Used Mfh 2200 for sale (2,532)

Condition: new, Year of construction: 2023, functionality: fully functional, color: black, All kinds of new and used generators available. From 7.5 kVA to 2200 kVA and larger. Prices and availability/delivery time on request. Some machines are available directly from stock and in addition, non-stocked ones can be produced on order for you. Options: - single and double bearing - Different SAE/ construction sizes - Single bearing variants: different flanges Ledpfxjq Uk Sbe Ab Usah - Single bearing variants: different couplings - 1 phase/ 3 phase - Different designs - 2/ 4 poles (6 poles on request) - Standard IP23 (higher on request) Prime power (kVA) specified at 50Hz 400V - Available models (other versions can be offered on request) 8.1 kVA, 11 kVA, 13.5 kVA, 16 kVA 12.5 kVA, 15 kVA, 17.5 kVA, 25 kVA 18.8 kVA, 22.5 kVA, 25 kVA, 27.5 kVA, 32 kVA, 37.5 kVA, 42.5 kVA 30 kVA, 35 kVA, 37.5 kVA, 40 kVA 45 kVA, 50 kVA, 60 kVA, 75 kVA, 80 kVA, 85 kVA, 90 kVA 100 kVA, 113 kVA, 125 kVA, 140 kVA, 150 kVA, 163 kVA, 180 kVA, 188 kVA, 200 kVA, 230 kVA, 250 kVA 250 kvA, 300 kVA, 313 kVA, 325 kvA, 350 kVA, 380 kvA, 400 kVA 500 kvA, 550 kVA, 563 kVA, 610 kVA, 625 kVA, 670 kVA 750 kVA, 800 kVA, 915 kVA, 1020 kVA, 1138 kVA, 1250 kVA 1280 kVA, 1420 kVA, 1560 kVA, 1680 kVA, 1905 kVA, 2100 kVA, 2205 kVA For generators >2205 kVA we also offer many options, please inquire without any obligation. Besides delivery of generators we offer many additional service options. Think of: - Engineering - Removal and installation of generators - Generator expansion with your desired specs such as a CosPhi controller, heating, PM etc. - Generator parts supply and wide range in stock such as generation fields, voltage regulators (generator AVR's), bearings, rectifiers / diode kits - On-site bearing exchange of your existing generator - Inspection, periodic maintenance, repair, overhaul and rewinding of generators. We can supply generators for all kinds of applications, both new construction and replacement of your existing generator. Besides 400V generators we also supply medium voltage generators and generator - transformer combinations with which all (common) voltages can be achieved. Think of 1kV, 3 kV, 5 kV, 6, 6.3 and 6.6 kV, 7kV, 10 kV, 11 and 11.5 kV, 12 kV, 13 kV, 15 and 15.6 kV, 20 kV, 23 kV, 25 kV, 26 kV solutions. Controllable or non-controllable. Generators for rental generators, generators for emergency power applications, generators for marine purpose and specials with different voltages or special applications. Please contact us for the possibilities. We continuously have used generators in stock.

Condition: new, AXDL240ZGR32-D-2200-2650-E0-XX00-X-B, NTN SNR, parallel axis, L=265cm Ljdsvrgg Nopfx Ab Usah Model: AXDL240ZGR32-D-2200-2650-E0-XX00-X-B Condition: New

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Electric drive: 250 kW Including switch cabinet and hydraulic unit. Laodsuv Htujpfx Ab Uoh

Condition: used, Working size max. approx.: 1,400 x 2,500mm heater: 1,7 kW Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. * Incl. 3 table extensions Lodpolf H Ulefx Ab Uoah * Swivel worktable

Condition: like new (used), Year of construction: 1994, Kallesøe 3 side rotation press New Air pipes Lasdpfouzkbmjx Ab Uoh

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 610, Cutting and printing line for 3-layer cardboard with flexo printers (2-colour printing) - maximum sheet size 950 x 2200 mm (skip - feed 1200 mm) - minimum sheet size 260 x 280 mm Machine dimensions length - 3550 mm Lodjwl Izyopfx Ab Usah width - 3660 mm height - 3500 mm weight 8000 kg power consumption - 8 kW Feeding unit to the device using a strip. The operation is supported by sucking the sheet with an air pump

