I/R module Simodrive 611

Siemens Mikron 6SN1145-1BA00-0BA0 UME 600

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Nsdpfx Absilhfco Aodc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm Njdpfx Aewpcfuob Aedc -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate Ndsdpfx Aepdr Aisb Aoc 660x560 Mould height min 200 mm

Condition: excellent (used), Motor-driven rotary shift table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Nedpfoif Rlbox Ab Aedc Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: excellent (used), Year of construction: 1988, Krauss Maffei Ndodpfxofp U Hve Ab Asc KM 250-900B Closing force: 250 tons Year of manufacture: 1987 Injection weight: 470 g Tie bar spacing: 63 x 56

Condition: good (used), Year of construction: 2014, Cutting range examples: Nsdpfszrmk Rjx Ab Asdc at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. with the option of hydraulic lifting of the saw frame.

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW Nedpfxjvmmrue Ab Aedc - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: used, Year of construction: 2000, functionality: not functional, Hurco VMX 50 machining center with Ultimax control IKZ chip conveyor Njdot H I Ugepfx Ab Asdc

Condition: excellent (used), Year of construction: 1999, Angel ES 650/175 HL-V Closing 175 tons Year 1999 Nedpfepdrzhsx Ab Ajdc Scrow 45mm Stroke volume 318 cm3 Enlarged clamping plate 820x750 Mould height min 250 mm

Condition: good (used), Year of construction: 1988, CNC universal console milling machine, manufacturer: KLOPP, type: FWS15, year of manufacture: 1988. CNC path control system: Heidenhain TNC 155. Travel ranges: X 1170 mm, Y: 420 mm, Z: 420 mm Work table: 1500 x 400 mm Spindle connection: SK50 Spindle power: 15 kW Spindle speeds: 35-3550 rpm Support for horizontal milling, Coolant system, chip tray, Various tool holders, Complete machine documentation. Machine ready for immediate use. Workshop inspected. New parameters and batteries installed on August 20, 2020. Good overall condition. Nsdpfx Aebu Em Asb Asdc Machine can be demonstrated under power.