Used Metal Baler for sale (35,215)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 300242, cutting range round steel at 90°: 460 mm, total length: 2,320 mm, total height: 2,570 mm, total width: 3,660 mm, overall weight: 7,500 kg, cutting range square steel at 90°: 600,460 mm, cutting diameter: 460 mm, space requirement length: 2,570 mm, space requirement width: 3,660 mm, cutting length (max.): 9,999 mm, working height: 720 mm, section length (max.): 9,999 mm, section length (min.): 8 mm, coolant pump power: 180 W, saw drive: 9,200 W, opening width: 600 mm, saw band width: 54 mm, saw band length: 7,470 mm, additional equipment features: prędkość obrotowa bezstopniowo regulowana, Kaltenbach KBR 460 NA – automatic industrial metal band saw | cutting steel, profiles and tubes Kaltenbach KBR 460 NA is an automatic industrial metal band saw, designed for precise and efficient cutting of round steel, profiles and tubes with large cross-sections. The machine is ideally suited for production plants, steel service centres and metal processing companies. Thanks to the automatic material feed, wide cutting capacity and the heavy-duty, robust construction typical of Kaltenbach, the KBR 460 NA is a reliable solution for batch cutting and continuous production. It ensures high cutting accuracy, excellent repeatability and minimal material waste. Technical data – Kaltenbach KBR 460 NA • Manufacturer: Kaltenbach • Model: KBR 460 NA • Year of manufacture: 2002 • Condition: used, ready for operation Pedpfoyivgdsx Aahopu • Machine type: automatic industrial metal band saw / cold cutting saw • Cutting capacity round at 90°: up to Ø 460 mm • Cutting capacity square at 90°: up to 600 × 460 mm • Cutting length (max.): up to 9,999.9 mm (automatic mode) • Cutting length (min.): from 8 mm • Minimum remnant length: 30 mm (automatic mode) • Band dimensions: 7470 × 54 × 1.3 mm • Cutting speed: continuously adjustable • Working height: 720 mm • Saw drive power: 9.2 kW (standard), optional 7.5 kW • Coolant pump power: 0.18 kW • Overall dimensions (L × W × H): 2320 × 3660 × 2570 mm • Total weight: approx. 7,500 kg Key advantages • high cutting precision thanks to continuously adjustable speed • fully automatic operation with cutting lengths up to 9,999.9 mm • minimal material waste – remnant length from 30 mm • wide cutting range for tubes, profiles and solid material • heavy-duty industrial design for continuous and batch production Each machine offered by us undergoes a technical inspection and operational check prior to sale. The machine is delivered fully functional and ready for operation. Contact us for further information, pricing details or to arrange an inspection of the machine.

Year of construction: 2022, condition: new, machine/vehicle number: 5YXXXX22, SINC MP Series briquetting press machine is the most economical solution for briquetting chip metals by pressing method. It enables you to press by processing the waste chips from CNC and similar machines in the factory. It is not only easy to transport the chips by briquetting instead of powder, but also minimizes metal losses. You can turn chip metals to solidifying and use them as raw materials. * The specifications in photo is for machine that have 60 diameters. Please ask specs for 40 and 80 versions. Ppedpfx Ajihca Doaheu

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Pedpjmqi Akefx Aahspu

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Ppsdpjwvq Tasfx Aahju Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: excellent (used), Bending machine Manual swing-beam bending machine Manufacturer: Gabro Box Folder Type: BF Bending capacity: 500 x 2 mm Steel: 1000 x 1.25 mm By using a split bending beam, boxes with the following dimensions can be produced: 1000 x 570 x 215 mm New price: 2733 Euros Length: 1200 mm Ppodpfxezdp Hxj Aahsu Width: 750 mm Height with pallet: 1400 mm Weight with pallet: 155 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Podpewuk Nrofx Aahspu Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Podjzdn H Rjpfx Aahepu Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Ppsdszdny Repfx Aahou Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Ppsdpszdnxgefx Aahou Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – 400 mm saw blade – Double miter cut – 4 pneumatic clamps – Mist lubrication system – Air blow gun – Protective cover – Documentation – 400V Ppedpfou Si Ndox Aahju

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Ppsdpfx Aaezgdwqsheu Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Ppjdpszgcv Eofx Aahju Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. The saw blade feed is adjustable on this machine. Features: - Automatic sawing motion - Double pneumatic clamping - Saw blade moves from bottom to top - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system Ppodezf U Tmjpfx Aahju - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: good (used), Year of construction: 1986, Metal cutting Tooling VDF BOEHRINGER - DUE 560 MACH-ID 2962 Make: VDF BOEHRINGER Pedpfx Ajzdixksahspu Type: DUE 560 Year: 1986 Max. Diameter:150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, chuck outer diameter: 600 mm, through hole: 120 mm, Metal cutting Tooling ROHM - SDT MACH-ID 2965 Make: ROHM Type: SDT Year: 2007 Ppodpfxszdiwys Aahju Diameter: 600mm 4 chuck: x Spindle bore:120mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling Ppjdpfxszdiv Ae Aahou TOS - SN / SIU MACH-ID 2968 Make: TOS Type: SN / SIU Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Ppjdpfx Aezdiuxoaheu Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm total power requirement 45 kW weight of the machine ca. 5.500 kg Ppsdpfxet Hw Iis Aahou

Condition: good (used), Metal cutting Tooling Pjdpfx Aozdipzjahjpu CU 1000 MACH-ID 2981 Type: CU 1000 Year: 2006 Max. Diameter 300 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, chuck outer diameter: 350 mm, through hole: 100 mm, Metal cutting Tooling LAMBERTINI - 350 MACH-ID 2993 Make: LAMBERTINI Type: 350 Year: 1989 Diameter: 350mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Pedpfszdil Ajx Aahspu

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 MACH-ID 2994 Make: ROHM Pedpezdilpofx Aahjpu Type: 400 Year: 2007 Diameter: 400mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), three-jaw chuck diameter: 380 mm, through hole: 100 mm, Metal cutting Tooling POINTER - 380 SL MACH-ID 2995 Make: POINTER Ppodpfx Aajzdii Ishou Type: 380 SL Diameter: 380mm 3 Chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, chuck outer diameter: 250 mm, through hole: 100 mm, Metal cutting Tooling CBT - 250 MACH-ID 2996 Make: CBT Type: 250 Year: 2013 Diameter: 250mm Ppsdpfx Ajzdiihsahju 3 Chuck: x Spindle bore:100mm Connector: 70 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, chuck outer diameter: 250 mm, through hole: 75 mm, Metal cutting Tooling ROHM - 250 MACH-ID 2997 Make: ROHM Type: 250 Year: 1999 Diameter: 250mm 4 chuck: x Spindle bore:75mm Ppsdpfx Aaezdih Doheu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, chuck outer diameter: 300 mm, through hole: 70 mm, Metal cutting Tooling MANDELLI - 200 MACH-ID 2998 Make: MANDELLI Pjdpfx Aaezdig Uohspu Type: 200 Year: 1998 Diameter: 300mm 4 chuck: x Spindle bore:70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!