Condition: excellent (used), Year of construction: 1995, Hyperbaric Chamber Haux Starmed 2200 for Sale The Haux Starmed 2200 is a fully operational hyperbaric chamber designed for oxygen therapy. It features a modern PLC control station (installed in 2016) and a manual control system. The breathing systems include the HAUX-OXYMASTER, which supports 12 breathing points in the main chamber and 2 in the vestibule, with options for breathing oxygen or gas mixtures. Patient safety is ensured with safety valves, a communication system (voice and alarm), and monitoring through cameras and observation windows. Comfort is maximized with HAUX-LUXMASTER LED lighting, a cooling and heating system, and locks for introducing objects during operation. The vestibule allows for the transfer of people and objects during sessions without interrupting the pressure in the main chamber. Technical Specifications: • Serial Number: 9528 • Year of Manufacture: 1995 • Maximum Operating Pressure: 5.5 bar • Standard Operating Pressure: 2.0 bar • Maximum Test Pressure: 8.25 bar • Capacity: 23,100 liters (Main chamber: 19,430 L; Vestibule: 3,800 L) • User Capacity: 12 patients 1 operator in the main chamber; 3 people in the vestibule • Weight: 16,980 kg (fully equipped) Features and Functions: • Control System: • Modern PLC control station (installed in 2016) • Manual control station • Breathing Systems: • HAUX-OXYMASTER system (12 breathing points in the main chamber, 2 in the vestibule) • Breathing oxygen or gas mixtures • Monitoring: • Patient monitoring cameras • Observation and viewing windows • Safety: • Safety valves • Communication system (voice and alarm system) • Comfort: • HAUX-LUXMASTER LED lighting • Cooling and heating system • Locks for introducing objects during operation Lodpfxswh Rcxo Ab Ueah • Vestibule allows for the transfer of people and objects during hyperbaric sessions. Additional Equipment: • 2 high-pressure compressors Bauer V15 (1995): • Flow rate: 440 m³/min • Operating pressure: 230 bar • Oil and water separator Bauer (1996) • Compressed air dryer KKW Riedel PCM17S (1995) • 3 sets of high-pressure cylinders • 1 set of oxygen cylinders Technical Condition: • The hyperbaric chamber system is fully operational. Disassembly and loading can be arranged.

Condition: new, AXC100ZKR38-C-1600-2200-H0, AXC100Z, NTN SNR, compact axis with toothed belt drive Laedjvrhtkspfx Ab Ush Model: AXC100ZKR38-C-1600-2200-H0-0000-0-0 Type: AXC100Z Condition: New

Condition: good (used), ANAYAK VH 2200 CNC Bed Mill (Year 2000) Laedpju T Il Rjfx Ab Ueh Heidenhain 426 Travel X: 2000 mm Travel Y: 920 mm Travel Z: 900 mm Table: 2200 x 700 mm Workpiece weight: 3000 kg Spindle power: 22.5/34 KW Spindle speed: 3000 rpm Feed: 5 m/min Rapid traverse: 15 m/min Weight: 12 tons

Year of construction: 1993, condition: used, - working width (mm): 2200 Lajdsn I Twyopfx Ab Ush - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades Lodpfevphiyex Ab Ueah * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), Year of construction: 2012, COGEIM STL A 2200 / 4TR Mesh wire shotblasting machine for stone Ledpfx Aber Nbyzj Ujah Type: Wire mesh Max. width of workpiece: 2200 mm Max. height of workpiece: 400 mm Max. workpiece weight: kg/m Machine oppening width: mm Nr. Of turbines: 4 Turbine type: 380 Turbine wheel diameter: 380 mm Power of turbine: kW Max. turbine flow: 155 kg/min Transport speed: Cleaner type: airwash Foundation: needed Housing protection: Filter unit: Included - bag type Machine is selling in current condition. Refurbishment is also possible!

Condition: new, Year of construction: 2025, TRV 2200: The Perfect Optimizer for Companies Aiming to Stay Competitive The TRV 2200 is the most produced optimizer with the best quality/price ratio in its category, designed to radically transform the production cycles of companies. Here’s why it’s the ideal choice for those seeking superior performance, reliability, and innovation: Unbeatable Speed: With a speed limited to 300 ml/min, the TRV 2200 provides a rapid and smooth workflow, maintaining consistent efficiency. Maximum Precision: Ideal for cutting finished profiles, it guarantees a level of precision that meets even the most demanding requirements. Modular Design: The modular structure allows for customization that perfectly adapts to the needs of every company, optimizing space and production flows. Multi-accessorized: Equipped with numerous accessories for every need, offering unparalleled versatility. Excellent for Every Sector: Whether it's furniture, construction, or woodworking, TRV 2200 is a guaranteed success. Global Efficiency and Industry-Leading Performance Cut, optimize, and revolutionize your production processes: TRV 2200 is already the preferred choice for companies worldwide, which purchase it in series to enhance their competitiveness. This is thanks to minimal maintenance due to the elimination of dynamic components and passive transmissions, and a robust and reliable structure that ensures long-lasting results. Advanced Software Features: Laodpfx Asv Iqdqsb Ueh Over 100 customized cutting plans: widths, quality, and multiple options to optimize the process. Optimization choices between various modes: Commercial value, Waste, Quantity, Length, and Mixed Optimization. Optimization simulation to predict results before production. Accurate control of processed quantities to continuously monitor efficiency. Internal optimization within the machine body, simplifying the process and recovering valuable space. High-Quality Cutting Unit: Tested conveyor drive system without engaging parts, combined with rubber anti-slip pressure wheels for universal use on various materials. High precision cutting, even with wet and curved boards, thanks to the use of durable materials that ensure constant speed and quality. Sectors Where TRV 2200 Excels: Semi-finished furniture components Parquet Windows and doors Laminated boards, slats, and structures Doors, frames, skirting boards, and construction Don’t miss the opportunity to discover how TRV 2200 can transform your production cycle. Watch the video to see its exceptional performance in action!

