Machining centre

MIKRON WF31C Cnc

Condition: used, Technical details: turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies Tsdpex Ngzyefx Amrjc *

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t Tedpfx Amstqqpljroc dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Todpfx Ameylhmusrsc Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: ready for operation (used), Effective width: 1500mm, screw diameter: 2x 500mm, motor power: 2x 3.5kW, outlet: 2x 800x800mm, length: 7000mm, conveying speed: 50m/min, with steel construction underframe, closed constructional design with bunker walking elevation, an inspection is possible, year of construction unknown, was overhauled in 2022. Tsdpfxon Tpm Ao Amrjc

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared Tedpfjyk Tbhsx Amroc

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Tedpfx Asu Nyxwomroc Coevorden, Netherlands

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device Tsdpfx Asfbma Nomrec -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - Multi-edge device Tsdpfx Amov Raaterjc - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, controller manufacturer: FANUC, controller model: Series 16i-MB, number of axes: 4, This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Machine in good condition, regularly maintained. Technical Machine Benefits Tsdpfxsx D Rxio Amrsc • 4th axis: yukiwa • Table size: 750 x 380 mm • Spindle power 11 kW (1min rating) / 3.7 kW (continous) Extra Information Machine still under power

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Tjdpfjw Hgltex Amrec