Used Mikron Wf 72 C for sale (191)

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 Ljdpfx Afskzpngefota -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Ljdpfx Afsrywgzjfeta Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Cooling device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Ltjdpecmzzgefx Affea Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Ljdpswit Rhsfx Affeta Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm Lodpfx Astv Ia Toffeta feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t Ljdpfx Ajcxxq Djffjta dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: good (used), Mikron C axis machine table - with Heidenhain control 430 - Siemensservermotor - table: 60 x 110 cm - 4th axis, diameter: 50 cm - weight: 650 kg Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Ltodpjic Rviefx Affoa Shipping with forwarding agent.

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min Ltedpfx Ajcxxpqeffoa total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: used, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 355 turning speed range 40 - 4000 U/min number of speeds 21 Lsdpexv D U Isfx Affjta tool taper ISO 40 quill stroke 90 mm feed speeds 2-3000 mm/min rapid traverse longitudinal and cross 6000 m/min rapid traverse Z-axis 5000 m/min distance spindle nose and table 450 mm table travel 495 mm table surface area vertikal 300 x 450 mm fixed clamping table 460 x 800 mm max. loading 350 kp dimensions ca. 3150 x 1800 x 2125 mm weight - pallet system ca. 2380 kg weight of the machine ca. 2,4 t incl. variois tool holders SK 40 manual included

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Display Heidenhain TNC 114 and Infinitely Variable Feed Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm Ltedpfx Aexu Hkcsffja >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40, extendable >> Weight: approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control system TNC 114, which means it can travel a programmed distance in any one axis (X, Y, or Z) and stop automatically upon reaching the set value. Up to 4 different zero points can be set, and dimensions can be entered as either absolute values or incremental (chain) dimensions. The feed is infinitely variable from 0 to 750 mm and can be adjusted during machining. Rapid traverse can be activated at the push of a button. Spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only when the machine is at standstill. The vertical milling head is mounted with three bolts, allowing for removal or reattachment in just 2 minutes; it is manually fixed using the articulated arm on the left of the machine and simply swung aside. A particular feature of this machine is its large travel distances relative to its size: Z = 380 mm, X = 500 mm, and Y = 500 mm. Additionally, the machine has electronic overload protection for the vertical spindle. Mechanically and electrically tested. You are welcome to view and test the machine under power at our facility.

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Ltedpfx Afjq Hdwuefoa Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Ltsdpfsqttt Tjx Affsa

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. Lodpfxswnq Sgs Affjta No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested Ltodefbma Nepfx Affja -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Ltodpfxjwiucfj Affoa Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Ltedpfxeum Rpyj Affea Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Ltedpfx Aeg Nw Rzoffea

Condition: good (used), Year of construction: 2004, functionality: fully functional, * CNC-control Heidenhain iTNC 530 * Number of Controlled Axes: 5 + spindle * NC-swivel-type rotary table, diameter 800 mm - Workpiece weight in clamped horizontal position 1000 kg - Positioning mode for both axes 600 kg (upper 30 deg. 500 kg) - 4-5 axes simultaneous mode 400 kg - Swivel range 45 deg. to the work spindle, 25 deg. away from the work spindle * 60-Position Tool Changer * Direct Measuring System, Resolution 0.001 mm * Coolant System (no coolant through spindle) * Chip Conveyor Technical details x-travel 800 mm y-travel 1000 mm z-travel 655 mm tool taper ISO 40 spindle turning speed range 0 - 15000 rpm feed range 10000 mm/min Ltjdpfjx Nn U Iex Affja rapid traverse 30 m/min power capacity (100/40% ED) 18/24 kW total power requirement 40 kW weight of the machine ca. 10,5 t

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Ltedpfx Aox I Nrfoffoa

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Ltodpstt Acgjfx Affoa Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options...

Condition: good (used), Year of construction: 1999, operating hours: 12,506 h, functionality: fully functional, X Y Z 710 500 500 Heidenhain 426-430 IKZ Ltedpfxjx Nur Hj Affja

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. Application Types Ljdpfx Afsx Imtyjfota Milling

Condition: good (used), Year of construction: 1999, functionality: fully functional, Technical details x-travel 1350 mm y-travel 900 mm z-travel 750 mm power capacity - milling spindle 22 kW Lsdjx Nn T Dspfx Affjta table surface area 1400 x 840 mm spindle turning speed range 12000 rpm tool taper ISO 40 feed range 0 - 10000 mm/min rapid traverse 30 m/min total power requirement 46 kW weight of the machine ca. 10,1 t CNC-control Heidenhain TNC 426 M 46-station ATC Coolant system Coolant through spindle Chip conveyor Direct measuring system with 0.001 mm resolution Electronic handwheel

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Ltodpjxnprvsfx Affsa Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? Ltodpfx Afowx Naqjfea For further information or contact options, please visit our website.