Condition: new, AXC100ZKL38-C-1600-2200-H0-00XX-0-A, NTN SNR compact axis Lajdpfovrgnysx Ab Ujh Model: AXC100ZKL38-C-1600-2200-H0-00XX-0-A Type: AXC100Z Condition: New

Year of construction: 1994, condition: ready for operation (used), Jungheinrich AM 2200, built in 1998 Jungheinrich AM 2200, built in 2004 Laodpfxsv Tfkco Ab Uoh

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 - heating: included Laodpfx Aon Hxiieb Ueh - cooling: included

Condition: used, Year of construction: 2011, 2. general description High-pressure vacuum cleaner type HS is used to separate dust for smaller tasks. High-pressure vacuum cleaner type HS must not be used in connection with ATEX zones. Standard finish: powder coating for internal installation Ljdpfxohur Hij Ab Ueah 3rd function Process air is fed in through the dust drawer in the left side and out through the side channel blower. side channel blower. 3.1 Daily maintenance Filter cartridge must be cleaned by 5 - 10 rotations with Roto cleaning after operation or when falling suction capacity (see system watch) incl. Dinse suction burner MRZ 350-4 SAZ

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 2200-600-500 Ljdpfx Absv Rhx Re Usah RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Ledpfx Abopl Su Ue Uoah Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, Bending machine press brake from Prod-Masz with side cutouts for bending from top to bottom. Thanks to him, you can finish your windowsill. In the machine construction there is a space of 6 cm up and down for curved processing. It is a modern sheet metal bending machine that bends sheet metal from three sides. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Lasdpscntm Aefx Ab Ueh Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Transport wheels incl. We are looking forward to your contact!

Condition: used, mileage: 78,850 km, power: 100 kW (135.96 HP), first registration: 03/2000, overall weight: 10,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 5,000 kg, empty load weight: 5,000 kg, driver cabin: day cab, gearing type: automatic, suspension: steel, loading space volume: 4 m³, Year of construction: 1999, operating hours: 12,913 h, Equipment: additional headlights, hydraulics, Working machine: - Aebi - Hochdorf MFH 5000 Lasdpfx Aeqxt Exsb Ush - Iveco diesel engine, 3907ccm; 100kw - to. GG: 10.000kg - 78.850Km; 12.913 operating hours - Roof hatch - Central lubrication - Front brush arm - Hydraulics / water pump removed - Suction / brush removed - Spare parts carrier (drives, brakes and tilts) - Rear tipper - Hydrostat Vmax 45km/h You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: Ledpfx Absvbwrbo Usah -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros Ljdpfoc Nxwhjx Ab Ujah The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days We are looking forward to your contact!

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Lsdpfx Absv Npx No Ujah Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: refurbished (used), Year of construction: 2007, Kuka tested / overhauled KRC2 ED05 KR240-2 2000 ca 6500h of work! working space: 55,0 m3 maximum reach 2.700 mm 2.900 mm 3.100 mm Nominal payload 240 kg Additional load arm/swing arm/carousel 50/100/300 kg Additional load arm + swingarm, max. 100 kg Maximum total load 640 kg Number of axles 6 Floor mounting position Position repeatability* ±0.06 mm Control KR C2 edition2005 Weight (without control), approx. 1,267 kg 1,277 kg 1,285 kg Temperature during operation +10 °C to +55 °C Protection class IP 65 Footprint of robot 1,006 mm x 1,006 mm Connection 7.3 kVA Noise level < 75 dB Axis data range (software) Speed at nominal payload Lsdjpa Nxwepfx Ab Ueah 240 kg Axis 1 (A1) ±185° 86°/s Axis 2 (A2) 0°/-146° 80°/s Axis 3 (A3) +155°/-119° 79°/s Axis 4 (A4) ±350° 100°/s Axis 5 (A5) ±125° 110°/s Axis 6 (A6) ±350° 184°/s