Used Mikron Wf 51 D for sale (181)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Bsdpfet Hw D Rjx Adrjli Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Bsdszf Ncispfx Adrsli

Condition: good (used), Year of construction: 2014, Universal Machining Center Machine type: Mikron HPM 1350 U Control system: Heidenhain iTNC 530 Year of manufacture: 2014 TECHNICAL DATA: Travel ranges: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 700 / 895 mm B-axis: +16°/-120° A-axis: 360° Swiveling head Number of controlled axes: 5 Spindle speed range: 15,000 rpm Drive power: 38 kW Tool interface: HSK 63 Tool changer Number of tool positions: 48 NC rotary table Table size: Ø 1,100 mm Equipment features: Chip conveyor Internal cooling (IKZ): bar Air through spindle center Oil mist extraction Tool measurement Measuring probe Blodpfozarxqjx Adroi

Condition: excellent (used), Year of construction: 2006, X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 895 mm A-axis: +16 to -120 degrees Rotary table: Diameter 1,100 x 1,000 mm Max. workpiece size: 1,000 x 1,000 x 500 mm Max. table load: 1,600 kg Tool interface: HSK-A63 Tool changer: 46 positions Spindle speed: 24,000 rpm Control system: Heidenhain ITNC 530 Space requirement (including door clearance): 5,605 x 4,290 x 3,159 mm Weight: 12,500 kg Bjdpszclk Sefx Adroli Includes coolant system, 40 bar Includes documentation

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 910 x 500 mm Spindle taper SK40 Bljdpoq Dlciefx Adrei Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: Serien-Nr.: 107.84.00.188,, CNC machining center, manufacturer: Mikron, type: HSM 400, year of manufacture: 2005 Serial number: 107.84.00.188, travel ranges (x/y/z-axis): 400x450x350 mm, tool holder: HKS40E, max. spindle speed: 30,000 rpm, spindle drive: 13 kW, recorded operating/load hours: 44,899/32,369 (13,350 spindle hours since replacement) CNC control system: HEIDENHAIN iTNC530 Pallet table PPC 320x320 mm, 7-position pallet changer, 68-position tool changer, 1 Cooling unit BURN, 1 extraction system KELLER L-Cut, year of manufacture: 2012, Setup probe PS 32 (WITHOUT any further accessories) Blsdpfxezdtaco Adrji

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Blodpfxem Dtnrs Adrei Pallete changer EROWA not come.

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 1000 x 560 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Coolant through spindle 3D measuring tracer Tool lenght measuring device Misc. accessories Bsdpfx Adjzbrrtjroli MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Bljdpfx Adjzbqy Njrei Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, load capacity: 340 kg, mount diameter: 200 mm, rapid traverse Z-axis: 1 m/min, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, spindle speed (max.): 7,500 rpm, spindle speed (min.): 10 rpm, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Manufacturer: Mikron Bledpfjp Sq Trox Adrji Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Condition: used, Year of construction: 1991, functionality: fully functional, Mikron A35, complete with accessories, in perfect working order. Blodpfx Adozcvxyjrji

Condition: used, Year of construction: 2008, • Commissioned: 2008 • Travel ranges X600 / Y450 / Z450 • Heidenhain iTNC 530 control system • Electric handwheel • Step-Tec HSK A63 spindle with 20,000 rpm • Internal cooling, 70 bar Blodpfx Ajzampqedroi • 120-position tool magazine (ATC) • 7-position pallet changer, 3R 280 x 280 Dynafix • Blum laser tool measurement system • 3D probing system, M&H • Minimum quantity lubrication system • Band filter system, 600 liters • Chip conveyor • Visiport The machine will be available in October 2026.

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the renowned Swiss manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and stands out for its hallmark Mikron precision and generous working area (up to 900 mm travel in the X-axis). It is ideally suited for toolmaking, prototyping, training purposes, or demanding repair workshops. Technical specifications at a glance (manufacturer data): Working range & axes: Longitudinal travel (X-axis): 710 / 900 mm Cross travel (Y-axis): 630 mm Blodpfszcqcgsx Adroi Vertical travel (Z-axis): 500 mm Work spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed ​​range: variable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (angle table): Clamping surface: 600 x 1,200 mm T-slots: 9 (14-H7, 63 mm spacing) Max. table load: 500 kg Electrics, dimensions & weights: Connected load: Total installed nominal power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (incl. protective enclosure) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1997, x-travel:710 mm y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup. Bsdpfxslu N His Adreli

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Table length [mm]: 1150 - Table width [mm]: 750 - Tool holder: ISO40 Bjdpfx Adey Uwawsrjli - Max. spindle speed [rpm]: 12000 - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 090200220, Equipment: documentation/manual, For sale due to business closure - URGENT Very fine, rare, high-quality machine in working condition. Gear cutting machine for high-precision machining, providing great accuracy and reliability. It allows for the cutting of straight and helical gears. Straight-toothed gears with a diameter of 0 to 120 mm Straight-toothed gears with a diameter of 120 to 200 mm See the technical sheet photo. Documentation accompanying the machine: Original operating manual: 150 pages Mikron representative training course (February 25 - March 1, 1963) Technical data sheet available upon request, as well as a list of available cutters: Mikron (12), L. Carpano (23), K. Schnyder-ks (27), Piltz (4) (PDF). Blodey Iqkpopfx Adrji H: 1.515 m L: 0.97 m W: 0.526 m Three-phase Machine weight: 680 kg To be picked up; removal is the responsibility of the buyer.

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manually 350 mm) Maximum tool weight: 6 kg Bledpfx Aozara Ujdrsi MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm Bsdeyyqtuopfx Adroli z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg Bledpfx Adey Rxqvjrei

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Blsdpfxsviq U Ej Adrji Operating instructions

Condition: used, Year of construction: 1998, x-travel 710 mm Bljdpfxotz Sqhs Adrsi y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 7,500 rpm, MIKRON VCE 750 VERTICAL MACHINING CENTER TRAVELS 760x500x400 mm SPINDLE ISO 40 AT 7,500 RPM 20-POSITION TOOL CHANGER PROGRAMMABLE WORKPIECE COOLING NOZZLE USER AND MAINTENANCE MANUALS AUGER FOR CHIP REMOVAL COOLANT TANK Bljdpfx Ajy Nx E Dedrji

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER Bedpjy Twa Ujfx Adroli ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC Blsdpfx Asy Tv Nbjdrji MACHINE WEIGHT: 19,000 KG

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, rotational speed (max.): 42,000 rpm, spindle speed (max.): 42,000 rpm, spindle motor power: 12,000 W, Equipment: documentation/manual, MIKRON HSM 400 HIGH-SPEED VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2005 MINERALIT ANTI-VIBRATION PORTAL STRUCTURE POSSIBILITY OF AUTOMATION EQUIPPED WITH HEIDENHAIN TNC 530 TRAVEL: X 400 Y 450 Z 350 MM Blodpfx Asy Tvzqjdrei ELECTRONIC HANDWHEEL ELECTRIC SPINDLE HEAD AT 42,000 RPM, 12 KW, HSK-E40 TABLE EQUIPPED WITH EROWA UPC 320 RECEIVER 36-TOOL CHANGER HEAD COOLING SYSTEM MACHINE WEIGHT 8000 KG