Used Micro Wizard for sale (857)

Condition: excellent (used), functionality: fully functional, overall weight: 1,200 kg, type of input current: three-phase, power: 11 kW (14.96 HP), rotational speed (min.): 6,500 rpm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, CLARIFIER FOR JUICES , WINES , OILS 11KW , UPT TO10 MC/H Crjdjzv I Acjpfx Aiisi IMMA MICRO 5,5 KW , 2MC/H =6500 EURO

Year of construction: 2019, condition: like new (used), Operates using the Coriolis effect. Designed to directly measure mass flow, fluid density and temperature and to calculate volumetric flow and concentration. Serial number 14867499. Manufactured in stainless steel, with a twin curved tube configuration, electrical connection via a terminal box and flanged process connections. Flow calibration factor 703.174.29. Constants K1 10696.58, DT 4.42, K2 12680.02 and FD 227.8822. Designed for group 1 fluids, with an allowable temperature range from minus 196 to 204 degrees Celsius, maximum pressure of 40 bar at 25 degrees Celsius and allowable pressure of 34 bar at 204 degrees Celsius. CE marked. Csdpfx Aioz R A S Heisri

Condition: excellent (used), Year of construction: 2021, operating hours: 260 h, functionality: fully functional, machine/vehicle number: 1028586, overall weight: 55 kg, load capacity: 10 kg, arm reach: 1,100 mm, input voltage: 230 V, input current: 16 A, type of input current: AC, KUKA KR 10 R1100-2 Industrial Robot – 2021 – 260 Operating Hours KUKA KR 10 R1100-2, 6-axis industrial robot, manufactured in 2021, with a total of 260 operating hours. The robot was previously used in the audiovisual and film production industry, primarily for robotic camera applications on film sets. It is equipped with a KUKA KRC5 controller, KUKA smartPAD teach pendant, and the following KUKA software packages: KUKA.ready2_animate, KUKA.RobotSensorInterface (RSI), and KUKA.GripperSpotTech 5.0, installed on the controller. Technical Specifications * Manufacturer: KUKA * Model: KR 10 R1100-2 * Year of manufacture: 2021 * Number of axes: 6 * Rated payload: 10 kg * Maximum reach: 1,101 mm * Pose repeatability: ± 0.02 mm (ISO 9283) * Robot weight: 55 kg * Controller: KUKA KRC5 * Teach pendant: KUKA smartPAD * Total operating hours: 260 hours Installed Software KUKA.ready2_animate Software for programming and executing complex robotic movements, with support for animation and motion control applications. KUKA.RobotSensorInterface (RSI) Interface for real-time communication with external sensors and systems, allowing dynamic trajectory adjustments based on incoming data. KUKA.GripperSpotTech 5.0 Technology package for gripper control and monitoring, including configuration and programming of gripper functions. Applications The robot was used in the audiovisual and film production industry for robotic camera operations. Suitable for: * Robotic camera systems for film and advertising production. * Motion control and robotic animation. * Precise and repeatable programmed movements. Crsdpfx Aie Ahgr Esioi * Synchronisation of robotic movements with audiovisual sequences. * Handling and positioning. * Gripper-based applications. * Industrial automation. General Condition The robot is in excellent overall condition, with a total of 260 operating hours. No collisions, impacts or particular incidents have occurred. A few superficial marks may be visible on the paintwork. These are due to the application and removal of gaffer tape used during film shoots for audiovisual production purposes. These marks are purely cosmetic and do not affect the mechanical integrity or operation of the robot. Included Equipment * KUKA KR 10 R1100-2 industrial robot. * KUKA KRC5 controller. * KUKA smartPAD teach pendant. * Connection cables. * KUKA.ready2_animate software. * KUKA.RobotSensorInterface (RSI) software. * KUKA.GripperSpotTech 5.0 software installed on the KUKA KRC5 controller. Inspection and Transportation The robot can be inspected and demonstrated in operation by appointment in Paris. Collection on site. Delivery can also be arranged, with terms and conditions to be agreed with the buyer.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. Crodpert Tpnefx Aiiei - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...

Year of construction: 2012, condition: used, An egg breaking machine is offered. Processing capacity: 900-9000 eggs/hour. Controls: control panel with start/stop buttons, speed controller and display. Equipped with a two-row egg breaking system, roller feeder and mobile base frame. Inspection possible by arrangement. Crodpfxo Ahq Nns Aiisi

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Cedpfey Ipbmex Aiisri Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2161, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, input current: 12 A, operating pressure: 10 bar, Equipment: documentation/manual, The machine has seen little use and is in very good condition. It is a 6-station inline machine that tests the entire can. Therefore, it is suitable for 3-piece cans. Crodpfe Abaurox Aiiji Aerosol can format sets: 35mm, 45mm, 50mm, 53mm diameter. Documentation and instructions from Bonfiglioli are available. I also still have some spare parts and various valves. However, I am open to price offers.

