Used Metal Detector Checkweigher for sale (35,521)

Condition: used, functionality: fully functional, Year of construction: 2015, Cutting and rewinding material: - Galvanized, painted steel and aluminium with thickness from 0.3 to 3.0 mm Fjdpfx Adoygrv Aepefw - Max. input sheet width is 1,550 mm - Strip widths from 32 to 1,550 mm - Line speed up to 50 m/min - Decoiler load capacity: 12,000 kg Maximum coil width: 1,550 mm Coil inner diameter: from 480 mm to 620 mm Mandrel expansion: hydraulic Cut-to-length: up to 3,000 mm

Condition: excellent (used), Year of construction: 2025, machine/vehicle number: 0987, functionality: fully functional, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed The machine was bought in 2025 and has been working for about half a year. TECHNICAL DATA Dimensions and weights Length approx. 1400 mm Width/Depth approx. 685 mm Weight 185 kg Electrical data Ffsdpfx Adsythuzopew Drive motor power: 1.1 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 45 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Coolant pump

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Ffedpfx Asgulr Aodpsw Cutting angle: -45° to 60 Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Year of construction: 2025, condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Fedpfx Asha Nz Ujdpofw Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Weight: 185kg

Condition: good (used), Used semi-automatic hydraulic band saw for metal Bianco MOD 330 SA 60° Blade dimensions: 3010x27x0.9mm Cutting angle: up to 60° Two cutting speeds: 35/70 m/min Hydraulic vice Cutting capacity at 0° - round 250mm - square 220x220mm - rectangle 320x220mm Fodpfx Aexpi E Sedpsfw Machine weight: 425kg Year of manufacture: 2006

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Fsdewu Tz Rspfx Adpsfw Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Machine weight: 605 kg

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Fedpfx Aowaauujdpjfw Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers Fjdpfxjytfyuo Adpjfw number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Ffodpfx Aoytftujdpsw Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t Fjdpfx Adoytfthjpjfw

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Price: On request Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 Fedpfxjxwnbuo Adpsfw - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: Ffodpfew Dp Eksx Adpow * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Ffsdpfx Adjrkl Unspow Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Ffsdpfxerklxvj Adpsw Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Fedpfx Adjuzv Tzepefw Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Fjdswwip Ajpfx Adpofw Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: Ffodpsqxandsfx Adpjw upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Fjdev Tyr Iepfx Adpsfw Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter Fodpfx Adof Eywwepefw - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. Fedpfohz Twwox Adpefw To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: Ffjdpfjtp H Erjx Adpow The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: used, Metal cabinet, workshop cabinet, storage cabinet with 2 sliding doors VIDMAR BORIK 2 sliding doors with roller guide 6 rotary drawers Drawer dimensions: Depth = 616/480 mm, Width = 380 mm, Height = 20/45 mm Width: 1440 mm Depth: 490 mm Height: 1000 mm Fodjypw Hxspfx Adpofw - Rotary drawers height-adjustable in perforated grid - Without key Weight: approx. 150 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Fsdpfxov R Dxae Adpjfw Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: Z20190361498, Checkweigher from manufacturer: Format1 spol, s.r.o. Custom-built in: 2019 Technical specifications: Year of manufacture: 2019 Weighing range: 400 – 20,000 g Accuracy: 20 g Dimensions: Overall length: 190 cm Overall width: 75 cm Overall height: 70 cm Rubber conveyor belt length: 58 cm – 2x Rubber conveyor belt width: 37.5 cm – 2x Roller conveyor belt length: 58 cm Ffjdpfjx Tgi Ssx Adpsw Roller conveyor belt width: 37.5 cm Weighing sections between roller conveyors: Length: 33 cm Width: 32 cm Control cabinet: Height: 120 cm Depth: 45 cm Width: 50 cm Control panel: Height: 130 cm Depth: 35 cm Width: 40 cm Designed for control weighing of cartons traveling on the conveyor belt with an accuracy of 20g. (Specifically cartons containing glass bottles – for checking full bottles) Cartons can move along the conveyor in close succession, with the conveyor section assigned to the checkweigher separating them for accurate weighing. (Separation operates on the principle of variable speed conveyors – one slower and one faster) Measuring range from 400g to 20,000g (0.4 – 20 kg). If incorrect carton weight is detected, an air cylinder ejects the carton off the conveyor onto a control surface, while the checkweigher issues a warning signal via a red beacon and an audible alarm for operator intervention. (After rejection, the system resumes standard operation, weighing subsequent cartons on the conveyor) Complete machine documentation available. Operating manual included.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 85000290, Mettler Toledo / Garvens Model C3570 Year 2017 Range 0-1500 g Temperature 0 °C / +40 °C 100-240 V~ / 50-60Hz Ffjdpeyr Hhwefx Adpsw Calibration valid until 12/7-25 This model was upgraded in 2020 with a PPU, which rotates the boxes by 90°. This is ideal for small spaces.