CNC lathe

MT EVO (MT Rent) T30MC Siemens ShopTurn

Condition: excellent (used), diverse steady rests Dedjd E Tb Eepfx Adaekk

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system. Dkodstv H Ucepfx Adask

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Dksdpfx Adoh Tnpxoaek

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right Dsdop Scqyopfx Adaekk -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm Dkodsugnxdopfx Adaek turning length 3055mm +/-0.3mm mm

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m Dkodpswlhvwsfx Adaok 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: excellent (used), Year of construction: 2016, operating hours: 4,850 h, DMG Mori Ecoturn 510 V4 CNC Lathe In very good condition, year of manufacture 2016. Machine specifications: Maximum spindle speed: 3,250 rpm Dkjdpfxoydvcbo Adajk Spindle bore: 103mm Bar capacity: 76mm Distance between centers: 1,150mm Swing over bed: 680mm Swing over cross slide: 465mm Hydraulic chuck size: 250mm Equipped with: VDI40 turret with 12 stations Chip conveyor High-pressure coolant Siemens control Hydraulic chuck Maximum machine dimensions including chip conveyor: 5,320 x 1,809 x 2,161mm (including signal lamp, excluding control panel) Weight: approximately 6,700kg The machine is supplied with various holders, driven tools, turning tools, drills, and other accessories in a neat tool cabinet. All manuals and electrical diagrams are also included.

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Dedpfx Adewc A Rkoaskk

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, controller manufacturer: FANUC, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. • V3 Version (No counter spindle, no y axis) Dkodpfx Adoyu Sc Esaek • no bar loader

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Dkedpfoym Ef Rjx Adaok Full specifications available in photos Machine in excellent condition