net - Overbelt magnet: + €5,980 net - Conveyor and overbelt magnet control: + €2,750 net (synchronized start/stop with shredder) - Alternatively, manual start/stop function at conveyor: + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. will result in increased wear We are happy to offer a free test using your material at our facility in Neckartailfingen. Alternatively, you may send your material to us via freight forwarder and we will document the test using photos and videos. --- * Only for brittle plastics of medium hardness. * Not suitable for elastic or extremely hard and heavy plastics – this will negatively impact the durability of the system. --- Optional: Larger machine sizes available Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening at the top: 800 x 1,000 mm Maximum recommended input material size: approx. 720 x 700 mm (*height less critical) From €39,995 net (*options subject to additional cost) Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening at the top: 1,000 x 1,000 mm Maximum recommended input material size: approx. 900 x 700 mm (*height less critical) From €49,975 net (*options subject to additional cost) Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening at the top: 1,300 x 1,200 mm Maximum recommended input material size: approx. 1,200 x 700 mm (*height less critical) From €79,975 net (*options subject to additional cost)

Condition: used, Year of construction: 2007, 4-axis CNC horizontal milling machine Hüller Hille BlueStar5, year of manufacture 2007. Automatic pallet changer with 2 exchange pallets, each with 4 vices (125mm), 4 additional exchange pallets (one with a mineral cast clamping tower), Renishaw measuring system, high-pressure coolant system with additional filtration, coolant and air through the spindle, 40-position tool magazine BT40. Nodpfx Ahsw D Sbnevowd

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C Nwedpfeb Ny Eyjx Ahvsd - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: used, Year of construction: 2017, Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm Njdex Ti R Ejpfx Ahvswd

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Njdou Nph Ispfx Ahvewd

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors Nwjdpexch Acofx Ahvjd

Condition: used, Year of construction: 2004, Overview This NATE Veral 60 bottle filling machine was manufactured in 2004 by the Czech company NATE. It is currently installed in a mineral water company in Germany, where the line also handles contract bottling. As a result, the machine is equipped with multiple detection systems and supports various bottle formats. Please note: The machine does not include a closer or corker. Technical Details Manufacturer: NATE (Czech Republic) Model: Veral 60 Year of Manufacture: 2004 Number of Filling Stations: 60 capacity: 20.000 bottles/h Filling Method: Counter pressure (overpressure) Bottle Formats: 0.25 L Vichy 0.5 L Set 1–3 0.7 L GDB 0.75 L GDB Condition: Well-maintained, fully operational Nwedpoyb Si Sofx Ahvjd

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Nodpfxotuyq As Ahvjwd

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc): 16 rinsing heads 16 filling heads 1 crowning head Scope of Delivery  Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts DE filter | Spadoni | - | 2011 | 80 hl/h Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules   Nsdpfx Ajyb Tkdohvowd

Condition: used, Year of construction: 2004, Overview  The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details  Output: 16,000 - 20,000 bph Formats:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line Nwedpfx Ahexb A Ideved

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Nsdpfx Aotuyq Rjhvjwd

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Nedpfxewhvc Rj Ahvjwd

Condition: used, Year of construction: 2016, Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data Brewhouse System – Inox GC (1,500 L) Capacity per batch: 1,500 L Vessels: HLT, mash/lauter tun, kettle/whirlpool Material: AISI 304 stainless steel Heating: Compatible with automatic gas burner Includes: Temperature control panel, integrated pumps Isothermal Mash & Whirlpool Tun (2,000 L) Capacity: 2,000 L Insulation: 50 mm rock wool Features: Hinged lids, agitator with VFD, CIP system, PT100 probe Isothermal Lauter Tun (2,500 L) Capacity: 2,500 L Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic rake, CIP system Insulated Hot Water Tank (1,800 L) Capacity: 1,800 L Heating: 9 kW electric element Features: Rock wool insulation, 50 mm inlet/outlet, CIP system Process Equipment Wort pumps (helical & transfer) Tubular heat exchanger (removable) Hop filter Automation panel with VFDs Automatic Gas Burner – AEM GR8 PHP (2016) Type: Circular gas burner, automatic ignition Nwedpsyb S D Nefx Ahvjd

Condition: used, Year of construction: 2004, Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle Nwsdjxrfzhspfx Ahvjd

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Nwodpfjuca Amjx Ahvod

Condition: used, Year of construction: 2001, Overview  This flash pasteurizer was manufactured in 2001 by German company Krones / APV. The unit was previously operated in a mineral water production facility in Germany. Following the replacement of the complete line, the machine was dismantled and sold individually. It is available immediately and currently in stock. The reason for sale is a line upgrade. Technical data Type: Flash pasteurizer (short-time heating system) Application: Alcohol-free beverages / mineral water Capacity: Guaranteed throughput up to 22,000 l/h Adjustable down to 10,000 l/h Process design: Plate heat exchanger with regeneration, heating, degassing and cooling sections Integrated degassing unit Buffer tank with internal circulation Electrical connection: 230 / 400 V, 3 Ph, 50 Hz Control voltage: 24 V DC Execution: Stainless steel construction CE-compliant according to EU machinery directives Control & instrumentation: Measurement and control technology PLC-based control system Electrical cabinet Interfaces: Mechanical and electrical interfaces according to Krones / APV standards   Nwsdoyb Sw Ajpfx Ahved