Used Mikron Ums 600 for sale (179)

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Njdpfxjruauqs Af Eodc Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 Njdpfewm I N Hex Af Esdc T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: used, Year of construction: 1995, Technical details: Nedpsw D Hhpefx Af Ejdc x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, table load: 800 kg, overall weight: 5,300 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 8,500 h, spindle motor power: 12 W, spindle nose: ISO B40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Video available on request. Ndodpfx Afowxrgtj Eoc Delivery and installation by us possible.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Nsdpferb E Hmjx Af Eedc -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Njdpfsxnprvox Af Ejdc Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Traverse paths X/Y/Z:400/240/350 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Nsdpfx Ajxgpwcof Eedc Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, CNC control Heidenhain iTNC530 NC swivel-rotary table (B-axis and C-axis) pallet changing device with 7 places 300mm x 300mm 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 450 mm Verfahrweg Z / Z-Travel 450 mm B-Achse Schwenktisch / B-axis swivel table -115 / +30 ° C-Achse Rundtisch / C-axis rotary table 360 ° Tischgröße / table size 300 x 300 mm Werkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 20-20000 UpM /rpm Werkzeugwechsler / tool changer 30 fach /fold Gewicht der Maschine ca. / weight ca. 7700 kg Ndsdpfx Afjvmqkuo Eec Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Ndsdpfeuxrv Hsx Af Esc Technical data shown on pictures.

Condition: ready for operation (used), Year of construction: 2008, Movement X-Axis Movement 600 Y-Axis Movement 450 Z-Axis Movement 450 This 5-axis MIKRON UCP 600 Vario was manufactured in 2008, featuring a Heidenhain control, 600 mm X-axis, 450 mm Y-axis, and 450 mm Z-axis travel. It boasts a 20,000 rpm spindle speed, HSK-A 63 spindle nose, and a 75-slot tool magazine. Additional features include a BLUM tool measurement system and a 600L coolant tank with belt filter. Consider the opportunity to buy this MIKRON UCP 600 Vario vertical machining centre. Contact us for more information about this machine. Njdoxc Rb Uepfx Af Ejdc Application Types Milling

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg Ndedpjrb E Hbjfx Af Eec

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: Nedpfx Afst Hr Ahs Eodc - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Ndjdpfx Ajw Hxzmsf Ejc

Condition: ready for operation (used), Year of construction: 2019, X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Ndjdpfov Hndfox Af Ejc

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Nedpfxor Urm Ss Af Eedc Parts shown by hand not come.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, For sale a machining center of the Mikron brand and type UMS 710-900 The machine is in good condition New ball screw X and Y, new cover Z and new spiral in Z Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: TNC 355 HEIDENHAIN Table size: 1200 x 600 mm max. table load: 500 kg Spindle holder: SK 40 ring groove spindle speed: 5 - 5000 rpm drive power - milling spindle: 11 kW Feed range: 0 - 10000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total power requirement: 15 kW Machine weight approx.: 5.0 t Space requirement approx.: 2.40 x 3.40 x 2.30 m Chip tray Nodpfx Astt Acgsf Eodc no IKZ 44-position tool changer handwheel Initial filling with operating materials from machines possible on request On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Nodpfx Ajrb E Hfof Ejdc -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Njdpfx Afsgydn Ie Ejdc Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: ready for operation (used), Year of construction: 1997, Control Unit Brand HEIDENHAIN Model TNC 410/426 Tools Max weight 12 kg Max tool diameter 200 mm Type of tool holder SK 40 / DIN 69871 Additional Equipment Nodowqh Tmjpfx Af Ejdc Noise Emission: Sound power level of 75 dB (A) This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Nsdpfow Exr Aex Af Esdc

Condition: good (used), Year of construction: 2007, Machine is in good condition, Njdpfx Afewk Nm Ij Ejdc Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min Ndjdpfswx Naqsx Af Eec No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 Nodporb E Hqsfx Af Eedc -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: good (used), Year of construction: 2007, Technical data of machine shown on photos. Parts shown by hand not come. Ndjdsu Av Ubjpfx Af Eoc New spindle 05.2019.

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm Nsderc Ilgopfx Af Ejdc -Weight: 0.4 kg