Condition: ready for operation (used), Tesa Micro-Hite 3D Measuring Device, Coordinate Measuring Machine Travel range: X-axis: 460 mm Y-axis: 510 mm Z-axis: 420 mm Dimensions (machine) Footprint approx.: 1,060 × 870 mm Height: approx. 1,320 mm Load & Weight Max. part weight: 227 kg Net weight machine: approx. 210 kg Accuracy MPE_E (Length measuring deviation): 3+4L/1000 µm (L in mm) Crsdpe Ah Dwasfx Aiiei MPE_P (Repeatability): 3 µm Accessories: Probe Measuring prisms Tesa USB stick Technical description has been adopted. You are welcome to visit us for an inspection. We can gladly arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Crodpsx I Ehpefx Aiioi Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids. Csdpez Ehm Rjfx Aiiori

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. Credpfjzy H U Ssx Aiiei In addition, there are a number of accessories included. You can see these in the images below. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Cjdpfx Ajz H Ah Soiijri

Condition: new, Micro Motion flow sensor 1700R11AEMEZZZ Cjdpj Afdvuefx Aiisri

Condition: used, Year of construction: 2004, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Crsdpfx Ajz Iuapeiiji

Condition: used, ILD1800-100(243), optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System Crodpfoq S Snkjx Aiiji Model: ILD1800-100(243) Condition: Used

Condition: excellent (used), Year of construction: 2020, TESA Micro-Hite 600+M – Motorized Digital Height Gauge For sale: a professional TESA Micro-Hite 600+M digital height gauge, manufactured by the Swiss company TESA Technology, designed for precise dimensional measurements in metrology laboratories, quality control departments, and industrial plants. The device is equipped with an electronic control panel with a color display, a motorized measurement system, and a precise measuring probe. Technical specifications: * Manufacturer: TESA Technology – Switzerland * Model: Micro-Hite 600+M * Catalog number: 00730080 * Serial number: 1K2320 02 * Measurement range: 600 mm * Device type: digital height gauge * Drive: motorized * Reading system: digital * Measurement units: mm / inches * Control panel: color LCD display with keyboard * Factory calibration date visible on the plate: 17.12.2020 * Calibration certificate: no. 1K 3056 007 32 * Marking: CE Functions and measurement capabilities: * Precise measurement of component heights * Measurement of hole and shaft diameters * Measurement of distances between surfaces * Determination of center points * Differential and comparative measurements * Automatic movement of the measuring head * Storage of measurement results * Support for serial measurements * Measurement in metric and imperial units Equipment visible in the photos: Csdpsz Si Sqofx Aiisri * TESA Micro-Hite 600+M height gauge * Electronic control panel * Measuring probe * Granite measuring plate * Steel frame for the granite plate * Additional accessories and fixing elements visible in the photos

Condition: used, functionality: fully functional, FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Crodpfjw Iy Nyox Aiioi Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: used, Year of construction: 2011, Micro 8 automatic lathes and LNS Tryton bar feeders. Crodpfx Aszz Nl Nsiiei

Condition: used, Milling head FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Dust extraction nozzle diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Dust extraction nozzle diameter from chipper: 80 mm Working width of the table: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Length of glued board: 200 - 600 mm Cjdpsy Ud Uuefx Aiisri Table drive: electromechanical Feed rate: 3 - 30 m/min, steplessly controlled Glue applicator: special glue unit with comb Loading of glued boards: manual, onto a loading belt system Remaining operations: automatic Press FC-10PZ6/2: Width of glued board: 25 - 120 mm Thickness of glued board: 20 - 50 mm Length of finished board: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic unit: up to 100 bar Unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set performance, depending on the material used: up to 4 cycles/min (up to 4 six-meter strips/min) Dimensions: Length: 13600 mm Width: 3800 mm Height: 1850 mm

Condition: used, Mobile micro cutter Inotec -Type: I175CD-90RW -Power: 115 kW Crodj Afwtlopfx Aiiji -Year of manufacture: 2017 -Knives and sieves included -Cutting set diameter: 175 mm -Power supply: 400 V 3Ph 50 Hz -Dimensions: 1750 x 1150 x 1580 mm -With control cabinet -Cabinet dimensions: 2070 x 750 x 2000 mm -Condition: used in very good condition

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Cedpeyc Sfpefx Aiisri Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Year of construction: 2015, condition: used, Micro-finishing machine Manufacturer: THIELENHAUS Type: CenterStar 143 Year of manufacture: 2015 Control system: Siemens Csdjzi E D Dopfx Aiiori Technical data: - Number of workstations: 4 - CAB units: 2 - Center height of rotary indexing table: 1396 mm - Tailstocks: 4 - Workpiece spindle speed (3x): 3000 rpm - CAB unit speed (2x): 6000 rpm - Rotary table speed (1x): 1435 rpm - Workpiece spindle drive: 9 Nm - CAB unit: 6 Nm - Rotary table: 0.75 kW The machine was used for cam machining. Comprehensive operating manual included. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Codpfx Ajy Ub E Deiisri Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: excellent (used), Year of construction: 2017, Stephan micro cut model MCH20FS with a ceia metal detector Credpfxoufylae Aiiei

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Credpfx Aexvniisiisi For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.