Used Micrometer for sale (137)

Condition: used, Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 275-300 mm -One revolution of the drum corresponds to: 0.5 mm -with locking device -Measuring force: ratchet Dwedsb A R H Dspfx Aduoc -Setting mass -Hand protection -Key -Number: other sizes available -Weight: 1.5 kg

Condition: ready for operation (used), machine/vehicle number: 1705713, Condition Used Dsdowf S U Dspfx Aduowc Stock Number 8A This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case. Mitutoyo Micrometer The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: good (used), Keyence HIGH-ACCURACY CCD MICROMETER LS-7001 + LS-7030T / LS-7030R. Dedpfx Ajib Icneduswc

Condition: used, Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm Dwjdpfx Adsfn Am Ueujc -Total weight: 0.8 kg

Condition: excellent (used), Micrometer caliper Micrometer Brand Mitutoyo (28637) 1 x 25 - 50 mm 2 x 50 - 75 mm 1 x 75 - 100 mm 1 x 125 - 150 mm Dedpfx Adewn E Snoujwc 1 x 175 - 200 mm 1 x 200 - 225 mm 1 x 225 - 250 mm 1 x 350 - 375 mm

Condition: used, Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces Dwsdjdk Uwdjpfx Adusc -Measuring range: 0-225 mm -Other sizes: also available -Weight: 7.7 kg

Condition: used, Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 25-200 mm Dedpsb A Sx Usfx Aduowc -One revolution of the drum corresponds to: 0.5 mm -with locking device -large measuring areas -Measuring force: ratchet -Including case -Setting mass -Hand protection -Key -also other sizes available -Weight: 5 kg

Condition: new, The Turnado 230/1000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern lathe combines a heavily ribbed machine bed and a powerful main motor with an array of standard equipment including a 3-jaw chuck and a user-friendly control panel, making it perfect for both novice and experienced operators. The rigid headstock and high-quality spindle support ensure consistent precision and performance, even under heavy loads. With features like adjustable feed stops and a micrometer longitudinal stop, it simplifies complex machining tasks. Notably, this lathe includes advanced safety features, ensuring operator safety while maintaining a clean workspace. With the Turnado 230/1000, you can confidently handle intricate projects and request a quote today to equip your workshop with this reliable engine lathe. Dwodeuy Ic Eepfx Adujc

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Dedpfswgz H Eox Aduswc Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Djdpjxl Ta Sjfx Adujwc Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Year of construction: 1987, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this final product range thanks to its two contrarotating pin discs, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with pins impacts and projects the particles against the different pin rows reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding disc, the type of pins, air volume, feeding rate, etc. Technical details Cryogenic grinding machine (LN2) Construction material: stainless steel Non Pressure Shock Resistant (NPSR) Scope of supply Hosokawa Alpine 250 CW Contraplex pin mill with pin discs and motors A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Djdpjrvh Hkofx Aduowc Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: refurbished (used), Year of construction: 2025, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: Dwsdjfig I Nepfx Adusc • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: excellent (used), Inside micrometer Dwodpewykicofx Adujc tManufacturer: Mitutoyo Type: 511-176.05 (28651) Measuring range: 160 - 250 mm

Condition: new, The Turnado 280/1500 PRO is a state-of-the-art Conventional Horizontal Lathe from KNUTH, designed for robust and precise machining in the Engine Lathes category. This model embodies over 20 years of excellence, integrating modern advancements into the classic lathe framework. It features a new ergonomic design that enhances user operation and comfort, while the powerful main spindle drive ensures high torque across an extensive speed range. Significantly, the Turnado lathe maintains constant cutting speeds during face turning, adapting to the workpiece diameter for optimal results comparable to CNC machines. Its solid base, consisting of a heavily ribbed bed and rigid headstock, promotes durability and reliability. With features like a central lubrication system for maintenance ease, a micrometer bed stop for repeatability, and a suite of standard equipment, including quick tool change systems and a 3-axis position indicator, this lathe stands out in both performance and efficiency. To experience the benefits of the Turnado 280/1500 PRO for your machining needs in the Engine Lathes category, request a quote today. Dwjdpsuyinvofx Adusc

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction Dwodpom Rlb Nsfx Aduec safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features Dwjdoxl Taropfx Adusc • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Dwsdpfjqgpb Esx Adujc Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity Dwodpfxovnrius Adusc

Condition: excellent (used), Micrometer make Hommel Precision Dsdpfxott Nugj Adujwc Measuring range 175 - 200 mm diameter (2852) Test gauge in wooden storage case

Condition: new, The V-Turn 410/1500, part of the Conventional Horizontal Lathes category and under the Engine Lathes group, is a precision lathe designed for both precision machining and robust production tasks. This bestselling model from KNUTH features an inverter and a powerful 5.5 kW motor, offering spindle speeds up to 3,000 1/min, making it highly effective for processing workpieces with small diameters while maintaining exceptional quality. The constant cutting speed function during face turning automatically adjusts spindle speed based on the diameter, ensuring turning results that rival those of CNC machines. Built with a heavy ribbed machine bed and a solid cast-iron frame, the V-Turn 410/1500 provides stability and strength for heavier machining applications. Additional features include a micrometer stop, turret stop, and integrated central lubrication for low maintenance. With extensive standard equipment, this machine is ready for various turning operations. To enhance your productivity with a top-notch Engine Lathe, order online today or request a quote. Dwedpfx Adeuxddcjuec

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev Dodpfoxl Dwujx Aduewc - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Djdpfx Aogt E Ilsdujwc Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: excellent (used), Frame Micrometer Brand: Mitutoyo Measuring range: 400–425 mm Mitutoyo 103-153 OM 425 with calibration gauge Stock number (28669) with original wooden case Dwsdoxdwczopfx Aduoc 685 x 400 x 45 mm

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display Djdegd Iagopfx Aduswc • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Dedpfx Adsir If Djujwc Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list